ATEN CS-102 - Manuals - manualsarea.com

Page 2 - Introduction; Features; Simple Keystrokes or Pushbutton for PC Selection.

Introduction The CS-102 or CS-122 CPU Switch is a controller for one user to access multiple computers. Before the development of theMaster View, the only way to control multiple computer configurations from a single console was through a complex andcostly network system. Now, with a Master View CPU...

Page 3 - Specifications

CS-122 Side View Specifications Function Specification Power Consumption DC 9V 160mA (max.) PC Connections 2 PC Selected By Keyboard/Button LEDs 1 Power 2 Ready 2 Select Scan Interval 3, 10, 20, 40 Sec. Keyboard Connector 5-pin DIN + , 6-pin mini-DIN * Mouse Connector 9-pin D Type Male/Female PS/2 M...

Page 4 - Installation; One Stage Installation; Set DIP switch 4 to; ON; Use either port per computer.

Installation Installation is fast and easy; plugging cables into their appropriate ports is all that is entailed. A Master View CS-102/CS-122 unit can control two PCs. To control even more computers, units can be cascaded to three levels, with each other, anddown from CS-104s and CS-106s. One Stage ...

Page 5 - Two Stage Installation; Use either keyboard port per computer.

Two Stage Installation Adding a second stage enables one CPU Switch (the first stage CS-104 or CS-106) to control computers directly orindirectly via cascaded CPU Switches (the second stage CS-102, CS-104 or CS-106). The number of PCs under control isdetermined by the configuration. Fig. B 1. Set DI...

Page 6 - Three Stage Installation

Three Stage Installation Adding a third stage enables one CPU Switch (the first stage CS-104 or CS-106) to control computers directly or indirectlyvia cascaded CPU Switches (the second and third stage CS-102, CS-104 or CS-106). The number of PCs under control isdetermined by the configuration. Fig. ...

Page 7 - Operation; Front Panel Button Selection; SELECT BUTTON; Hot Key Selection; Alt; Space

Operation There are two ways to access any computer on the installation: by pressing the front panel SELECT BUTTON , or by entering Hot Keys from the keyboard. Once a computer has been accessed, the CPU Switch directs keyboard control, mouse control, and video image of that computer to you as if the...

Page 9 - Appendix; LEDs; Power; DIP Switch Setting; Off

Appendix LEDs The CS-102/CS-122 contains one Power LED, two Ready LEDs, and two Port Select LEDs on its front panel. Their indications are as follows: Power LED: Lights when the CPU Switch is running. Ready LED: Lights when the connected PC or CPU Switch is running. Port Select LED: Lights to indica...

Page 10 - Troubleshooting; Preventing Radio & TV Interference

Troubleshooting Symptom Cause Action 1st stage CS-102/CS-122 does nottake Hot Keys. Incorrect DIP Switch settings. Set the First Stage CS-102/CS-122 DIP Switch 4 to ON ; for all other (cascaded) CS-102 units, set DIP Switch 4 to OFF . Pressing Hot Keys gets noresponse. CS-102/CS-122 is in Scan Mode ...