BDI 1192 CWL - Manuals - manualsarea.com

Page 4 - Do not use power tools for the assembly of this product.

4 | BDIUSA.COM REVEAL 1192 PART # C3 DESCRIPTION Cabinet QUANTITY 1 HARDWARE AND COMPONENTS HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [...

Page 5 - ASSEMBLY; Place cardboard end caps back onto the ends of the; REMOVE CARDBOARD END CAPS

BDIUSA.COM | 5 NEED ASSISTANCE? [email protected] ASSEMBLY Making sure the glass tabletop is facing up, remove the cardboard end caps and microfilm. IMPORTANT! Save the end caps. Open the glass lid by lifting and pulling forward. Remove the inner carton. Close the tabletop. Place cardboard end caps ...

Page 6 - QTY; Attach two; ATTACH LEG PLATES

6 | BDIUSA.COM REVEAL 1192 ASSEMBLY PART/DESCRIPTION QTY T1-HEX WRENCH 1 H1-SCREW 8 Attach two (C1) Leg Plates to the tops of the (C2) Legs using (H1) Screws . Make sure the countersink is facing away from the leg. Tighten with (T1) Hex Wrench . C2 H1 C1 C1 H1 H1 H1 C1 C2 STEP 2. ATTACH LEG PLATES

Page 7 - ATTACH LEGS

BDIUSA.COM | 7 NEED ASSISTANCE? [email protected] ASSEMBLY STEP 3. ATTACH LEGS PART/DESCRIPTION QTY T1-HEX WRENCH 1 H2-SCREW 16 With help from another person, carefully rotate (C3) Cabinet onto its back, making sure that the cardboard end caps stay in place (to prevent the tabletop from opening by i...

Page 8 - FINE TUNING; With help from another person, carefully rotate the; REMOVE END CAPS; Finger slot

8 | BDIUSA.COM REVEAL 1192 FINE TUNING With help from another person, carefully rotate the (C3) Cabinet onto its base, ensuring that the cardboard endcaps stay in place. Now, remove both of the end caps. REMOVE END CAPS Finger slot faces sofa 2 PERSON TASK C3

Page 9 - C A U T I O N; TABLE TOP LOAD CAPACITY; The preinstalled; Levelers

BDIUSA.COM | 9 NEED ASSISTANCE? [email protected] FINE TUNING CAUTION! Do not move the table with the tabletop in its extended position. Moving the table by its base is recommended.Position the table approximately 12"–14" away from your sofa with the finger slot facing the opening direction....

Page 11 - To view BDI’s complete warranty information, visit

BDIUSA.COM | 11 NEED ASSISTANCE? [email protected] WARRANTY PRODUCT REGISTRATION BDI warrants to the original purchaser that for the below-stated warranty term, BDI will repair or replace any product, part, or component covered by this warranty that fails under normal use as a result of a defect in ...

BDI 1192 CWL - Manuals

Manuals:

User Manual BDI 1192 CWL

Summary

BDI Table Clocks Manuals