Avanti WD362BP - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS

3 TABLE OF CONTENTS Help Us Help you 4 Parts and Features 5 Important Safety Instructions 6 Electrical Connection 6 Installation Guidelines 6 Height Adjustment Platform 7 – 8 Operation Instructions 9 Before Using Your Water Dispenser 9 Operating Your Water Dispenser 10 Replacing the Water Bottle 10 ...

Page 5 - PARTS AND FEATURES; HEIGHT ADJUSTMENT PLATFORM

5 PARTS AND FEATURES HEIGHT ADJUSTMENT PLATFORM 1. WATER INTAKE 2. HOT WATER LIGHT (RED) 3. POWER INDICATOR (YELLOW) 4. COLD INDICATOR LIGHT (GREEN) 5. HOT WATER FAUCET (PINK) 6. COLD WATER FAUCET (GREY) 7. REMOVABLE DRIP TRAY 8. ADJUSTABLE FOOT 9. COOLING SWITCH 10. HEATING SWITCH 11. CONDENSER COI...

Page 6 - Important Safety Instructions; WARNING; Read all instructions before using the water dispenser.; Electrical Connection; Do not use an adapter plug with this appliance.; INSTALLATION GUIDELINES:; Remove the exterior and interior packing.

6 Important Safety Instructions  WARNING  To reduce the risk of burns, fire, electrical shock, or injury when using your appliance, follow these basic precautions: • Read all instructions before using the water dispenser. • Never clean parts with flammable fluids. The fumes can create a fire hazar...

Page 7 - Height Adjustment Platform; Fig 2a

7 Height Adjustment Platform  To make the water dispenser faucets more accessible your unit has been supplied with a height adjustment platform. The platform requires assembly as shown below. Parts Provided: 1 Front Panel 1 Back Panel 1 Stability Ring (located on the top foam cover) 2 Short Screws ...

Page 8 - Fig 2b

8 c) Be sure that both the clips on each side of the platform and the screw holes align correctly before inserting the clips in their respective slots on the stability ring as shown in Fig 2b. Fig 2b d) Once you have assembled both the platform and stability ring together, using the screws (2 short)...

Page 10 - OPERATING YOUR WATER DISPENSER; Steps to replace water bottles; Use a clean cloth to wipe off neck of bottle.; Cold Water Control

10 OPERATING YOUR WATER DISPENSER  Steps to replace water bottles • Use a clean cloth to wipe off neck of bottle. • Remove cap. • Carefully lift bottle (approx. 40 lbs.) using your legs and not your back. Do not place hands on opening of bottle while placing in reservoir. • Insert the water bottle ...

Page 11 - PROBLEMS WITH YOUR WATER DISPENSER

11 CARE AND MAINTENANCE • W ash the inside of the reservoir with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. • The drip tray and water faucets should be cleaned with mild detergent and warm water. • At regular intervals or onc...

Page 12 - WIRING DIAGRAM

12 SERVICE FOR YOUR WATER DISPENSER W e are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti appliances. W ith the purchase of your Avanti appliance, you can have the confidence that if you ever need additional informa...

Page 13 - WHAT IS COVERED; Incidental or consequential damages.; WHAT IS NOT COVERED

13 YOUR Avanti Products WARRANTY Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty. WHAT IS COVERED LIMITED ONE-YEAR WARRANTY For one year from the date of purchase by the original owner, Avanti Products will, at its option, repair or replace ...

Page 14 - F) ALINEE LA PLATAFORMA ENSAMBLADA CON LA PARTE INFERIOR DEL ARO DE

14 INSTRUCCIONES EN ESPAÑOL PLATAFORMA PARA AJUSTE DE ALTURA  PARA PERMITIR QUE EL GRIFO DE SU DISPENSADOR DE AGUA SEA MAS ACCESIBLE, SU UNIDAD CUENTA CON UNA PLATAFORMA PARA AJUSTE DE ALTURA. LA PLATAFORMA REQUIERE ENSAMBLAJE TAL COMO SE ENSEÑA ABAJO. RETIRE TODAS LAS PARTES Y LOS MATERIALES DE EM...

Page 15 - G) ASEGURESE QUE AMBOS CLIPS EN LOS LADOS DE LA PLATAFORMA Y LOS; H) UNA VEZ QUE HAYA ENSAMBLADO Y ASEGURADO LA PLATAFORMA Y EL ARO DE

15 G) ASEGURESE QUE AMBOS CLIPS EN LOS LADOS DE LA PLATAFORMA Y LOS ORIFICIOS PARA LOS TORNILLOS SE ALINEEN CORRECTAMENTE ANTES DE INSERTAR LOS CLIPS EN SU LUGAR RESPECTIVO DEL ARO DE ESTABILIDAD COMO SE MUESTRA EN LA FIG 2B. Fig 2b H) UNA VEZ QUE HAYA ENSAMBLADO Y ASEGURADO LA PLATAFORMA Y EL ARO D...

Page 19 - Registration Information

19 Registration Information Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days of purchase and receive these important benefits:  Protect your product: W e will keep the model number and date of purchase of your new Avanti product on file to h...

Page 20 - PRINTED IN CHINA