ATEN CS-64U - Manuals

ATEN CS-64U – Manual in PDF format online.

Manuals:

Manual

Manual ATEN CS-64U

Summary

Page 2 - Reorient or relocate the receiving antenna

Note: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses andcan radiat...

Page 3 - Overview

Overview The CS-64U Petite USB KVM Switch is a control unit thatallows access to four computer systems from a single console(keyboard, monitor, mouse and audio). Before the developmentof the CS-64U, the only way to control multiple computerconfigurations from a single console was through a complexan...

Page 4 - Features

Features M One console (VGA, SVGA or Multisync monitor, a USBkeyboard, and a USB mouse) controls up to four computers M Compact and small footprint design features four molded-inKVM (Keyboard, Video, Mouse and audio) cables M Easy to install: no software required - connecting cables tothe computers ...

Page 5 - Hardware Requirements; Console; A USB Keyboard; Computers; A VGA, SVGA or Multisync port; Cables; System Requirements; USB Host Controller installed on the system.

Hardware Requirements Console M A VGA, SVGA, or Multisync monitor capable of the highestresolution that you will be using on any computer in theinstallation M A USB Keyboard M A USB Mouse Computers The following equipment must be installed on each computerthat is to be connected to the system: M A V...

Page 6 - Top View; The cable from your speakers plug in here.

Top View 1. KVM Cables These 3-in-1 cables connect to the USB, video, and audioports on the computers you are installing.The cable with a single dot at its base is the Port 1 cable; thecable with two dots at its base is the Port 2 cable, etc. 2. Port LEDs A LED lights to indicate its corresponding p...

Page 7 - Installation; Plug your keyboard, monitor and mouse into their ports on; Note: When using a wireless composite keyboard and; computer you turn on.

Installation Refer to the installation diagram on the next page as youperform the following: 1. Plug your keyboard, monitor and mouse into their ports on the CS-64U. The keyboard and mouse ports are labeled withan icon to distinguish them. Note: When using a wireless composite keyboard and mouse, it...

Page 9 - Hotkey Operation; Port Switching; Note: If using the Scroll Lock key conflicts with other programs; Cycling Through the Ports

Hotkey Operation The CS-64U provides an extensive, easy-to-use, hotkeyfunction that makes it convenient to control and configure yourKVM installation from the keyboard. Hotkeys provideasynchronous (independent) switching of the KVM console andthe audio focus. If you wish, you can give one computer t...

Page 10 - Going Directly to a Port

Going Directly to a Port Hotkey Action [Scroll Lock] [Scroll Lock][n] [Enter] Brings the KVM and the audio focus tothe computer attached to the portcorresponding to the specified Port ID. Note that the KVM and audio focus bothgo to this port even if they were ondifferent ports to begin with. [Scroll...

Page 11 - Auto Scanning; Note: 1. The n stands for the number of seconds that the; While Auto Scan Mode is in effect, ordinary keyboard

Auto Scanning The CS-64U’s Auto Scan feature automatically cycles the KVMfocus through the computer ports at regular intervals. Thisallows you to monitor the computer activity without having totake the trouble of switching from port to port manually. See thetable below for details. Hotkey Action [Sc...

Page 12 - Hotkey Setting Mode; Note: The minus key must be released within one half second,; Alternate HSM Invocation Keys; Note: This procedure is a toggle between the two methods. To

Hotkey Setting Mode Hotkey Setting Mode is used to set up your CS-64U switchconfiguration. All operations begin with invoking Hotkey SettingMode (HSM). Invoking HSM To invoke HSM do the following: 1. Press and hold down the Num Lock key 2. Press and release the minus key 3. Release the Num Lock key ...

Page 13 - Alternate Port Switching Keys; Press and release the T key; Keyboard Operating Platform; Bring the KVM focus to the port you want to set.; * The first time that the Sun system runs from a port, you must

Alternate Port Switching Keys The port switching activation keys can be changed from tappingthe Scroll Lock key twice ([Scroll Lock] [Scroll Lock]) to tappingthe Ctrl key twice. To change the port switching activation keys,do the following: 1. Invoke HSM (see p. 10) 2. Press and release the T key No...

Page 14 - Note: This procedure is a toggle. To enable the Port Switching

List Hotkey Settings To see a listing of the current hotkey settings, do the following: 1. Invoke HSM (see p. 10). 2. Press and release the F4 function key. 3. Open a text editor or word processor and use its Paste function to display the settings. USB Reset If the USB loses focus and needs to be re...

Page 15 - Restore Default Settings; All hotkey settings return to the factory default settings.; HSM Summary Table

Restore Default Settings To reset the CS-64U to its default hotkey settings, do thefollowing: 1. Invoke HSM (see p. 10). 2. Press [R] [Enter]. All hotkey settings return to the factory default settings. HSM Summary Table After invoking HSM (see p. 10), key in one of the following keysto perform the ...

Page 16 - Keyboard Emulation Mappings; Sun Keyboard; Ctrl key, then press and release the activation key.

Keyboard Emulation Mappings Sun Keyboard The PC compatible (101/104 key) keyboard can emulate thefunctions of the Sun keyboard when the Control key [Ctrl] isused in conjunction with other keys. The correspondingfunctions are shown in the table below. Note: When using [Ctrl] combinatons, press and re...

Page 17 - Mac Keyboard; Note: When using key combinatons, press and release the first; key, then press and release the second one.

Mac Keyboard The PC compatible (101/104 key) keyboard can emulate thefunctions of the Mac keyboard. The emulation mappings arelisted in the table below. Note: When using key combinatons, press and release the first key, then press and release the second one. PC Keyboard Mac Keyboard [Shift] Shift [C...

Page 18 - Appendix; Specifications

Appendix Specifications Function Specification CPU Ports 4 Port Selection Hotkeys CPUConnectors USB 4 x Type-A (M) VGA 4 x HDB-15 (M) Speaker 4 x Audio Jack (M) ConsoleConnectors Keyboard 1 x Type-A (F) Mouse 1 x Type-A (F) VGA 1 x HDB-15 (F) Speaker 1 x Audio Jack (F) LEDs 4 x Green Keyboard / Mous...

Page 19 - Troubleshooting

Troubleshooting Symptom Cause Action Keyboard 1 and/orMouse 2 Not Responding Loose cables. Check all cable connections tomake sure they are completelyseated in their sockets. Switch is in AutoScan Mode. Press either Port Selection switchor the Spacebar to exit Auto ScanMode. Keyboard / Mouseneeds to...

Page 20 - LED Display Table; Limited Warranty

LED Display Table Activity Indication Off Port is not selected. On (Steady) Port is connected to an active computer. Flashing (On and Offequal) Port is connected to an active computerand is being accessed in Auto Scan Mode. Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED THE ...