Axor 06090XX0 - Manuals - manualsarea.com

Page 2 - Accessories C, Accessories S

2 06092XX0 Soap Dispenser 06091XX0 Soap Dish 06090XX0 Tumbler 06096XX0 Face Cloth Hook 06099XX0 Robe Hook 06093XX0 Toilet Paper Holder 06094XX0 Toilet Brush 06095XX0 Towel Ring 06097XX0 12” Towel Bar 06098XX0 24” Towel Bar Accessories C, Accessories S 04063XX0 Toilet Paper Holder

Page 3 - Using the mounting piece as a template, mark the; Do not press the mounting piece into; Install the mounting piece with the notch

3 If the accessory is installed in the shower, seal the wall around the anchors with waterproof sealant.Failure to seal the wall can lead to possible water damage. Installation 06092XX0, 06091XX0, 06090XX0, 06093XX0, 06094XX0, 06095XX0, 06097XX0 / 06098XX0, 04063XX0 Using the mounting piece as a tem...

Page 4 - To remove the accessory from the wall; Other accessories and towel bars:

4 To remove the accessory from the wall 06097 Towel bar only: Use the allen wrench to loosen the set screw (1). Pull the accessory away from the wall (2). Other accessories and towel bars: Press the accessory firmly over the mounting piece.The retaining pin in the accessory will snap into place, hol...

Page 5 - Drill the hole using a 6 mm bit suitable for the wall

5 If the accessory is installed in the shower, seal the wall around the anchors with waterproof sealant.Failure to seal the wall can lead to possible water damage. Installation 06096XX0, 06099XX0 Drill the hole using a 6 mm bit suitable for the wall surface. Install the anchor. Screw the hook to the...

Page 6 - Accessories E

6 Mark the positions of the screw holes on the wall. Drill the screw holes using a 6 mm drill bit. Installation 06593XX0, 06589XX0, 06592XX0, 06600XX0 If the accessory is installed in the shower, seal the wall around the anchors with waterproof sealant.Failure to seal the wall can lead to possible w...

Page 7 - If the accessory is installed in the

7 Installation 06596XX0 Mark the positions of the screw holes.Drill the screw holes using a 6 mm bit suitable for the wall surface. Install the anchors. Screw the support into the anchors. The pin on the support should be on the bottom. Slide the cover over the support. The pin on the support clicks...

Page 8 - Install the anchors.

8 Installation 06594XX0, 06595XX0 Installation 06598XX0, 06866XX0 Mark the positions of the screw holes on the wall. Drill the screw holes with a 6 mm drill bit Mark the positions of the screw holes. Drill the holes using a 6 mm drill bit. Install the anchors. Screw the hook into the wall.Slide the ...

Page 9 - Lift the pump assembly off the bottle. Fill the bottle. Replace

9 Fill soap dispenser 06593XX0, 06092000 Lift the pump assembly off the bottle. Fill the bottle. Replace the pump assembly. Install the anchors. If the accessory is installed in the shower, seal the wall around the anchors with waterproof sealant.Failure to seal the wall can lead to possible water d...