Avenview SW-DVI-16X16 - Manuals

Avenview SW-DVI-16X16 – Manual in PDF format online.

Manuals:

Manual

Manual Avenview SW-DVI-16X16

Summary

Page 2 - Table of Contents

www.avenview.com 2 Table of Contents Section 1: Getting Started ...................................................................................................................... 4 1.1 Important Safeguards .............................................................................................

Page 4 - Section 1: Getting Started; Important Safeguards; What the warranty does not cover; Safety Instructions

www.avenview.com 4 Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover  Any product, on which the serial number has been defaced, modified or removed. ...

Page 6 - Section 2: Installation; Device Operation; Front Panel

www.avenview.com 6 Section 2: Installation Follow these instructions for installation of SW-DVI-16X16: 1. Mount or fix the SW-DVI-16X15 safely 2. Connect the SW-DVI-16X16 to included external power supply (50Hz 200V) through the power cable 3. If controlling the SW-DVI-16X16 through RS232 port then ...

Page 7 - Example 1: To Switch Input Channel 2 to Output Channel 15

www.avenview.com 7 2.1.3 Lock or Unlock the Panel If the panel is locked, press the LOCK button will unlock the panel or if panel is locked then press the LOCK button to unlock it. The LED display will show lock or unlock status as shown in the figure below. 2.1.4 Switch Input Channel to Output Chan...

Page 8 - Example 2: Turn OFF Output Channel 15; Macro Operation

www.avenview.com 8 LOCK the panel when finished setting the channel. Example 2: Turn OFF Output Channel 15 1. Unlock the panel if the panel locked 2. Select operation format 3. Select output channel 4. Set input channel to be “OFF” in the same way as selecting input channel. Then finish to off outpu...

Page 10 - Test Signal Board

www.avenview.com 10 2.1.6 Test Signal Board 1. The output resolution is up to the two bits of DIPs on the test signal board. DIPS BIT 1 BIT2 OFF OFF Output Resolution: 1600x1200x60Hz OFF ON Output Resolution: 1280x1024x60Hz ON OFF Output Resolution: 1280x960x60Hz ON ON Output Resolution: 1152x864x75...

Page 11 - Other Functions; Example: Check Device Input Channel Signal

www.avenview.com 11 2.1.7 Other Functions If the panel locked, the device will have a bell warning when press the MENU button, or if the panel unlocked, the LED will display the MENU menu as the following figure 14 when press the MENU button. ① Check device information about input signal and output ...

Page 12 - Section 3: System Management; Description; Address; Control by Network; Set a new parameter of the IP address according to the existing one:

www.avenview.com 12 Section 3: System Management 3.1 Description SW-DVI-16X16 can be managed by two different ways: RS232 or through Network (IP) 3.1.1 Control by RS232 1. Male 9-Pin D Connector: Pin 2: RXD (Receive) Pin 3: TXD (Send) Pin 5: GND (Ground) Other Pins: N/A 2. Baud Rate: 9600 bit/s, 8 b...

Page 13 - Set a new parameter of IP address according to device’s MAC address:

www.avenview.com 13 b. According to the DOS direction, input the command: telnet 192.168.0.104 9999 (192.168.0.104 9999 is the current device’s IP address) then the information shows as follows. The serial code of produce: XXXXXXX MAC address: XX ： XX ： XX ： XX ： XX ： XX Vision number of Software: X...

Page 14 - Explanation of character

www.avenview.com 14 b. According to DOS direction, Input the command: arp -s 192.168.0.123 XX-XX-XX-XX-XX-XX ( 192.168.0.123 is temporary address; XX-XX-XX-XX-XX-XX is the MAC address of equipment) and press, “enter”. c. Input “telnet 192.168.0.123 1 ” d. Input “telnet 192.168.0.123 9999”. After tha...

Page 15 - Commands

www.avenview.com 15 5. Output data 1~N It symbolized codes of output ports; the range is from 0x00 to the maximum number that the device supports. 6. Input data 1~N It symbolized codes of input ports; the range is from 0x00 to the maximum input number that the device supports. 00x0 means input No.1;...

Page 19 - Command 0x0c

www.avenview.com 19 Note: The range of Output Number is as same as the Note 2 of command 0x02 For example ： Tie an appointed output channel to the Preset Input Channel Commands: 0xeb, 0x90, 0x06, 0x01, 0x04 Response: 0xeb, 0x90, 0x06, 0x01, 0xfa, Redundancy Explanation: The output channel 5 has been...

Page 22 - Communication Format B

www.avenview.com 22 equipment has not been initialized; If the mark value is 0x01, then the equipment has been initialized, but the module is still without power: If the mark value is 0x02, then the equipment already power on and work well. Note: The Baud Value of serial port is fixed 0x00, it stand...

Page 23 - Tie single input channel to single output channel

www.avenview.com 23 2. ASCII Character Table Char. ASCII Val Char. ASCII Val Char. ASCII Val Char. ASCII Val Char. ASCII Val DEC HEX DEC HEX DEC HEX DEC HEX DEC HEX Esc 27 1B 1 49 31 E 69 45 Y 89 59 m 109 6D CR 13 0D 2 50 32 F 70 46 Z 90 5A n 110 6E LF 10 0A 3 51 33 G 71 47 [ 91 5B o 111 6F Space 32...

Page 24 - Macro command

www.avenview.com 24 Commands sent by PC: 1*3& Response by the device: Out03·In01·DVI ↵ Tie multiple input channels to multiple output channels Function Tie multiply input channels to multiply output channels Format [ESC] Q [X3]*[X2]! … [X3]*[X2]! ← Response Out·Multi·In·Multi·All ↵ For example: ...

Page 27 - Section 4: Maintenance; Replace the Fuse; Problem; Power LED is not ON

www.avenview.com 27 Section 4: Maintenance 4.1 Replace the Fuse There is a spare fuse hidden in the power socket. Pull out the power cord and open the place showed on the picture, then pull out the fuse socket and put in a new fuse. 4.2 General Troubleshooting Problem Reason Possible Solution Power ...

Page 28 - Section 5: Specifications

www.avenview.com 28 Section 5: Specifications Description Input Connector DVI-D x 16 Output Connector DVI-D x16 Network Connector RJ45 RS232 Connector DB9 Male Input Resolution 1600x1200x60Hz Supported Input Signal DVI 1.0 Supported Output Signal Same as Input Standard Pixel Clock Frequency 24MHz – ...