Axor 04172XX0 - Manuals

5 If the supplies are not connected to the correct inlets, the valve cannot function properly! Both outlets must be plumbed! Install the hot and cold water supply lines* Wrap the threads on the hot and cold supply pipes with Teflon tape. Install the hot and cold supplies to the corresponding inlets....

6 Install the valve trim Remove the plaster shield. Push the escutcheon over the valve.Install the handle. Tighten the screw with a 3 mm Allen wrench. The screw must engage the slot on the cartridge.Justify the handle.Set the high temperature limit stop, if required. Justify the handle Turn the wate...

7 Set the high temperature limit stop (optional) Turn the water on to the tub spout or handshower. Use a 3 mm Allen wrench to loosen the handle screw. Remove the handle from the valve. Carefully remove the retainer clip and the limit stop ring (1). Turn the temperature control stem until the water i...

8 Maintenance: Clean the filters CAUTION: Turn off the water at the main or with the service stops, before opening the valve.Remove the handle and escutcheon. Failure to hold the stop unit steady while unscrewing or replacing the thermostat cartridge will result in damage to the stop unit. Grasp the...

9 Justify the handle. User instructions From the off position, turn the diverter lever clockwise or counter-clockwise to obtain water from either of the two functions. Turn the temperature control knob clockwise to make the water cooler. Turn it counter-clock- wise to make the water warmer. When tur...

10 1 cartridge with shutoff unit 88586000 2 thermostat cartridge 94282000 3 Solaris handle 88528XX0 4 Stratos handle 88543XX0 5 Metro handle 88548XX0 6 Talis handle 88549XX0 7 Cross handle 88608XX0 8 Scroll handle 88609XX0 9 Lever handle 88610XX0 10 Metris handle 11 Focus handle 12 escutcheon 13 All...