Avenview HDMI-C5-SR - Manuals

Page 2 - Table of Contents

www.avenview.com 2 Table of Contents Getting Started ....................................................................................................................................... 3 Key Features ...................................................................................................

Page 3 - Getting Started; a great solution; Key Features

www.avenview.com 3 Getting Started The Cat5 HDMI Extender system consists of Transmitter, Transceiver and Receiver. The system can extend HDMI signals over Cat 5 / 5e / 6 FTP cable. By cascading Transceivers, it is possible to extend the HDMI signals to almost any length. The Cat5 HDMI Extender syst...

Page 4 - System Devices and Functions; Built-in one HDMI input

www.avenview.com 4 System Devices and Functions Transmitter HDMI-C5-S and Transceiver HDMI-C5-SR a. Built-in one HDMI input b. Built-in one HDMI output for Local Monitor c. Built-in one RJ45 port for system output which can be connected by Cat 5 / 5e / 6 cable and send signal to System Receiver 4 / ...

Page 5 - Panel Description

www.avenview.com 5 Panel Description Transmitter HDMI-C5-S and Transceiver HDMI-C5-SR

Page 7 - HDMI Cable and Cat 5 HDMI Receiver

www.avenview.com 7 HDMI Cable and Cat 5 HDMI Receiver

Page 8 - Installation and Operation; Turn off the HDMI output device and monitors.; Make sure the remote monitor(s) connected the Transceiver and

www.avenview.com 8 Installation and Operation Transmitter HDMI-C5-S Single-Port Installation a. First Time Setup: Turn off the HDMI output device and monitors. b. Device Connection: Connect local HDMI monitor (M1) to the “HDMI/M1 OUT” of the transmitter. Take the HDMI cable, plug one end to “HDMI IN...

Page 9 - HDMI signal can be extended/cascaded over “LINK OUT” port by Cat 5 / 5e / 6

www.avenview.com 9 e. EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ control anti-clockwise. The “EQ” and “Auto” LEDs will display blue. f. LINK OUT: HDMI signal can be extended/cascaded over “LINK OUT” port by Cat 5 / 5e / 6 cable. The signal can be received by:  HDMI...

Page 10 - The RJ45 “LINK IN” port is designed to receive the HDMI signal from

www.avenview.com 10 Transceiver HDMI-C5-SR Installation a. Monitor Connection: Connect HDMI monitor’s HDMI cable to Transceiver and turn on the monitor. b. Device Connection: Plug power adapter to HDMI-C5-SR, the “PWR” LED and “M1 LINK” will turn ON. The “LINK IN” LED should turn off since there is ...

Page 11 - The function of “LINK OUT” port on Transceiver will act the same as

www.avenview.com 11 d. EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ control anti-clockwise. The “EQ” and “Auto” LEDs will display blue. e. LINK OUT: The function of “LINK OUT” port on Transceiver will act the same as Transmitter’s. It can extend/cascade HDMI signal to...

Page 12 - The “HDMI IN” can receive HDMI signal from a Standard HDMI Output

www.avenview.com 12 HDMI-C5-4 / HDMI-C5-8 Multiport Transceiver Installation a. Monitor Connection: Connect HDMI monitor’s HDMI cable to Multi-Port Transceiver’s “HDMI/LOCAL OUT” port and turn the monitor ON. b. Device Connection: Plug power adapter to Multi-Port Transceiver, the Front Panel’s “POWE...

Page 13 - / 8 HDMI monitors can be connected to the “RJ-45 HDMI OUT”

www.avenview.com 13 d. EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ control anti-clockwise. The “EQ” and “Auto” LEDs will display blue. e. LINK OUT: The function of “LINK OUT” port on Multi-Port Transceiver is to cascade HDMI signal to one-port HDMI Transceiver or ano...

Page 14 - Addition System Expansion:; Selection of Cable; JACK POSITION

www.avenview.com 14 g. Addition System Expansion: The “RJ-45 HDMI OUT” port can also be used as link out port for more system expansions. Selection of Cable a. Selection: Most makes and versions of Cat 5/5e/6 cables will work with DVI-C5-S Transmitter and DVI-C5-R Transceivers. However, since the qu...

Page 15 - Installation of Multiple Transceivers and Displays; the system almost indefinitely to remote HDMI displays.

www.avenview.com 15 d. Connect UTP Cable: Plug one end of the cable to Transmitter’s “LINK IN/OUT” port and the other end to the Transceiver’s RJ45 “LINK IN/OUR” port. The monitor connected to the Transceiver should now display and the “LINK” or “ACTIVE” LED should turn Green to indicate the HDMI si...

Page 16 - Receiver’s connected monitor.; General Troubleshooting; Screen Defects Appear; Display

www.avenview.com 16 e. Function Test: After above installation, you will be able to broadcast the HDMI signal to Receiver’s connected monitor. General Troubleshooting Problem Possible Solution Screen Defects Appear  Check your current resolution, refresh rate and color depth settings in the Setting...

Page 17 - Specifications

www.avenview.com 17 Specifications Model HDMI-C5-S HDMI-C5-SR HDMI-C5-4 HDMI-C5-8 Description 1 Port HDMI Transmitter 1 Port HDMI Transceiver 4 Port HDMI Transceiver 8 Port HDMI Transceiver Input HDMI Female x 1 RJ45 x 1 HDMI Female x 1 HDMI Female x 1 Output HDMI Female x 1 RJ45 x 1 HDMI Female x 1...