AudioSource ACLCR6C - Manuals

After selecting the mounting location, mark the hole to be cut out. A template is provided in the speaker box. Locate and align the template, then mark with pencil on the ceiling surface. If you are unsure whether there are obstructions behind the ceiling surface where the speakers are to be mounted...

3 Tighten all four of the mounting screws in the same manner until the speaker is properly aligned and held tight to the ceiling surface. Painting the Speaker A p a i n t s h i e l d i s i n c l u d e d i n e a c h A C L C R 6 C speaker package. Place the paint shield inside the frame to protect the...

4 ACLCR6C Specifi cations Woofers 6.5” Carbon Filled Poly Cone w/Butyl Surround Tweeter Pivoting 25mm Elastomer Deposited Silk Frequency Response 55Hz to 18kHz Impedance 8 Ohm Sensitivity 92dB, 2.83V @1m Power Capacity 10 to 150 Watts Outer Dimension 9.38” (237mm) diameter Cut Out Dimension 8.13” (20...