Atmel ATAK2270 - Manuals

Getting Started RFID Application Kit ATAK2270 User Manual 2-3 4871E–RFID–04/08 2.2 Software Installation The ATAK2270 host installation software as well as the related datasheets and documentation are pro-vided by the CD-ROM included in the kit. Furthermore, the up-to-date software and documentation...

RFID Application Kit ATAK2270 User Manual 3-1 4871E–RFID–04/08 Section 3 Description of the Application Board System 3.1 System Overview The ATAK2270 application board unit ( Figure 2-3 ) consists of a ready-to-run standard microcontroller main board equipped with the Atmel AVR ® microcontroller ATm...

Description of the Application Board System 3-2 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 3.3.1 Frequency Tuning Mode Selection The reader interface has a built-in frequency tuning feature. By the host software, the resonant fre-quency of the LC antenna circuit can be switched in fo...

Description of the Application Board System 3-4 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 3.3.3 Antenna Interface Parts List U1 U2270 B SO16 U2 LM7808 TO220 3.3.3.1 Diodes D1 BAS21 SOT23 D2 BAS21 SOT23 D3 BAS21 SOT23 D4 BAS21 SOT23 D5 BAS21 SOT23 D6 BAS21 SOT23 D7 BAS21 SOT23 DZ1 BZ...

Description of the Application Board System RFID Application Kit ATAK2270 User Manual 3-5 4871E–RFID–04/08 3.3.3.5 Capacitors CANT1 1.8 nF II 120 to 180 pF/100V COG CANT2 330 (270) pF/100V COG radial CTUNE1 150 pF/100V COG 0805 CTUNE2 330 pF/100V COG 0805 C3 10 µF/16V radial C4 22 µF/16V radial C5 2...

RFID Application Kit ATAK2270 User Manual 4-1 4871E–RFID–04/08 Section 4 Basic Transponder Functionality Getting Started 4.1 System Installation 1. Install the host software according to the instructions in Section 2.2 . 2. Connect the application board unit with the host PC using the RS232 serial c...

RFID Application Kit ATAK2270 User Manual 5-1 4871E–RFID–04/08 Section 5 Host Software Figure 5-1. Start Window of the ATAK2270 Host Software 5.1 Software Structure The software included supports the following Atmel transponder types: „ TK5530/e5530 read-only „ TK5551 read/write „ TK5552/T5552 read/...

Host Software 5-2 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 5.2 Start Window The host software menu bar has five menus: Setup, Option, Application, Exit, and Info. 5.2.1 Setup Select the appropriate transponder in the Setup -> Transponder menu ( Figure 5-2 ). The user interface d...

Host Software RFID Application Kit ATAK2270 User Manual 5-3 4871E–RFID–04/08 Figure 5-4. Tuning Menu Select the submenu RF-Field to switch the antenna’s RF field ON or OFF. The current status is indicated by the yellow LED, RF On, on the interface board. ON is the default value. Clicking Demoboard R...

Host Software 5-4 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 5.2.3.1 Write Bit String The input text box in theWrite Bit String window can be used to enter programming data, which can be sent to any block. The bit string entered can be freely composed; therefore, it is important to c...

Host Software RFID Application Kit ATAK2270 User Manual 5-5 4871E–RFID–04/08 5.2.3.2 Timing Test If specific antennas have to be matched to a transponder IC, the Timing Test feature can be used to determine the appropriate write timing needed for OOK data downlink. The write time ranges for logical ...

Host Software 5-6 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 5.3 Transponder Type Software Interface Description 5.3.1 TK5530/e5530 Read-only Transponder Menu Figure 5-9. TK5530 Read Tab Selecting Transponder >TK5530/e5530 from the Setup menu, opens the the TK5530 user interface. ...

Host Software RFID Application Kit ATAK2270 User Manual 5-9 4871E–RFID–04/08 5.3.3 TK5551 Read/Write Transponder Figure 5-12. TK5551 Read Tab Selecting Transponder >TK5551 from the Setup menu, opens the the TK5530 user interface. Two tabs are available – Read and Write. The Read tab is divided in...

Host Software 5-12 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 Figure 5-15. Extended Mode Main Read Tab Selecting Extended Mode displays the Read tab ( Figure 5-15 ). The Read tab is divided into two areas – Configuration Setup and Read Timings. 5.3.4.3 Configuration Setup „ Bitrate: ...

Host Software RFID Application Kit ATAK2270 User Manual 5-13 4871E–RFID–04/08 „ POR-Delay: In the default setting, the modulation starts after 192 clock cycles (1.5 ms at 125 kHz) are recognized. When actively selecting POR-Delay, the modulation delay measures 8382 clock cycles (67 ms at 125 kHz) „ ...

Host Software 5-14 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 5.3.4.4.2 Traceability Data The Traceability Data button allows direct access to page 1, which contains the 64-bit traceability data as defined by ISO/IEC 15963-1. Refer to section Section 5.4.3 ”Readout Manufacturer (Trac...

Host Software RFID Application Kit ATAK2270 User Manual 5-15 4871E–RFID–04/08 5.3.5 ATA5570 Multifunction Read/Write Transponder with Sensor Input The ATA5570 is derived from the T5557; however, it is enhanced by an additional sensor input. Depend-ing on the connected sensor resistance, the uplink d...

Host Software 5-16 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 5.3.6 ATA5577 Enhanced Read/Write Transponder with AFE-Options When the ATA5577 transponder is selected, it can be operated in either Basic Mode (compatible with the T5557/ATA5567/TK5551) or in Extended Mode for enhanced f...

Host Software RFID Application Kit ATAK2270 User Manual 5-17 4871E–RFID–04/08 The structure of the ATA5577 user interface differs from the other transponder types. In the Setup window, four tabs – Transp. Settings, Write, Read and ISO 11784 – and the Downlink sec-tion allow the configuration, readin...

Host Software 5-18 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 Not released in Basic Mode: „ Terminator: – Basic Mode Sequence Terminator – Extended Mode Sequence Start Marker Terminator „ Initial. Delay: Modulation switch on delay after POR (0 = 192 Tc; 1 = 8192 Tc) „ Inverse Data: D...

Host Software RFID Application Kit ATAK2270 User Manual 5-19 4871E–RFID–04/08 5.3.6.4 Selecting Write tab Figure 5-22. ATA5577 Write Tab In the Extended Mode, the Fast Write check box in the Downlink section is released (This is the only dif-ference to the Write tap in Basic Mode). However the Fast ...

Host Software 5-20 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 5.3.6.5 Selecting Read tab Figure 5-23. ATA5577 Read Tab The Read menu displays the content of the data blocks 1-7. To read data from an unknown transponder, the configuration of the transponder must be first known and ent...

Host Software RFID Application Kit ATAK2270 User Manual 5-23 4871E–RFID–04/08 5.4 Operating Common Transponder Features 5.4.1 Password PWD Mode The transponder can be protected from unauthorized overwriting of memory data using passwords. If the transponder is configured in password mode, each block...

Host Software 5-24 RFID Application Kit ATAK2270 User Manual 4871E–RFID–04/08 5.4.2 Answer On Request AOR Mode The AOR feature is used to address an individual transponder, among others in a common field. For AOR mode to function, transponders must be also be configured for password mode. Each trans...

Host Software RFID Application Kit ATAK2270 User Manual 5-25 4871E–RFID–04/08 5.4.3 Readout Manufacturer (Traceability) Data The Traceability Data button allows direct access to block 1 an 2 of page 1 which contain the 64-bit traceability data programmed and locked by Atmel during producti on. The d...

4871E–RFID–04/08 /xM © 2008 Atmel Corporation. All rights reserved. Atmel ® , logo and combinations thereof, AVR ® , and others, are registered trademarks or trade- marks of Atmel Cor poration or its subsidiaries. Windows ® and others are registered trademarks or trademarks of Microsoft Cor poration...