Atlona AT-HDMI40SR - Manuals

Page 2 - Safety and Notice; The; AT-HDMI40SR HDMI Extender over 1 CAT5e Cable; has been tested

Safety and Notice The AT-HDMI40SR HDMI Extender over 1 CAT5e Cable has been tested for conformity to safety regulations and requirements in the US, and has been certified for international use. However, like all electronic equipment, the AT-HDMI40SR should be used with care. Please read and follow t...

Page 3 - and audio at greater distances.

Introduction Features The AT-HDMI40SR boosts up your video/audio transmission distance up to 60m/200ft in HDTV 1080i format. With only one cost effective CAT-5/5e cable, users can readily extend HDTV sources from DVD players, PS3, PC, or any other kind of HDCP compliant source, to any remote display...

Page 4 - x 5V 2A power adapter

3 Package Contents Technical Specifications • 1x HDMI transmitting unit (AT-HDMI40S) • 1x HDMI receiving unit (AT-HDMI40R) • 2x 5V 2A power adapter • 1x User Manual • Video Bandwidth: 1.65Gbps (HDMI 1.2a) • Input TMDS signal: 1.2 volts (peak-to-peak) • Input DDC signal: 5 volts (peak-to-peak) • HDMI...

Page 5 - Panel Descriptions; Connect a HDMI source with a HDMI M-M cable here; Front View - Transmitting Unit AT-HDMI40S; Mode

3 4 Panel Descriptions HDMI IN: Connect a HDMI source with a HDMI M-M cable here Rotary switch: 0: HDMI mode with 8 audio channels 1: HDMI mode with S/PDIF 2 audio channels 2: DVI mode 3-5: Reserved 6: Use default EDID 7: Learn EDID from the receiver TMDS: Plug in a CAT5/5e/6 cable that needs to be ...

Page 6 - Rear View –Receiving Unit AT-HDMI40R

5 HDMI IN: Connect a HDMI display with a HDMI M-M cable here. Rotary switch: Adjust the equalization strength to the received TMDS signals. 0-7= strongest – weakest. TMDS: Plug in a CAT5/5e/6 cable that needs to be linked to the TMDS connector of the transmitting Unit : AT-HDMI40S. 5V DC: Connect to...

Page 7 - Hardware Installation; the weakest. Try adjusting the EQ from 7 to 0.; Notice

5 6 Hardware Installation 1. Connect your HDMI/DVI source (such as a DVD player) to the transmit - ting unit AT-HDMI40S.2. Connect your HDMI/DVI display (such as a plasma TV) to the receiving unit AT-HDMI40R.3. Connect your CAT-5/5e/6 cable between the transmitting and receiving units.4. Make sure y...

Page 8 - Note for EDID (Extended Display Identification Data) learning; Please connect the display which you want to read EDID with a HDMI; clockwise from

7 Note for EDID (Extended Display Identification Data) learning 1. Please connect the display which you want to read EDID with a HDMI cable to the transmitter’s HDMI-IN and turn Mode to 7 so the Transmitter can learn the EDID information from the connected HDTV. The LED on the RJ45-OUT of Transmitte...

Page 9 - SAFETY INFORMATION; Safeguards; be easily accessible in case it requires; Precautions; Use only accessories recommended by

7 8 SAFETY INFORMATION Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. Do not modify the wall plug. Doing so will void the warranty and sa...

Page 10 - WARRANTY; ATLONA

9 WARRANTY 1. LIMITED WARRANTY Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the accompanying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from defects in materials and work...