Beko HIDG95225SX - Manuals

Page 6 Our company shall not be liable for any problems arising due to the product not being earthed in accordance with the local regulations.  Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!  Never touch the plug with wet hands! Never unplug by...

Page 7 Intended use  This product is designed for domestic use. Commercial use will void the guarantee.  This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.  The manufacturer shall not be liable for any damage caused by improper use or...

Page 8 Disposing of the old product  Compliance with the WEEE Directive and Disposing of the Waste Product: Package information  Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging ...

Page 9 2 General Information Overview The manufacturer strives for continuous improvement. For this reason, technical specifications, text and illustrations in this manual are subject to change without notice. Figures in this manual are schematic and may not match your appliance exactly. 1. AUXILIAR...

Page 10 Package contents User manual Technical specifications Voltage / frequency 220-240 V ~ 50 Hz Cable type / section H05RR-FG 3 x 0,75 mm 2 Cable length max. 2 m Gas type Natural Gas (NG) / pressure G20/2.0 kPa Total gas consumption 12.9 kW Converting the gas type Liquid Petroleum Gas (LPG) / pr...

Page 11 3 Installation Installation must be in accordance with this instruction manual, AS 5601.1 gas installations' for installation and pipe sizing, local gas fitting regulations, municipal building codes, local electrical regulations and any other statutory regulation by an authorised person. NOT...

Page 12 Room ventilation All rooms require a window that can be opened, or equivalent, and some rooms will require a permanent vent in addition. Air for combustion is drawn from the room and the exhaust gases are emitted directly into the room, therefore good room ventilation is essential for the sa...

Page 15 Unless there is an abnormal condition, do not attempt to remove the gas burner taps. You must call an authorised service agent if it is necessary to change the taps. Reduced gas flow rate setting for taps 1. Ignite the burner that is to be adjusted and turn the knob to the reduced position. ...

Page 16 Future Transportation Keep the appliances original carton and transport the appliance in it. Follow the instructions on the carton. If you do not have the original carton, pack the appliance in bubble wrap or thick cardboard and tape it securely. Secure the caps and pan supports with adhesiv...

Page 17 4 Preparation Tips for energy saving The following information will help you to use your appliance in an ecological way, and to save energy:  Defrost frozen dishes before cooking them.  Use pots/pans with cover for cooking. If there is no cover, energy consumption may increase up to 4 ti...

Page 18 5 How to use the hob 1 Auxiliary burner 2 Semi rapid burners 3 Rapid burner 4 Triple crown burner General information about cooking  Before frying foods, always dry them well and gently place into the hot oil. Ensure complete thawing of frozen foods before frying.  Do not cover the pot o...

Page 19 Igniting the gas burners 1. Keep the burner knob pressed in. 2. Turn the knob counter clockwise to the large flame symbol. The gas is ignited with the spark created. 3. Adjust the knob to the desired cooking power. Turning off the gas burners Turn the keep warm zone knob to off (upper) posit...

Page 20 6 Maintenance and care The surface might get damaged by some detergents or cleaning materials. Do not use aggressive detergents, cleaning powders/creams or any sharp objects during cleaning. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they ca...

Page 21 7 Troubleshooting Product emits metal noises while heating and cooling. When the metal parts are heated, they may expand and cause noise. This is not a fault. There is no ignition spark No current. Check fuses in the fuse box. There is no gas. Main gas valve is closed. Open gas valve. Gas pi...