Avenview DVI-VIDEOWALL-4 - Manuals

Avenview DVI-VIDEOWALL-4 – Manual in PDF format online.

Manuals:

Manual

Manual Avenview DVI-VIDEOWALL-4

Summary

Page 2 - Table of Contents

www.avenview.com 2 Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards .............................................................................................

Page 3 - Section 1: Getting Started; Important Safeguards; What the warranty does not cover; Safety Instructions

www.avenview.com 3 Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover  Any product, on which the serial number has been defaced, modified or removed. ...

Page 4 - Introduction

www.avenview.com 4 1.4 Introduction The DVI-VIDEOWALL-4 Display Dual-Image Video Wall Processor is a powerful and fully real time data/video processor for multiple flat panel displays or projectors. With the most flexibility on the input side, the unit accepts VGA, DVI, CVBS, S-Video, and YPbPr and ...

Page 5 - Inputs and Outputs; Rear Panel

www.avenview.com 5 1.5 Package Contents Before you start the installation of the converter, please check the package contents. - DVI-VIDEOWALL-4 x 1 - DVI to DVI/VGA Y-Cable x 1 - VGA to Component Adapter x 1 - DVI to VGA Adapter x 1 - 30cm DVI to DVI Cable x 1 - RS232 to USB Adapter x 1 - Software ...

Page 6 - Input Connectors; DVI IN; VGA; Composite; x DVI; Display; Before Installation

www.avenview.com 6 1.6.2 I/O Connectors Connectors Video Source Input Connectors DVI IN DVI VGA (DVI to VGA Adapter) Component (YPbPr) (DVI to VGA Adapter and VGA to Component Adapter) 1 x DVI 1 x VGA (DVI to DVI/VGA Y Cable 1 x DVI 1 x Component (DVI to DVI/VGA Y Cable and VGA to Component Adapter)...

Page 7 - Section 2: Installation

www.avenview.com 7 Section 2: Installation Follow these instructions for installation of DVI-VIDEOWALL-4: 1. Mount or fix the DVI-VIDEOWALL-4 safely 2. While DVI-VIDEOWALL-4 switched off, connect monitors/projectors or other DVI displays by using 1 male to male high quality DVI cable to DVI-VIDEOWAL...

Page 8 - Software Installation and Setup; System Requirements

www.avenview.com 8 2.1 Software Installation and Setup 2.1.1 System Requirements 1. The DVI-VIDEOWALL-4 provides a software control program which runs under Microsoft Windows 98, 2000, XP through the interface of RS-232 serial control. 2. Before you click on the icon of the software, make sure you h...

Page 10 - Software Operation; File

www.avenview.com 10 2.1.3 Software Operation The software has following menu options available: 1. File a. Connect b. Save Settings c. Load Settings d. IR Control e. Auto Sleep f. Device ID g. Factory Reset h. Exit 2. Background a. Resolution b. Layout c. HFlip d. VFlip e. SWAP f. Color 3. Main a. I...

Page 11 - Background

www.avenview.com 11 c. Load Setting: The function will load the favorite settings from the previously saved file. d. IR Control: This will enable or disable the IR remote control. e. Auto Sleep: This decides if the DVI-VIDEOWALL-4 enters the deep sleep mode if the video signal cannot be detected in ...

Page 13 - Control-Setting Dialog; Border

www.avenview.com 13 f. Pause: Freeze the display of the sub channel. 5. Control-Setting Dialog a. Border Select main or sub channel for further settings “Clear All”: Clear all OSD items “Apply”: Apply the settings 1. Border Color: Setup border’s color by clicking on “Color setting”. 2. Border Width:...

Page 16 - Zoom

www.avenview.com 16 d. Zoom 1. Select the main or sub channel. 2. Default: Restore the selected channel without zoom effect. 3. This slider controls the ratio of Zoom. 4. The workplace for controlling the displayed area after zooming the selected video.

Page 17 - Pattern

www.avenview.com 17 e. Pattern 1. While “Pattern Model” is chosen, the output will display the selected pattern. While unselecting this item, the output display works normally. 2. The orange border indicates which pattern is currently selected. Users can choose one of the provided patterns by moving...

Page 18 - EDID Code

www.avenview.com 18 f. HS / VS Delay 1. Select the main or sub channel. 2. The fine movement of the selected channel. g. EDID Code 1. Save: Save the read back EDID Content in PC. 2. Setting: Automatically setup the output resolution according to the content of EDID. *This setting is according to the...

Page 19 - Control Display Layout

www.avenview.com 19 Control Display Layout Users can define the resolution of the output video to displays. X Total & Y Total

Page 21 - Cascading Multiple Devices

www.avenview.com 21 In “Temperature Type”, there are two types of temperature representation, Celsius and Fahrenheit, for the VFD display. 2.2 Cascading Multiple Devices The DVI-VIDEOWALL-4 has a dual view processor, which allows you to see 2 videos on the same screen. When you add an additional DVI...

Page 22 - Section 3: Specifications and Supported Resolutions; Specifications; Model

www.avenview.com 22 Section 3: Specifications and Supported Resolutions 3.1 Specifications Model DVI-VIDEOWALL-4 Description 4 Display Dual Image Video Wall Processor Output Displays 4 Dual Output Support Yes (DVI & VGA) Video Loop Out Yes Video Bandwidth DVI Single Link - 4.95Gbps VGA - 165 MHz...

Page 23 - Supported Resolutions

www.avenview.com 23 3.2 Supported Resolutions The following resolutions are supported by DVI-VIDEOWALL-4 3.2.1 DVI-IN 3.2.2 VGA Supported Mode Resolution NTSC/480i/525i 720x240 @60Hz PAL/576i/625i 720x288 @50Hz 480p/525p 720x483 @60Hz 480p (16:9) 960x483 @60Hz 576p/625p 720x756 @50Hz (HDTV) 720p 128...

Page 25 - Section 4: General Troubleshooting; Problem; No Power; No or Distorted Image

www.avenview.com 25 Section 4: General Troubleshooting Problem Possible Solution No Power  Ensure that DVI-VIDEOWALL-4 is plugged in  If you are recovering from power outage, accidentally unplug the adapter or other power surge conditions, leave the device off for a while and then power it on agai...