Avanti K-600HW - Manuals

1.8 Test & Commission. After the wiring has been completed re-connect the battery to the terminals marked Batt + - The panel will now go into alarm condition, enter user code ( 0123 ) to silence, the Tamper and Power will be lit and Day & Zone LED’s flashing. To reset the panel re-enter the ...

3 Operation 3.1 Programs The Avanti provides the facility for up to 3 programs that can be selected by entering the A , B or * keys after entering the user code when setting the system. The * program is used for Full Set. If no program is selected when setting the system the Avanti will default to P...

4 Engineer Programming Once the engineers access code ( 9999 ) has been entered from within DAY mode, the Day LED will be extinguished, and all 8 Zone LED’s will flash to prompt for the selection of the menu setting to be changed. The following is a list of configurable menus available within the en...