Audiofrog A600.1D - Manuals

Page 2 - Input 1 sends signal to output chan-; Notes about crossover settings:; When

Controls and Functions (150.4D) : Turn On Mode: Signal: Senses audio signal on the speaker level inputs (>800mVp) and on the line lev- el inputs (>45mVp) to turn on the amplifier. There will be a short delay in turn-off to accommodate silence between tracks. Offset: Senses the 6V BTL reference...

Page 4 - Connect these to the

GND +12V REM Connections: A150.4D GND: Connect to the metal part of the ve - hicle’s body. Scrape away paint to ensure a low resistance connection. Do not tin the wire with solder. +12V: Connect to the + terminal of the vehicle’s battery. You MUST install a fuse holder with a 60A fuse within 18” (45...

Page 5 - Please; Remote Level Control:

Signal Turn-On Mode Offset Rem GND +12V REM Connections: A600.1D GND, +12V, REM: Please see previous page. These connections are the same as for the A150.1D. You MUST install a fuse holder with a 60A fuse within 18” (45cm) of the battery’s + terminal. HIGH LEVEL INPUT, LOW LEVEL INPUT: Please see pr...

Page 6 - No audio signal is; B RG

Remote Level Control (Optional): For one A600.1D and one RLC, plug one end of the RJ11 cord into the RLC and the other end into the amplifier. One RLC can control more than one A600.1D amplifier using a phone jack splitter like the one shown below. Plug one connector into the RLC and plug each of th...

Page 7 - Setup and Adjustments:; range speakers connected to the amplifi

Setup and Adjustments: Crossovers: The primary function of a crossover is to keep small drivers safe. The secondary function of a crossover is to provide an appropriate division of low and high frequencies to ensure an inaudble transition from one speaker to another. In order for a speaker to play h...

Audiofrog A600.1D - Manuals

Manuals:

User Manual Audiofrog A600.1D

Summary