Asus Z71 - Manuals - manualsarea.com

Page 2 - upgrade & replacement; HDD Installation & Replacement; Installing HDD; Turn the notebook over and remove battery pack first.

upgrade & replacement Z71 5 - 2 HDD Installation & Replacement The Z71 Series Notebook uses an industry-standard 2½” HDD with IDE interface. You can install the HDD to any capacity of your choice within our approval and prior test. Installing HDD 1. Turn the notebook over and remove battery ...

Page 3 - Replace a new HDD into the HDD Housing and secure 4 screws

upgrade & replacement Z71 5 - 3 4. Replace a new HDD into the HDD Housing and secure 4 screws 5. Connect the HDD connector (mind that a direction of the connector by the empty pin position).

Page 4 - Affix the HDD cover and secure 2 screws.

upgrade & replacement Z71 5 - 4 6. Insert the hard disk module and connect the FPC and lay it down until it’s installed properly and secure 1 secrew (M2*6L(K)). 7. Affix the HDD cover and secure 2 screws. M2*6L

Page 5 - Memory Installation & Replacement; Installing & Replacing memory; the module up to a 30

upgrade & replacement Z71 5 - 5 Memory Installation & Replacement The Z71 Series Notebook comes standard with 2 DDR sockets onboard. You can upgrade the total memory up to 1GB with two 512MB module. Installing & Replacing memory 1. Remove 9 screws (M2*6L(K)from back cover and remove it. ...

Page 6 - Removing 2; Memory module; move it forward and lay it down.; Keyboard

upgrade & replacement Z71 5 - 6 Removing 2 nd Memory module 1. Remove 2 screws (M2*5L(K) at bottom case. 2. Release 3 keyboard latches with a pair of tweezers as shown below. Then move it forward and lay it down. 3. Remove memory module by opening the latches, which will pop the module up to a 3...

Page 7 - Insert memory at a 30

upgrade & replacement Z71 5 - 7 4. Insert memory at a 30 ° angles and press down until it clicks into the latches then put the memory cover. 5. Secure 9 screws (M2*5L(K) to fix the memory cover . M2*6L

Page 8 - CPU Installation & Replacement; then take away the Fan Module.

upgrade & replacement Z71 5 - 8 CPU Installation & Replacement 1. Remove 9 screws (M2*6L(K)from back cover and remove it. 2. Remove 2 screws (M2*6L(K)) aside the CPU fan and disconnect FAN connector then take away the Fan Module. 3. Remove the 4 screws(M2*6L(K)) by order upon the thermal mod...

Page 9 - CPU and take the CPU away.

upgrade & replacement Z71 5 - 9 4. Turn the non-removable scrw here 180 degrees counter-clockwise to loosen the CPU and take the CPU away. Note: If thermal module has no thermal pad on it, please plus a thermal pad on the CPU die before assembling. Note: Z71 is adjustable for Dothan CPU or Dotha...

Page 10 - screw here 180 degrees clockwise to lock the CPU.

upgrade & replacement Z71 5 - 10 5. Use the CPU vacuum to “suck up” the CPU then and turn the non-removable screw here 180 degrees clockwise to lock the CPU. 6. Install the CPU heat sink module gently and secure 4 screws (M2*6L(K)) by order upon the CPU module . 7. Put on the fan bracket and sec...

Page 12 - WLAN Module Installation & Replacement; Remove 2 Antenna cables from Wireless LAN Module

upgrade & replacement Z71 5 - 12 WLAN Module Installation & Replacement 1. Remove 9 screws (M2*6L(K) from back cover and remove it. 2. Remove 2 Antenna cables from Wireless LAN Module 3. Remove the Wireless LAN module by opening the 2 latches aside, which will pop the module up to an angle o...