Avenview Cat5 - Manuals - manualsarea.com

Page 2 - Table of Contents

www.avenview.com 2 Table of Contents Getting Started ....................................................................................................................................... 3 Key Features ...................................................................................................

Page 3 - The system consists of a Transmitter and one or more Transceivers

www.avenview.com 3 Getting Started The Cat5 DVI-D Extender system consists of a Transmitter and one or more Transceivers. The system can extend DVI-D signals over Cat5/5e/6 cable. By cascading Transceivers it is possible to extend the DVI-D signal to any length. By taking advantage of low-cost Cat5/...

Page 4 - System Devices and Functions; Built-in EQ control to adjust the video quality

www.avenview.com 4 System Devices and Functions Transmitter DVI-C5-S a. Built-in EQ control to adjust the video quality b. Built-in one RJ45 DVI Output c. Built-in one RJ45 port for system output which can be connected by Cat 5 / 5e / 6 cable and send signal to System Receiver Transceiver DVI-C5-R d...

Page 5 - Panel Description

www.avenview.com 5 Panel Description DVI-C5-S Transmitter and DVI-C5-R Transceiver

Page 6 - Cable and Accessories; DVI-HDMI Cable for Player; Installation and Operation; Turn off the DVI output device (PC or DVD Player) and monitors.

www.avenview.com 6 Cable and Accessories DVI-HDMI Cable for Player Installation and Operation DVI-C5-S Transmitter Installation a. First Time Setup: Turn off the DVI output device (PC or DVD Player) and monitors. b. Device Connection: Connect local DVI monitor (M1) to the “DVI/MI OUT” of the Transmi...

Page 7 - First Time Connection:; Connect DVI Monitor’s DVI Cable to the receiver and TURN ON the

www.avenview.com 7 e. EQ Adjustment: You can adjust the EQ control to Auto mode by rotating the EQ control Anticlockwise . The “EQ” and “AUTO” LEDSs will display blue. f. EDID Simulation: The Transmitter has built-in EDID simulator. When local DVI monitor is connected to Transmitter, it will automat...

Page 8 - Selection of Cable; A Cat 5/5e/6 cable with a skew lower than 15ns/100m should enable a

www.avenview.com 8 Selection of Cable a. Selection: Most makes and versions of Cat 5/5e/6 cables will work with DVI-C5-S Transmitter and DVI-C5-R Transceivers. However, since the quality and characteristics of Cat 5/5e/6 cables varies it has been found that some perform better than others. The major...

Page 9 - JACK POSITION

www.avenview.com 9 c. Termination: The RJ45 terminations to the Cat 5/5e/6 cable must be made to the EIA 568B specifications. 1. Orange White 2. Orange 3. Green White 4. Blue 5. Blue White 6. Green 7. Brown White 8. Brown The EIA/TIA definition of 568B in the pin assignment JACK POSITION PAIR 2 PAIR...

Page 10 - Plug one ends of UTP cable to DVI-C5-S Transmitter’s “LINK IN/OUT”; Extending Audio Signals:; General Troubleshooting

www.avenview.com 10 d. Connect the Cable: Plug one ends of UTP cable to DVI-C5-S Transmitter’s “LINK IN/OUT” port and the other end to the DVI-C5-R Transceiver’s “LINK IN/OUT” port. The monitor connected to the Transceiver should now display and the “LINK” LED should turn green to indicate the DVI s...

Page 12 - Specifications; DVI Transmitter and Transceiver; Port DVI-D Transmitter

www.avenview.com 12 Specifications DVI Transmitter and Transceiver Model DVI-C5-S DVI-C5-R Description 1 Port DVI-D Transmitter 1 Port DVI-D Transceiver Input HDMI (DVI – HDMI Connector) RJ45 x 1 Output DVI Female x 1, RJ45 x 1 DVI Female x 1, RJ45 x 1 Max Distance and Resolution With each cascading...