Atmel AT89C5132 - Manuals - manualsarea.com

Page 2 - Block Diagram

2 4173ES–USB–09/07 AT89C5132 3. Block Diagram Figure 3-1. AT89C5132 Block Diagram Notes: 1. Alternate function of Port 32. Alternate function of Port 43. Alternate function of Port 1 8-BIT INTERNAL BUS Clock and PLL Unit C51 (X2 CORE) RAM 2304 Bytes Flash Interrupt Handler Unit FILT X2 X1 MMC Interf...

Page 3 - Pin Description

3 4173ES–USB–09/07 AT89C5132 4. Pin Description Figure 4-1. AT89C5132 80-pin TQFP Package P0 .3 /A D 3 P0 .4 /A D 4 P0 .5 /A D 5 VS S VD D P0 .6 /A D 6 P0 .7 /A D 7 P2 .0 /A 8 P2 .1 /A 9 P3. 1 /T XD P 3 .2/IN T 0 P 3 .3/IN T 1 P3. 4 /T 0 P 3 .0 /RX D 1 2 3 4 5 6 7 8 13 11 10 P2.2/A10 P2.3/A11 P2.4/A...

Page 4 - Signals

4 4173ES–USB–09/07 AT89C5132 Figure 4-2. AT89C5132 84-pin PLCC (1) Note: 1. For development board only. 4.1 Signals All the AT89C5132 signals are detailed by functionality in Table 1 to Table 14.Table 1. Ports Signal Description PLCC84 P0. 3 /A D 3 P0. 4 /A D 4 P0. 5 /A D 5 VS S VD D P0. 6 /A D 6 P0...

Page 9 - Table 14. Power Signal Description

9 4173ES–USB–09/07 AT89C5132 Table 14. Power Signal Description Signal Name Type Description Alternate Function VDD PWR Digital Supply Voltage Connect these pins to +3V supply voltage. - VSS GND Circuit Ground Connect these pins to ground. - AVDD PWR Analog Supply Voltage Connect this pin to +3V sup...

Page 10 - Internal Pin Structure; Table 15. Detailed Internal Pin Structure; When the Two Wire controller is enabled, P

10 4173ES–USB–09/07 AT89C5132 4.2 Internal Pin Structure Table 15. Detailed Internal Pin Structure Notes: 1. For information on resistors value, input/output levels, and drive capability, refer to the Section “DC Characteristics”, page 183. 2. When the Two Wire controller is enabled, P 1 , P 2 , and...

Page 11 - Address Spaces; Code Memory; Boot Memory

11 4173ES–USB–09/07 AT89C5132 5. Address Spaces The AT8xC5132 derivatives implement four different address spaces: • Program/Code Memory • Boot Memory • Data Memory • Special Function Registers (SFRs) 5.0.1 Code Memory The AT89C5132 implements 64K Bytes of on-chip program/code memory in Flash techno...

Page 12 - Peripherals; Clock Generator System; S formats and the on-chip PLL allows connection of almost all

12 AT89C5132 4173ES–USB–09/07 Peripherals The AT8xC5132 peripherals are briefly described in the following sections. For further details on how to interface (hardware and software) to these peripherals, please refer to the AT8xC5132 complete datasheet. Clock Generator System The AT8xC5132 internal c...

Page 14 - Electrical Characteristics; Absolute Maximum Ratings; Digital Logic; Voltage on any other Pin to; Table 1. Digital DC Characteristics

14 4173ES–USB–09/07 AT89C5132 6. Electrical Characteristics 6.1 Absolute Maximum Ratings 6.2 DC Characteristics 6.2.1 Digital Logic Storage Temperature ..................................... -65 ° C to +150 ° C Voltage on any other Pin to V SS ..................................... -0.3 to +4.0V I OL ...

Page 15 - Typical values are obtained using V; C. They are not tested and there is no; See Table 154 for typical consumption in player mode.; and I; Test Conditions; Test Condition, Active Mode

15 4173ES–USB–09/07 AT89C5132 Notes: 1. Typical values are obtained using V DD = 3 V and T A = 25 ° C. They are not tested and there is no guarantee on these values. 2. Flash retention is guaranteed with the same formula for V DD min down to 0V. 3. See Table 154 for typical consumption in player mod...

Page 16 - Test Condition, Idle Mode

16 4173ES–USB–09/07 AT89C5132 Figure 6-2. I DL Test Condition, Idle Mode Figure 6-3. I PD Test Condition, Power-Down Mode 6.2.3 A-to-D Converter Table 2. A-to-D Converter DC Characteristics V DD = 2.7 to 3.3V , T A = -40 to +85 ° C X2 VDD Clock Signal RST VSS TST X1 P0 (NC) I DL All other pins are u...

Page 17 - Oscillator and Crystal; Table 3. Oscillator and Crystal Characteristics; Phase Lock Loop; Schematic

17 4173ES–USB–09/07 AT89C5132 6.2.4 Oscillator and Crystal 6.2.4.1 Schematic Figure 6-4. Crystal Connection Note: For operation with most standard crystals, no external components are needed on X1 and X2. It may be necessary to add external capacitors on X1 and X2 to ground in special cases (max 10 ...

Page 18 - Parameters; Table 4. PLL Filter Characteristics; USB Connection; Table 16. USB Characteristics; In-system Programming

18 4173ES–USB–09/07 AT89C5132 6.2.5.2 Parameters Table 4. PLL Filter Characteristics V DD = 2.7 to 3.3V , T A = -40 to +85 ° C 6.2.6 USB Connection 6.2.6.1 Schematic Figure 6-6. USB Connection 6.2.6.2 Parameters Table 16. USB Characteristics V DD = 3 to 3.3 V, T A = -40 to +85 ° C 6.2.7 In-system Pr...

Page 19 - AC Characteristics; External 8-bit Bus Cycles; Definition of Symbols; Table 6. External 8-bit Bus Cycles Timing Symbol Definitions; Timings; Table 7. External 8-bit Bus Cycle – Data Read AC Timings

19 4173ES–USB–09/07 AT89C5132 6.3 AC Characteristics 6.3.1 External 8-bit Bus Cycles 6.3.1.1 Definition of Symbols Table 6. External 8-bit Bus Cycles Timing Symbol Definitions 6.3.1.2 Timings Test conditions: capacitive load on all pins = 50 pF. Table 7. External 8-bit Bus Cycle – Data Read AC Timin...

Page 20 - Table 8. External 8-bit Bus Cycle – Data Write AC Timings; Waveforms

20 4173ES–USB–09/07 AT89C5132 Table 8. External 8-bit Bus Cycle – Data Write AC Timings V DD = 2.7 to 3.3V, T A = -40 ° to +85 ° C 6.3.1.3 Waveforms Figure 6-8. External 8-bit Bus Cycle – Data Read Waveforms Symbol Parameter Variable Clock Standard Mode Variable Clock X2 Mode Unit Min Max Min Max T ...

Page 21 - External 8-bit Bus Cycle – Data Write Waveforms; External IDE 16-bit Bus Cycles; Table 9. External IDE 16-bit Bus Cycles Timing Symbol Definitions

21 4173ES–USB–09/07 AT89C5132 Figure 6-9. External 8-bit Bus Cycle – Data Write Waveforms 6.3.2 External IDE 16-bit Bus Cycles 6.3.2.1 Definition of Symbols Table 9. External IDE 16-bit Bus Cycles Timing Symbol Definitions 6.3.2.2 Timings Test conditions: capacitive load on all pins = 50 pF. T WHLH ...

Page 22 - Table 10. External IDE 16-bit Bus Cycle – Data Read AC Timings; Table 11. External IDE 16-bit Bus Cycle – Data Write AC Timings

22 4173ES–USB–09/07 AT89C5132 Table 10. External IDE 16-bit Bus Cycle – Data Read AC Timings V DD = 2.7 to 3.3V, T A = -40 ° to +85 ° C Table 11. External IDE 16-bit Bus Cycle – Data Write AC Timings V DD = 2.7 to 3.3V, T A = -40 ° to +85 ° C Symbol Parameter Variable Clock Standard Mode Variable Cl...

Page 23 - Figure 6-10. External IDE 16-bit Bus Cycle – Data Read Waveforms; External IDE 16-bit Bus Cycle – Data Write Waveforms; SPI Interface; Table 12. SPI Interface Timing Symbol Definitions

23 4173ES–USB–09/07 AT89C5132 6.3.2.3 Waveforms Figure 6-10. External IDE 16-bit Bus Cycle – Data Read Waveforms Note: D15:8 is written in DAT16H SFR. Figure 6-11. External IDE 16-bit Bus Cycle – Data Write Waveforms Note: D15:8 is the content of DAT16H SFR. 6.3.3 SPI Interface 6.3.3.1 Definition of...

Page 24 - Table 13. SPI Interface Master AC Timing

24 4173ES–USB–09/07 AT89C5132 6.3.3.2 Timings Table 13. SPI Interface Master AC Timing V DD = 2.7 to 3.3V, T A = -40 ° to +85 ° C Notes: 1. Value of this parameter depends on software.2. Test conditions: capacitive load on all pins = 100 pF Symbol Parameter Min Max Unit Slave Mode T CHCH Clock Perio...

Page 26 - Table 17. TWI Interface AC Timing

26 4173ES–USB–09/07 AT89C5132 Figure 6-14. SPI Master Waveforms (SSCPHA = 0) Note: 1. SS handled by software using general purpose port pin. Figure 6-15. SPI Master Waveforms (SSCPHA = 1) Note: 1. SS handled by software using general purpose port pin. 6.3.4 Two-wire Interface 6.3.4.1 Timings Table 1...

Page 27 - Spikes on the SDA and SCL lines with a duration of less than 3·T; mum capacitance on bus-lines SDA and

27 4173ES–USB–09/07 AT89C5132 V DD = 2.7 to 3.3 V, T A = -40 to +85 ° C Notes: 1. At 100 kbit/s. At other bit-rates this value is inversely proportional to the bit-rate of 100 kbit/s.2. Determined by the external bus-line capacitance and the external bus-line pull-up resistor, this must be < 1 μ ...

Page 28 - MMC Interface; Table 14. MMC Interface Timing Symbol Definitions; Table 15. MMC Interface AC Timings

28 4173ES–USB–09/07 AT89C5132 6.3.5 MMC Interface 6.3.5.1 Definition of Symbols Table 14. MMC Interface Timing Symbol Definitions 6.3.5.2 Timings Table 15. MMC Interface AC Timings V DD = 2.7 to 3.3 V, T A = -40 to +85 ° C, CL ≤ 100pF (10 cards) 6.3.5.3 Waveforms Figure 6-17. MMC Input Output Wavefo...

Page 29 - Audio Interface; Table 16. Audio Interface Timing Symbol Definitions; Table 17. Audio Interface AC timings

29 4173ES–USB–09/07 AT89C5132 6.3.6 Audio Interface 6.3.6.1 Definition of Symbols Table 16. Audio Interface Timing Symbol Definitions 6.3.6.2 Timings Table 17. Audio Interface AC timings V DD = 2.7 to 3.3V, T A = -40 to +85 ° C, CL ≤ 30pF Note: 32-bit format with Fs = 48 kHz. 6.3.6.3 Waveforms Figur...

Page 30 - Analog to Digital Converter; Table 18. Analog to Digital Converter Timing Symbol Definitions; Characteristics; Table 18. Analog to Digital Converter AC Characteristics

30 4173ES–USB–09/07 AT89C5132 6.3.7 Analog to Digital Converter 6.3.7.1 Definition of Symbols Table 18. Analog to Digital Converter Timing Symbol Definitions 6.3.7.2 Characteristics Table 18. Analog to Digital Converter AC Characteristics V DD = 2.7 to 3.3 V, T A = -40 to +85 ° C Notes: 1. AV DD = A...

Page 33 - Table 22. External Clock AC Timings; During AC testing, all inputs are driven at

33 4173ES–USB–09/07 AT89C5132 6.3.9.2 Timings Table 22. External Clock AC Timings V DD = 2.7 to 3.3V, T A = -40 to +85 ° C 6.3.9.3 Waveforms Figure 6-23. External Clock Waveform Figure 6-24. AC Testing Input/Output Waveforms Notes: 1. During AC testing, all inputs are driven at V DD -0.5V for a logi...

Page 34 - Ordering Information; PLCC84 package only available for development board.; Possible Order Entries

34 4173ES–USB–09/07 AT89C5132 7. Ordering Information Note: 1. PLCC84 package only available for development board. Possible Order Entries (1) Part Number Memory Size (Bytes) Supply Voltage Temperature Range Max Frequency (MHz) Package Packing Product Marking AT89C5132-ROTIL 64K Flash 3V Industrial ...

Page 35 - Package Information

35 4173ES–USB–09/07 AT89C5132 8. Package Information 8.1 TQFP80

Page 38 - A tmel Co rp or ati on

Printed on recycled paper. 4173ES–USB–09/07 © 2007 Atm el Corporation. A ll rights reserved. Atmel ® , logo and combinations thereo f, and Everywhe re You Are ® are the trademarks or regis- tered trademarks, of Atmel Co rporation or its subsid iaries. Other terms and product na mes may be trademarks...