ATEN KVM CS-62 - Manuals - manualsarea.com

Page 3 - Overview

Overview The CS-62 Petite KVM Switch Switch is a control unit thatallows access to two computer systems from a single console(keyboard, monitor, and mouse). Before the development of theCS-62, the only way to control multiple computer configurationsfrom a single console was through a complex and cos...

Page 4 - Features

Features M One console controls two computers M Compact design features two molded-in KVM (keyboard,video, mouse) cables M Supports Microsoft IntelliMouse and the scrolling wheel onmost mice M Easy to install - No software required - connecting cables tothe computers is all it takes M Easy to operat...

Page 5 - Hardware Requirements; Console; Note: The keyboard and mouse cables have PS/2 style

Hardware Requirements Console M A VGA, SVGA, or Multisync monitor capable of the highestresolution that you will be using on any computer in theinstallation M A PS/2 Mouse M A PS/2 Keyboard Computers The following equipment must be installed on each computerthat is to be connected to the system: M A...

Page 6 - Front View

Front View 1. Port LEDs A LED lights to indicate its corresponding port is the one thathas the KVM focus. Depending on the port’s status, the LEDmay flash according to a specific pattern (see the LEDDisplay Table, p. 8, for details). 2. KVM Cables These 3-in-1 cables connect to the keyboard, video, ...

Page 7 - Installation; Note: The CS-62’s Power On default is to link to the first

Installation Refer to the Installation diagram on the next page as youperform the following steps: 1. Plug your keyboard, monitor, and mouse into the appropriate Console ports of the CS-62. Each port is labeled with anappropriate icon to indicate itself. 2. Plug the keyboard, monitor, and mouse conn...

Page 9 - Operation; Selecting the Active Port; Note: While Auto Scan Mode is in effect, ordinary keyboard

Operation The CS-62 Petite KVM Switch uses hotkey combinations toprovide KVM focus to the computers. The hotkey combinationsallow you to: M Select the Active Port M Invoke Auto Scan Mode M Set the Auto Scan Time Interval Selecting the Active Port You can toggle the KVM focus between the two computer...

Page 10 - Changing the Scan Interval; Note: Press and release the keys one at a time.; LED Display Table

Changing the Scan Interval Before you invoke Auto Scan, you can change the amount oftime that Auto Scan dwells on each port (the time interval), withthe following hotkey combination: [Left shift] [Right shift] [S] [ n ] Where n represents a number from 1 to 4 that specifies thedesired scan interval ...

Page 11 - Specifications

Specifications Function Specification Computer Connections 2 Port Selection Hot Keys LEDs Selected 2 Connectors Keyboard 1 x 6 pin mini-DIN female (PS/2 style) - Console2 x 6 pin mini-DIN male (PS/2 style) - CPU Ports Mouse 1 x 6 pin mini-DIN female (PS/2 style) - Console2 x 6 pin mini-DIN male (PS/...

Page 12 - Troubleshooting

Troubleshooting Symptom Possible Cause Action Keyboard NotResponding 1 Loose cables. Check all keyboard cable connectionsto make sure they are completelyseated in their sockets. Keyboard needs to bereset. Unplug the keyboard from the ConsoleKeyboard Port, then plug it back in. Switch needs to berese...

Page 14 - Limited Warranty

Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEEDTHE PRICE PAID FOR THE PRODUCT FROM THE DIRECT,INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIALDAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISKOR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expresse...