Page 2 - Disassembly Procedure; Battery Module; The illustration below shows how to remove the battery module.; HDD Module; Removing HDD Module; disk module
Disassembly Procedure 2 - 2 Battery Module The illustration below shows how to remove the battery module. 1. Press latch to open the battery module, then lift battery module away from the system. HDD Module The illustrations below show how to remove the HDD module from the notebook. Removing HDD Mod...
Page 3 - Memory Module; Removing Memory module; angles, and then pulling out the module in that angle.
Disassembly Procedure 2 - 3 Memory Module The W5F Series Notebook have onboard RAM. There is one SO-DIMM sockets for installing SO-DIMM RAM. It can upgrade the total memory size up to 1GB with a 512MB module on each socket. Removing Memory module 1. Remove 2 screws (M2*4L(K)), then remove the Memory...
Page 4 - CPU Module; Removing CPU Module; away the Fan Module.
Disassembly Procedure 2 - 4 CPU Module The illustrations below show how to remove the CPU module from the notebook. Removing CPU Module 1. Remove 3 screws (M2*4L(K)), then remove the back cover. 2. Remove 4 screws (M2*4L(K)) and disconnect the FAN connector and then take away the Fan Module. 3. Turn...
Page 5 - Optical Drive Module; Remove 3 screws and use; Keyboard Module; The illustration of below shows how to remove the keyboard; Removing Keyboard Cover; on the front side then disconnect the FPC.
Disassembly Procedure 2 - 5 Optical Drive Module Remove 3 screws and use tweezers to put the Optical Drive Module out. Keyboard Module The illustration of below shows how to remove the keyboard Removing Keyboard Cover 1. Unlock 3 keyboard latches then pull out the keyboard forward and lay the keyboa...
Page 6 - Top Case Module; Removing Top Case Module
Disassembly Procedure 2 - 6 Top Case Module Removing Top Case Module 1. Disconnect all FPC and 2 screws on the top case. 2. Take away the both hinge cover. 3. Remove 17 screws (M2*6L(K)) on bottom case. M2*6L T O P C A S E M O D U L E R E M O V A L
Page 10 - LCD Module; Removing LCD Module; cover and take LCD front bezel away.
Disassembly Procedure 2 - 10 LCD Module The illustrations below show how to remove and disassemble the LCD module. The module contains LCD panel, Inverter board, LCD Hinge bracket, Hinge cover, LCD front cover, LCD back cover Removing LCD Module 1. Remove 6 rubber pads and 6 screws (M2.5 x 4L) from ...
Page 11 - ilft side to disassemble LCD brackets.
Disassembly Procedure 2 - 11 4. Remove 4 crews(M2.5*4L(K)) and take away the LCD module . 5. Remove 2 screws(M2*4L(K)) on the right LCD bracket , and 2 screws on the ilft side to disassemble LCD brackets. 6. Remove 2 tapes and dissconnect coaxial cable then take it away. 7. Remove 4 screws(M2*4L(K))...
Page 12 - Remove the speaker cable and take the Microphone board off.
Disassembly Procedure 2 - 12 8. Remove 2 screws (M2*3L(K)) and cable. 9. Remove the speaker cable and take the Microphone board off. 10. Remove 1 screw (M2*3L(K)) and disconnect the FPC then take the CMOS camera board off. 11. Take away the camera cover. M2*3L M2*3L
Page 13 - Motherboard module; Removing Motherboard Module
Disassembly Procedure 2 - 13 12. Remove 2 screws (M2*3L(K)) and disconnect the FPC then take the bracket. 10. Take away the CMOUS camera. Motherboard module The illustrations below show how to disassemble and remove the Motherboard module Removing Motherboard Module 1. Remove 1 screw (M2*3L(K)) on t...
Page 15 - Wireless module; Removing Wireless Module
Disassembly Procedure 2 - 15 5. Disconnect the ODO Jack FPC. Wireless module The illustrations below show how to disassemble and remove the Wireless module Removing Wireless Module 1. Remove the Wireless LAN module by opening the 2 latches aside, and pull out the module. 2. Remove 1 screw (M2*3L (K)...