ATTO FC 3321, FC 3322, FC 3342 - Manuals

5 ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual 2 Fibre Channel is a key technology for storage Fibre Channel is a serial communications technology designed to transfer large amounts of data among a variety of hardware systems over long distances. It is a key te...

7 ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual 3 Hardware installation and initial configuration You will need a basic understanding of Fibre Channel before installing the ATTO ExpressPCI host adapter. Please refer to Chapter 2 for a list of Fibre Channel-relat...

8 Install a t ion and configuration ExpressPCI FC 3321 bracket and board FC Controller FC link activity/fault LED optical connectors PCI bus edge connector Port 1, SFF Port 0, SFF ExpressPCI FC 3321 The ATTO ExpressPCI FC 3321 has two SFF duplex LC optical connectors and uses a short wave laser. A m...

9 ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual Exhibit 3-3 ExpressPCI FC 3322 bracket and board Exhibit 3-4 Express PCI FC 3342 bracket and board FC Controller ExpressPCI FC 3322 bracket and board ExpressPCI FC 3342 bracket and board FC Controller FC Controller

10 Install a t ion and configuration Initial configuration While the factory settings on your ExpressPCI host adapter should provide excellent performance for a wide range of applications, some specialized applications may benefit from modification of the adapter settings to tune the adapter for a s...

11 ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual 4 Installing/updating device drivers and firmware ExpressPCI FC host adapters require a device driver and firmware for proper operation. Your adapter firmware was properly flashed before shipment, but the firmware...

12 Device drivers 7 Select ExpressPCI FC and click OK . 8 When the driver is finished loading, reboot the system. Updating the Windows NT driver 1 Click on the Start menu and select Run . 2 Type in RDISK.EXE and press ENTER to create an emergency repair disk. 3 Double-click My Computer and open the ...

13 ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual 5 Troubleshooting This chapter contains solutions for the most common problems you might encounter. If you need additional assistance, please refer to the ATTO Technology web site (www.attotech.com) or contact an ...

14 T r oublesh ooting 5 If ExpressPCI FC does not appear in the Device List , try reloading the driver software as described in Chapter 4 of this manual. 6 If it is started, go back to the Devices tab of the SCSI adapters utility window and double click on the ATTO ExpressPCI host adapter descriptio...

i ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual Appendix A Standards and compliances The equipment described in this manual generates and uses radio frequency energy. The Technical Specification sheet for a particular ATTO ExpressPCI host bus adapter list certif...

ii Appendix B Fibre Channel accessories The following Fibre Channel accessories are available through ATTO Technology and authorized resellers. Contact an ATTO Technology authorized sales representative to order. Copper Cables CBL-HSDB-03X HSSDC to DB9 Copper Fibre Channel Cable – 3m. CBL-HSDB-10X H...

iii ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual Appendix C SCSI host adapter selection guide ATTO Technology offers a number of SCSI and Fibre Channel solutions for storage. The following chart compares the features of ExpressPCI SCSI host adapters. Supported ...

iv Appendix D Contact ATTO Technology, Inc. Customer service, sales information and technical support are available by phone Monday through Friday, Eastern Standard Time 8:00 a.m. to 8:00 p.m., or by e-mail and web site 24-hours a day. ATTO Technology, Inc.155 CrossPoint ParkwayAmherst, New York 140...