Page 2 - Unica’E Wallbar; Clubmaster
Unica’E Wallbar 06510XX1 vacuum breaker -- included with 04043XX1, 04044XX1, 04098XX1 only Follow the installation instructions (see page 4) when drilling the mounting holes. Croma E 75 3-Jet Croma E 75 -Jet Clubmaster Raindance E 10 AIR 3-Jet Monsoon II
Page 3 - Croma E 75 3-Jet handshower
3 Installation Considerations For best results, Hansgrohe recommends that this unit be installed by a licensed, profes- sional plumber.Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation.The ...
Page 4 - Wallbar installation; Seal the wall around the anchors
4 Wallbar installation Remove the screw covers from the wallbar.Position the wallbar in the desired location. Mark the positions of the screw holes (1).Place the wallbar in a safe location.Drill the holes with a 6 mm bit (). Seal the wall around the anchors with waterproof sealant.Failure to seal th...
Page 5 - Install the vacuum breaker (Models; Install the vacuum breaker and washer on the
5 06494XX0/06496XX0 only: Place a black rubber washer in one end of the handshower hose. Connect this end to the wall supply (not included).Place a second washer in the other end of the hose. Connect this end to the handshower.Rest the handshower in the holder. Install the vacuum breaker (Models 040...
Page 6 - User Instructions
6 User Instructions Do not remove the handshower by pulling “out” on it. This will damage the handshower holder. To remove the handshower from the holder, pull “up” on it until the nut at the end of the handshower hose clears the holder, before pulling “out”. To move the slider up and down the bar, ...
Page 7 - Handshower user instructions
7 Handshower user instructions Clubmaster only: Turn the function ring until the desired function is achieved. All other models: Push the function lever until the desired function is achieved function lever function ring
Page 8 - Scale Removal
8 Rinse the handshower with clear water. Reinstall the handshower. Turn on the water and allow the handshower to flush for at least one minute. Scale Removal This handshower incorporates the Quick Clean cleaning system. If scale deposits are noticed in the spray channels, turn the water on lightly a...
Page 9 - Replacement Parts
9 Replacement Parts 1 slider 88590XX0 screw cover 88534XX0 3 tile spacer (optional) 96184000 4 handshower hose, 63” 876XX0 handshower hose, 7” 8865XX0 5 Croma E 75 -jet handshower 8570XX1 6 Croma E 75 3-jet handshower 8573XX1 7 Clubmaster handshower 855XX1 8 Raindance E 10 3-jet handshower 8507XX1 9...