Asus TS100-E4 PI2- Manuals
Asus TS100-E4 PI2– User Manual, Manual in PDF format online.
Manuals:
User Manual Asus TS100-E4 PI2
Summary
給使用者的說明 本產品的所有部分,包括配件與軟體等,其所有權歸華碩電腦公司(以 下簡稱華碩)所有,未經華碩公司許可,不得任意地仿製、拷貝、謄抄或轉譯。本使用手冊沒有任何型式的擔保、立場表達或其它暗示。若有任何因本使用手冊或其所提到之產品的所有資訊,所引起直接或間接的資料流失、利益損失或事業終止,華碩及其所屬員工恕不為其擔負任何責任。除此之外,本使用手冊所提到的產品規格及資訊僅供參考,內容亦會隨時更新,恕不另行通知。本使用手冊的所有部分,包括硬體及軟體,若有任何錯誤,華碩沒有義務為其擔負任何責任。 當下列兩種情況發生時,本產品將不再受到華碩公司之保固及服務:1)該 產品曾經非華碩授權之維修、規格...
華碩 TS100-E4/PI2 使用手冊 iii 目錄 章節說明 ................................................................................... ix提示符號 .................................................................................... x哪裡可以找到更多的產品資訊 ................................................... x 第一章:系統導覽 1.1 產品包裝內容 .....
iv 3.1 主機板構造圖 ....................................................................... 3-2 3.2 跳線選擇區 .......................................................................... 3-5 3.3 元件與周邊裝置的連接 ...................................................... 3-10 3.3.1 後側面板連接埠 ...................................
華碩 TS100-E4/PI2 使用手冊 vii 使用注意事項 操作伺服器之前請務必詳閱以下注意事項,避免因人為的疏失造成系統 損傷甚至人體本身的安全。 請勿使用非本產品配備的電源線,由於電路設計之不同,將有可能造成內部零件的損壞。 · 使用前,請檢查每一條連接線是否都已經依照使用手冊指示連接妥當, 以及電源線是否有任何破損,或是連接不正確的情形發生。如有任何破損情形,請儘速與您的授權經銷商聯絡,更換良好的線路。 · 伺服器安放的位置請遠離灰塵過多,溫度過高,太陽直射的地方。· 保持機器在乾燥的環境下使用,雨水、溼氣、液體等含有礦物質將會腐 蝕電子線路。 · 使用伺服器時,務必保持周遭散熱空間...
viii 用電安全 電磁安全 · 拆裝任何元件或是搬移伺服器之前,請先確定與其連接的所有電源都已 經拔掉。 · 拆裝任何元件上連接的訊號線之前,請先拔掉連接的電源線,或是先安 裝訊號線之後再安裝電源線。 · 使用一隻手拆裝訊號線,以避免接觸到兩個不同電位表面造成不當的電 流突波衝擊產生。 · 伺服器電源線請勿與其他事物機器共用同一個插座,儘量不要使用延長 線,最好能夠連接一台不斷電系統 UPS。 靜電元件 處理器、記憶體、主機板、介面卡、磁碟機、硬碟機等設備,是由許多 精密的積體電路與其它元件所構成,這些積體電路很容易因為遭受靜電的影響而損壞。因此,在拆裝任何元件之前,請先做好以下的準備:· ...
華碩 TS100-E4/PI2 使用手冊 ix 關於本使用手冊 本使用手冊主要是針對有經驗且具有個人電腦硬體組裝知識的使用者所 撰寫的。本手冊可以幫助您建立起最新、功能強大的 RS100-E4 華碩伺服器。手冊內容介紹本產品各部份元件的拆裝、設定,因此,部份元件可能是選購配備,並未包含在您的產品當中,假如您有需要選購該配備,請向本公司授權經銷商洽詢。 章節說明 本使用手冊的內容結構如下: 第一章:系統導覽 本章以清楚的圖示帶您認識華碩 TS100-E4/PI2 伺服器的功能及特色,包 括系統的前、後面板以及內部功能的介紹。 第二章:硬體安裝 本章以逐步說明的方式,教您如何將系統所需的零組件正確...
在本章中,我們將以清楚的圖示帶 您認識華碩 TS100-E4/PI2 伺服器的功能及特色,其中,包括系統的前、後面板以及內部功能的總體介紹。 第一章 系統導覽 1
1- 第一章:系統導覽 1.1 產品包裝內容 手冊中所提到的各項元件有可能是屬於選購項目,並未包含在您的系統 當中,您必須自行購買以完成整個系統的安裝。在動手組裝整台伺服器系統前,請事先準備好所有必備的元件及工具,以減少組裝過程的中斷與不便。以下列出 TS100-E4/PI2 華碩伺服器系統包裝內的組件,若有任何缺少或損壞,請儘速與您的經銷商聯絡: 標準元件 1. 機殼 華碩 T10 直立式伺服器機殼 2. 主機板 華碩 P5M2-M/C_TS100-E4 主機板 3. 內部組件 250W 電源供應器(提供 110V/230V 電壓切換鈕) 1 x 標準 16x DVD 光碟機或標準 DVD ...
華碩 TS100-E4/PI2 伺服器使用手冊 1- 1.2 系統功能 TS100-E4/PI2 伺服器/工作站採用華碩伺服器級主機板,支援 LGA775 之 Intel Xeon 3000/3200 或 Pentium D(D-stepping) 中央處理器,透過主機板內建晶片組的強大功能,使得本伺服器系統可以支援最新的 I/O、網路以及視訊等功能。以下為本伺服器系統的主要規格及特色: ★列表規格若有變動,恕不另行通知。 機殼 直立式 T10 主機板 華碩 P5M2-M/C_TS100-E4 主機板 晶片組 北橋晶片:Intel Xeon 3000 晶片(Mukiteo-2)南橋晶片:Int...
1- 第一章:系統導覽 1.5 後端面板 TS100-E4/PI2 後端面板包含了所有連接裝置的接頭、系統裝置、風 扇、機殼鎖扣以及外接擴充插槽等。下圖即為 TS100-E4/PI2 伺服器後端面板圖示。 單一電源供應器配置 電源接頭 9 cm 機殼風扇擴充處 4 個介面卡擴充插槽 PS/2 滑鼠連接埠 PS/2 鍵盤連接埠 電源供應器模組 RJ-45 網路埠 2 組 USB 埠 並列埠 1.4 LED 燈號說明 TS100-E4/PI2 伺服器的前端及後端面板包含了許多 LED 狀態顯示燈 號,有關各個燈號所代表的意義,請參考以下的說明。 序列埠 VGA 埠 電源瓦數選擇 LED 燈號 圖示...
這個章節要告訴您如何安裝及移除 TS100-E4/PI2 各個部分的組件,以及在安裝過程中必需注意的事項。 第二章 硬體安裝 2
華碩 TS100-E4/PI2 使用手冊 - 內部構造 當您將側板移除後,您就可以看到 TS100-E4/PI2 伺服器準系統的內 部構造(如下圖所示)。 接著將主機板和機殼上面所預留要安裝的必要硬體,裝上處理器、記 憶體、硬碟裝置和擴充介面卡。 1. 在您要卸下側板之前,請先確認是否已經拔除電源插座。2. 在移開側板之後,要格外留意您手指接觸的內部元件,如風扇 或機殼的邊緣等。
華碩 TS100-E4/PI2 使用手冊 - CPU 只能以單一方向正確地安裝到主機板上的插槽。切記請勿用力地將 CPU 以錯誤的方向安裝到插槽上,這麼做將可能導致 CPU 與插槽上的接腳損壞。 6. 將上蓋重新蓋上,接著將固定 扳手朝原方向推回並扣於固定扣上。 A B 2.3.2 安裝散熱片和風扇 Intel Xeon 3000/3200 或 Pentium D 系列處理器,需要搭配安裝經過特 殊設計的散熱片,方能得到最佳的散熱效能。 ‧ 請在安裝之前確認風扇散熱片上的金屬銅片,或者是 CPU 上面有確實塗上散熱膏。 ‧ 我們建議您使用內附在系統中的華碩標準 Active CPU 散熱器, ...
華碩 TS100-E4/PI2 使用手冊 - 2.4 系統記憶體 2.4.1 概觀 本主機板配置有四組 240-pin DDR2 DIMM(Double Data Rate 2,雙倍 資料傳輸率)記憶體模組插槽。 DDR2 記憶體模組擁有與 DDR 記憶體模組相同的外觀,但是實際上 DDR2 記憶體為 240 針腳,而 DDR 記憶體則為 184 針腳。此外,DDR2 記憶體插槽的缺口也與 DDR 記憶體插槽不同,以防止插入錯誤的記憶體模組。 下圖所示為 DDR2 DIMM 記憶體模組插槽在主機板上之位置。 2.4.2 記憶體設定 您可以任意選擇使用 512MB、1GB 與 2GB 的 unb...
-10 第二章:硬體安裝 2.4.4 取出記憶體模組 請依照下面步驟取出記憶體模組: 2. 再將記憶體模組由插槽中取出。 2.4.3 安裝記憶體模組 安裝/移除記憶體模組或其他的系統元件之前,請先暫時拔出電腦的電源線。如此可避免一些會對主機板或元件造成嚴重損壞的情況發生。 ‧ 由於 DDR2 DIMM 記憶體模組金手指部份均有缺口設計,因此只 能以一個固定方向安裝到記憶體模組插槽中。安裝時僅需對準金手指與插槽中的溝槽,再輕輕置入記憶體模組即可。請勿強制插入以免損及記憶體模組。 ‧ DDR2 記憶體插槽並不支援 DDR 記憶體模組,請勿將 DDR 記憶 體模組安裝至 DDR2 記憶體插槽上。 在...
華碩 TS100-E4/PI2 使用手冊 -11 2.5 安裝硬碟機 本 工 作 站 / 伺 服 器 產 品 , 提 供 一 個可分離的硬碟擴充盒,能讓您安裝一組 IDE/SATA 硬碟機。 硬碟擴充盒 您可以選購第二個硬碟擴充盒,來安裝額外的硬碟機。請參考下一頁的安裝步驟來進行裝入硬碟機。 安裝硬碟機 機殼內搭配一組這組可拆卸的硬碟擴充盒,可以讓您裝入 SATA 硬碟 機。當您要進行安裝第一個 SATA 硬碟時,請先卸除此擴充盒。請依照以下的步驟來進行安裝: 當您在進行硬碟安裝時,請先將硬碟設定為您所要的 Master (主要)或 Slave(次要)裝置。請參考硬碟產品內所提供的使用說明,來...
-1 第二章:硬體安裝 2. 然後置入一顆您要擴充的硬碟 機,並注意硬碟機上的螺絲孔要對準擴充架上的螺絲孔位。 千萬不要將硬碟放入位於此擴充盒上面的下方位置。 螺絲孔 4. 從硬碟底部鎖上 3 顆螺絲固定 (如圖中的圈選處)。 5. 將硬碟專用的電源線與排線做 連接,並將另一端 SATA 排線連接至主機板 SATA 插座上。 1. 首先請朝箭頭方向來下壓硬碟 擴充盒上的固定扣,接著向外抽出擴充盒,直到脫離機殼。 然後將此擴充盒放在一個平坦的桌面上。 接著若您要安裝第 2 顆 SATA 硬碟,請依照以下的步驟進行:
華碩 TS100-E4/PI2 使用手冊 -1 本 工 作 站 / 伺 服 器 產 品 , 提 供 四 組 5 . 2 5 吋 裝 置 擴 充 槽 。 而 您 可以安裝 DVD 光碟機於第一個插槽內,而其餘的三個插槽,則可以讓您增加額外的如燒錄機等 5.25 吋裝置。 在您準備安裝或移除任何系統組件之前,請先確認 AC電源線已經拔除,如果您沒有拔除電源便貿然進行這些動作,可能會導致系統與相關零組件的損毀。 2.6 安裝 5.25 吋裝置 當您要安裝擴充的 5.25 吋裝置時,請移除前面板。 2.6.1 移除前面板 請依照以下的方式來移除前面板: 2. 接著用手按圖示箭頭的方向, 將側板往後抽離...
華碩 TS100-E4/PI2 使用手冊 - 2.9 連接排線 華碩 TS100-E4/PI2 機殼內包含電源供應器與相關電源線,讓您可以 與主機板、硬碟儲存裝置,以及其他您所安裝的其他裝置。 1. 4-pin 12V AUX 電源 2. 24-pin ATX 電源3. 軟碟機排線插座4. 前面板 USB 連接插座 5. 單一 IDE 排線插座 6. Serial ATA 連接插座7. 系統面板連接插座8. 系統風扇連接插座 有關各連接插座的詳細說明,請參考第三章:主機板資訊的介紹。 本伺服器出廠時已將大部分所需的排線及電源線都安裝在正確的接頭 即 插 座 上 。 當 您 想 要 自 行 加 ...
在本章中要告訴您在安裝系統元件 時所必須完成的主機板安裝程序。詳細內容有:頻率開關設定、跳線選擇區設定以及主機板的各種裝置接頭。 第三章 主機板資訊 3
- 第三章:主機板資訊 3.1 主機板構造圖 P5M2-M/C_TS100-E4 主機板 24.5cm (9.6in) 24.5cm (9.6in) ATXPWR1 PM-M/C_TS100-E LGA775ll CPU_FAN1 CPU_FAN2 REAR_FAN 1 REAR_FAN2 FRNT_FAN2 ATX12V1 DDRV 1 FM_FRNT1 USB34 USBPW34 SATA1SATA2SATA3SATA4 8Mbit Flash BIOS AUX_PANEL 1 HDLED 1 PRI_IDE1 RECOVERY1 CLRTC1 RAID_SEL1 VGA_EN1 FM_R...
華碩 TS100-E4/PI2 使用手冊 - 主機板元件說明 插槽/插座 頁 1. CPU Sockets 2-5 2. DDR2 DIMM slots 2-9 3. PCI/PCI Express slots 2-18 跳線選擇區 頁 1. Clear RTC RAM (3-pin CLRTC1) 3-5 2. CPU fan pin selection (3-pin FM_CPU1, FM_CPU2) 3-6 3. USB device wake-up (3-pin USBPW12, USBPW34) 3-6 4. Keyboard/Mouse power (3-pin KBPWR1) 3...
-10 第三章:主機板資訊 3.3 元件與周邊裝置的連接 3.3.1 後側面板連接埠 本節將個別描述主機板後側面板的接針、接頭等功能。 1. PS/2 滑鼠連接埠(綠色):將 PS/2 滑鼠插頭連接到此埠。2. 並列埠:這組 25-pin連接埠可以連接印表機、掃描器或者其他的並列埠 裝置。 3. Gigabit LAN1(RJ-45)網路連接埠:這組連接埠,可經由網路線連接至 區域網路。請參考下表中各燈號的說明。 4. VGA 接頭:這組 15-pin 接頭可以用來連接顯示器。5. 序列埠接頭(COM1):這組 9-pin 接頭可用來連接序列裝置。6. USB 2.0 連接埠(1 和 2):這...
-1 第三章:主機板資訊 PM-M/C_TS100-E ® PM-M/C_TS100-E IDE Connector NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. PRI_IDE1 PI N 1 2. ICH7R Primary IDE 裝置連接插座(40-1 pin PRI_IDE1) 本主機板上提供一組 IDE 裝置插座,可以讓您連接一條 Ultra DMA/100/66 IDE 排線,而這條排線可以連接兩個 IDE 裝置 (像是硬碟、CD-ROM、ZIP 或 MO 等)。如...
華碩 TS100-E4/PI2 使用手冊 -1 3. Serial ATA 裝置連接插槽(7-pin SATA1, SATA2, SATA3, SATA4) 這些插槽可以支援使用細薄的 Serial ATA 排線,來連接 Serial ATA 硬碟。若您安裝了 Serial ATA 硬碟裝置,您就可以透過 Intel Matrix Storage 技術 來建立 RAID 0 與 RAID 1 設定,或使用在 Intel ICH7R 南橋晶片環境下所提供的 LSI MegaRAID 工具程式建立 RAID 0 與 RAID 1 設定。 這些插槽的預設值為 IDE 模式。在 IDE 模式中,您可以...
華碩 TS100-E4/PI2 使用手冊 -1 6. 序列埠 COM2 插槽(10-1 pin COM2) 序列埠可以連接滑鼠等輸入裝置、數據機或數位相機等其他裝置使用, 您可以透過 BIOS 設定程式來設定序列埠功能。要使用本主機板的 COM,您必須將包裝中的後機殼連接 COM2 擋板模組,先行安插在主機板上的 COM2 插槽上,然後將要連接到 COM2 的裝置連接妥當。 7. 中央處理器/系統風扇電源插座 (3-pin CPU_FAN1, CPU_FAN2) 您可以將 350mA~740mA(最大 8.88W)或者一個合計為 2.1 ~4.44 安培 (最大 53.28 瓦)的+12 伏特...
華碩 TS100-E4/PI2 使用手冊 -1 10. 主機板電源插座(24-pin ATXPWR1, 4-pin ATX+12V2) 這個插座為提供給 ATX 電源供應器使用。由電源供應器所提供的連接插 頭已經過特別設計,只能以一個特定方向插入主機板上的電源插座。找到正確的插入方向後,僅需穩穩地將之套進插座中即可。 PM-M/C_TS100-E ® PM-M/C_TS100-E ATX Power Connectors 24-pin Power Connector ATXPWR1 +3 Vo lts +3 Vo lts Ground +5 Vo lts +5 Vo lts Ground Gr...
第四章 BIOS 程式設定 4 BIOS 程式調校的優劣與否,和整個 系統的運作效能有極大的關係。針對自己的配備來作最佳化 BIOS 設定,可讓您的系統性統再提升。本章節將逐一說明 BIOS 程式中的每一項組態設定。
第四章:BIOS 程式設定 - 4.1 管理、更新您的 BIOS 程式 下列軟體讓您可以管理與更新主機板上的 BIOS 設定。 1. ASUS AFUDOS:在 DOS 模式下,以開機磁片來更新 BIOS 程式。2. ASUS CrashFree BIOS 2:當 BIOS 程式毀損時,以開機磁片或驅動程式及 公用程式光碟來更新 BIOS 程式。 3. ASUS Update:在 Windows 作業系統中更新 BIOS 程式。 上述軟體請參考相關章節的詳細使用說明。 建議您先將主機板原始的 BIOS 程式備份到一片開機片中,以備您往後需要再度安裝原始的 BIOS 程式。使用 AFUDOS 或...
華碩 TS100-E4/PI2 使用手冊 - 4.1.2 使用 AFUDOS 更新 BIOS 程式 AFUDOS 軟體讓您可以在 DOS 環境下,使用存有最新的 BIOS 程式的開機 片來更新 BIOS 程式。AFUDOS 軟體也可以將現行系統中的 BIOS 程式設定複製到磁碟片或硬碟中,這份複製的磁碟片或硬碟,可以作為當 BIOS 程式失去作用或系統毀損時的備份檔案。 複製現行系統中的 BIOS 程式 請依照以下步驟複製現行系統中的 BIOS 程式。 · 請 先 確 認 磁 片 不 是 寫 入 保 護 的 狀 態 , 並 且 有 足 夠 的 空 間 ( 至 少 1024KB)可以儲存檔案。 ...
第四章:BIOS 程式設定 - 更新 BIOS 程式 請依照以下步驟使用 AFUDOS 程式更新 BIOS 程式。 1. 從華碩網站(tw.asus.com)下載最新的 BIOS 檔案,將檔案儲存在開機磁 片中。 請準備一張紙將 BIOS 的檔名寫下來,因為在更新過程中,您必須鍵入正確的 BIOS 檔案名稱。 2. 將 AFUDOS.EXE 程式由驅動程式及公用程式光碟中複製到存有 BIOS 檔 案的開機磁片中。 3. 開機後進入 DOS 模式,鍵入下列命令列: afudos /[filename] 上列當中的「filename」指的就是由驅動程式及公用程式光碟拷貝至開機 片的最新(或原始的)...
華碩 TS100-E4/PI2 使用手冊 - 5. 當 BIOS 程式更新的程序完成之後,就會回到 DOS 視窗畫面,然後再重 新開機。 A:\>afudos /iTS100-E4.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ....... done Erasing flash ......
第四章:BIOS 程式設定 - 4.1.3 使用 CrashFree BIOS 2 程式回復 BIOS 程式 華碩最新自行研發的 CrashFree BIOS 2 工具程式,讓您在當 BIOS 程式和 資料被病毒入侵或毀損時,可以輕鬆的從驅動程式及公用程式光碟中,或是從含有最新或原始的 BIOS 檔案的磁片中回復 BIOS 程式的資料。 1. 在執行更新 BIOS 程式之前,請準備隨貨附贈的驅動程式及公用光碟 程式,或是存有 BIOS 檔案的磁碟片。 2. 請確認在磁片中的 BIOS 檔案有重新命名為 TS100-E4.ROM。 使用磁碟片回復 BIOS 程式 請依照以下步驟使用磁碟片回復 B...
華碩 TS100-E4/PI2 使用手冊 - 使用公用程式光碟回復 BIOS 程式 請依照以下步驟回復 BIOS 程式。 1. 將磁碟機中的磁片取出,然後啟動系統。2. 將驅動程式及公用程式光碟放入光碟機。3. 接著會顯示如下圖所示的訊息,並自動檢查磁片中原始的或最新的 BIOS 檔案。 Bad BIOS checksum. Starting BIOS recovery...Checking for floppy... Bad BIOS checksum. Starting BIOS recovery...Checking for floppy... Floppy not found! Che...
第四章:BIOS 程式設定 - 4.1.4 華碩更新程式 華碩更新程式是一套可以讓您在 Windows 作業系統下,用來管理、儲存 與更新主機板 BIOS 檔案的公用程式。您可以使用華碩更新程式來執行以下的功能:‧ 儲存系統現有的 BIOS 程式。‧ 從更新的 BIOS 檔案更新 BIOS 程式。‧ 查看 BIOS 程式的版本。 這個程式可以在主機板附贈的驅動程式及公用程式光碟中找到。 安裝華碩更新程式 請依照以下的步驟安裝華碩更新程式。 1. 將驅動程式及公用程式光碟放入光碟機中,會出現「驅動程式」選單。2. 點選「公用程式」標籤,然後點選「華碩更新程式 VX.XX.XX」。3. 華碩線上更...
華碩 TS100-E4/PI2 使用手冊 - 2. 在 下 拉 式 選 單 中 選 擇 U p d a t e BIOS from the Internet,然後按下「Next」繼續。 3. 請選擇離您最近的華碩 FTP 站台 可 避 免 網 路 壅 塞 , 或 者 您 也 可 以直接選擇「Auto Select」 由系統自行決定。按下「Next」繼續。 使用網路更新 BIOS 程式 請依照以下步驟使用網路更新 BIOS 程式。 1. 點選「開始→程式集→ASUS→ASUSUpdate→ASUSUpdate」執行華碩線上 更新主程式。
第四章:BIOS 程式設定 -10 4. 接 著 再 選 擇 您 欲 下 載 的 B I O S 版 本。按下「Next」繼續。 5. 最 後 再 跟 著 畫 面 上 的 指 示 完 成 BIOS 更新的程序。 3. 在 「 開 啟 」 的 視 窗 中 選 擇 B I O S 檔 案 的 所 在 位 置 , 然 後 點 選 「 儲存」。 4. 最 後 再 依 照 螢 幕 畫 面 的 指 示 來 完 成 BIOS 更新的程序。 華碩線上更新程式可以自行透過網路下載 BIOS 程式。經常的更新才能獲得最新的功能。 1. 點 選 「 開 始 → 程 式 集 → A S U S → ASUSUpdat...
第四章:BIOS 程式設定 -1 4.3 主選單(Main Menu) 當您進入 BIOS 設定程式時,首先出現的第一個畫面即為主選單,內容如 下圖。 請參閱「5.2.1 BIOS 程式選單介紹」來得知如何操作與使用本程式。 Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system date. Select Screen Select Item +- Change Option Tab Select Field F1 General Help F10 Save and Exit...
第四章:BIOS 程式設定 -1 4.3.5 IDE 裝置設定(IDE Configuration) 本選單讓您設定或變更 IDE 裝置的相關設定。請選擇您想要的項目並按 <Enter> 鍵來進行各項裝置的設定。 V02.58 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Main IDE Configuration Configure SATA as [Standard IDE] Onboard IDE Operate Mode [Enhanced Mode] Enhanced Mode Suppor...
第四章:BIOS 程式設定 -1 4.3.6 系統資訊(System Information) 本選單可自動偵測系統的 BIOS 版本、處理器與記憶體相關資料。 AMI BIOS 本項目顯示自動偵測到的 BIOS 程式資料。 Processor 本項目顯示自動偵測到目前所使用的的中央處理器資料。 System Memory 本項目顯示自動偵測到目前所使用的系統記憶體容量。 V02.58 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Main AMIBIOS Version : 0115 Build Da...
華碩 TS100-E4/PI2 使用手冊 -1 4.4 進階選單(Advanced menu) 進階選單可讓您改變中央處理器與其他系統裝置的詳細設定。 注意!在您設定本進階選單的設定時,不正確的數值將導致系統損毀。 V00.00 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Main Advanced Power Boot Exit Configure the Multi- Processor Table. USB Configuration MPS Configuration Remote Acces...
第四章:BIOS 程式設定 -0 MPS Table Version [1.4] 本項目用來選擇多顆處理器系統(MPS)版本。設定值有:[1.1] [1.4]。 V00.00 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Advanced CPU Configuration MPS Table Version [1.4] →← Select Screen ↑↓ Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit S...
華碩 TS100-E4/PI2 使用手冊 -1 4.4.3 遠端存取設定(Remote Access Configuration) 本選單可讓您進行遠端存取功能的設定。 V00.00 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Advanced →← Select Screen ↑↓ Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit Select Remote Access type. Configure Re...
第四章:BIOS 程式設定 - Teminal Type [ANSI] 本項目可讓您設定目標終端器的類型。設定值有:[ANSI] [VT100] [VT- UTF8]。 VT-UTF8 Combo Key Support [Disabled] 本項目可以讓您啟動或關閉在 ANSI 或 VT100 終端器下所支援的 VT- UTF8 組合碼。設定值有:[Disabled] [Enabled]。 Media Tyoe [Serial] 本項目提供資料傳輸介面設定。設定值有:[Serial] [LAN] [Serial+LAN] 。 V00.00 (C)Copyright 1985-2004, Am...
華碩 TS100-E4/PI2 使用手冊 - 若您使用 RedHat Liunx/Advanced Server 3.0 UP5/UP6 作業系統,請將本項目選擇為 [Disabled](關閉)。 DRAM RAS# Activate to Precharge Delay [15 DRAM Clocks] 本項目用於控制提供給 SDRAM 參數使用的 SDRAM 時脈週期期數。設定值有:[1 DRAM Clocks] [2 DRAM Clocks] ∼ [15 DRAM Clocks]。 DRAM Write Recovery Time [4 Clocks] 設定值有:[2 Clocks] [...
第四章:BIOS 程式設定 - BIOS SETUP UTILITY Advanced Configure W83627EHF-A Super IO Chipset Serial Port1 Address [3F8/IRQ4] Serial Port2 Address [2F8/IRQ3] Serial Port2 Mode [Normal] Parallel Port Address [378] Parallel Port Mode [ECP] ECP Mode DMA Channel [DMA3] Parallel Port IRQ [IRQ7] ENABLE: Allow remapp...
華碩 TS100-E4/PI2 使用手冊 - 4.4.8 PCI 隨插即用裝置(PCI PnP) 本選單可讓您變更 PCI/PnP 裝置的進階設定,其包含了供 PCI/PnP 裝置所 使用的 IRQ 位址與 DMA 通道資源或舊式的 ISA 裝置,與提供給這些舊式ISA 裝置使用的記憶體區塊大小設定。 注意!在您進行本進階選單的設定時,不正確的數值將導致系統損毀。 V00.00 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Advanced Advanced PCI/PnP Settings WARNI...
第四章:BIOS 程式設定 - IRQ-xx assigned to [PCI Device] 當設定為 [PCI Device],指定的 IRQ 位址可以讓 PCI/PnP 硬體裝置使用。 當設定為 [Reserved],IRQ 位址會保留給 ISA 硬體裝置使用。設定值有:[PCI Device] [Reserved]。 V00.00 (C)Copyright 1985-2004, American Megatrends, Inc. ACPI APIC Support [Enabled] APM Configuration Hardware Monitor →← Select Screen...
第四章:BIOS 程式設定 -0 V00.00 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Power Hardware Monitor CPU Throttle Temp. Margin [49ºC/120ºF] MB1 Temperature [47ºC/114ºF] MB2 Temperature [47ºC/114ºF] CPU Fan1 Speed [3884RPM] CPU Fan2 Speed [N/A] Front Fan1 Speed [N/A] Front Fan2 Speed [...
華碩 TS100-E4/PI2 使用手冊 - Quick Boot [Enabled] 本項目可讓您決定是否要略過主機板的自我測試功能(POST),開啟本 項目將可加速開機的時間。當設定為 [Disabled] 時,BIOS 程式會執行所有的自我測試功能。設定值有:[Disabled] [Enabled]。 Full Screen Logo [Enabled] 若您要使用個人化開機畫面,請將本項目設定為啟用 [Enable]。設定值 有:[Disabled] [Enabled]。 V02.58 (C)Copyright 1985-2004, American Megatrends, Inc. ...
第四章:BIOS 程式設定 - 4.6.4 安全性選單(Security) 本選單可讓您改變系統安全設定,請選擇所需的項目並按一下 <Enter> 鍵 以顯示子選單項目。 V00.00 (C)Copyright 1985-2004, American Megatrends, Inc. Security Setting Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password →← Select Screen ↑↓ ...
第四章:BIOS 程式設定 - Change User Password(變更使用者密碼) 本項目是用於變更使用者密碼,運作狀態會於畫面上方以淡灰色顯示, 預設值為 Not Installed。當您設定密碼後,則此項目會顯示 Installed。 設定使用者密碼(User Password): 1. 選擇 Change User Password 項目並按下 [Enter]。2. 在 Enter Password 視窗出現時,請輸入欲設定的密碼,可以是六個字元 內的英文、數字與符號。輸入完成按下 [Enter]。 3. 接著會再出現 Confirm Password 視窗,再一次輸入密碼以確認...
華碩 TS100-E4/PI2 使用手冊 - 4.7 離開 BIOS 程式(Exit menu) 本選單可讓您讀取 BIOS 程式出廠預設值與離開 BIOS 程式。 Exit & Save Changes 當您調整 BIOS 設定完成後,請選擇本項目以確認所有設定值存入 CMOS 記憶體內。按下 <Enter> 鍵後將出現一個詢問視窗,選擇 [Yes],將設定值存入 CMOS 記憶體並離開 BIOS 設定程式;若是選擇 [Cancel],則繼續 BIOS 程式設定。 Exit & Discard Changes 若您想放棄所有設定,並離開 BIOS 設定程式,請將高亮度選項移到...
第四章:BIOS 程式設定 - Load Setup Defaults 若您想放棄所有設定,將所有設定值改為出廠預設值,您可以在任何一 個選單按下 <F5>,或是選擇本項目並按下 <Enter> 鍵,即出現詢問視窗,選擇 [OK],並按下 <Enter> 鍵,將所有設定值改為出廠預設值,並繼續 BIOS 程式設定;若是選擇 [Cancel],並按下 <Enter> 鍵,則繼續 BIOS 程式設定。
- 第五章:磁碟陣列設定 5.1 RAID 功能設定 本主機板所內建的 Intel 南橋 ICH7R 晶片支援 LSI Logic Embedded SATA RAID Utility 與 Intel ® Matrix Storage Manager 功能設定,可讓您使 用 Serial ATA 介面硬碟來規劃建立 RAID 0 與 RAID 1 磁碟陣列設定。 5.1.1 RAID 功能說明 RAID 0 的主要功能為「Data striping」,即區塊延展。其運作模式是 將磁碟陣列系統下所有硬碟組成一個虛擬的大硬碟,而資料存取方式是平均分散至多顆硬碟,是以並行的方式讀取/寫入資料至多顆硬...
- 第五章:磁碟陣列設定 5.2 進入 Intel ® Matrix Storage Manager Option ROM 公用程式 Intel Matrix Storage Manager Option ROM 公用程式經由南橋晶片的支 援,可讓您使用連接到主機板上 Serial ATA 連接埠上的 Serial ATA 硬碟機建立 RAID 0 或 RAID 1的磁碟陣列設定。 請依下列步驟進入 Intel Matrix Storage Manager Option ROM 公用程式: 1. 安裝好所有的 Serial ATA 硬碟機,並啟動您的電腦。2. 當系統執行開機自我檢測程序(PO...
華碩 TS100-E4/PI2 使用手冊 - 5.2.5 退出 Intel Matrix Storage Manager 公用程式 請依照下列步驟來退出公用程式︰ 1. 在公用程式主選單中,請選擇 4. Exit 然後按下 <Enter> 按鍵,會 出現如下圖所示的視窗畫面。 2. 請按下 <Y> 鍵以退出或按下<N>鍵回到功能設定主選單。 5.2.4 重新設定硬碟為非陣列硬碟 請注意!當您將 RAID 陣列硬碟設定為無 RAID 陣列狀態時,所有磁碟陣列中的資料與陣列本身的結構資料都將被移除。 請依照下列步驟重新設定 RAID 硬碟。 1. 選擇選項 3. Reset Disks to No...
-1 第五章:磁碟陣列設定 5.3 LSI Logic Embedded SATA 功能設定 LSI Logic Embedded SATA 磁碟陣列設定程式可以提供您建立 RAID 0 或 RAID 1 設定,經由主機板上的所內建的 ICH7R 南橋晶片所連接的 SATA 硬碟機來建立。 當已於 BIOS 程式設定中將 SATA RAID 項目設定啟用為 RAID 模式時,若您有安裝 2 顆相同規格容量的硬碟時,LSI Logic Embedded SATA 磁碟陣列程式會自動偵測設定 RAID 1。 請依照以下的步驟來開啟 LSI Logic Embedded SATA 磁碟陣列程式: 1...
-1 第五章:磁碟陣列設定 3. 在 ARRAY SELECTION MENU 畫面中,顯示目前連接且可用的 SATA 硬碟機有多少部。選擇您要進行設定 RAID 的硬碟機,然後按下 <空白> 鍵。當選擇時,硬碟指示會從 READY 變更成 ONLIN A[X] - [Y],而 X 所代表的是任何數字,且 Y 表示硬碟裝置的數字代號。 當您選擇該設定項目時,底下則會出現相關的提示說明。 使用 Easy Configuration 設定 請依照以下的步驟,使用 Easy Configuration(簡易設定)模式來進行 RAID 功能的設定:1. 進入主設定畫面後,選擇 Config...
華碩 TS100-E4/PI2 使用手冊 -1 4. 選擇所有必須加入此 RAID 設定的硬碟裝置,然後按 <Enter> 鍵,則 所有可設定的陣列會顯示在畫面中。 5. 按 <F10> 鍵,選擇可設定的陣列,然後按下 <空白> 鍵。 再按 <F10> 鍵一次,這時會看到欲建立磁碟陣列的相關訊息,且包含讓您可以進行變更的邏輯磁碟機的畫面。
-1 第五章:磁碟陣列設定 使用 New Configuration 設定 請依照以下的步驟,使用 New Configuration (新增設定)模式來建立 一個 RAID 設定:1. 進入主設定畫面後,選擇 Configure 選項,然後按下 <Enter> 鍵。2. 使用方向鍵移動來選擇 New Configuration 項目,然後按下 <Enter> 鍵 繼續。 當一個 RAID 設定已經存在了,使用 New Configuration 指令來清除存在的 RAID 設定資料。若您不要刪除已存在的 RAID 設定,使用 View/Add Configuratio...
華碩 TS100-E4/PI2 使用手冊 -1 5.3.2 增加或檢視一個 RAID 設定 您可以使用 View/Add Configuration 功能來增加一個新的 RAID 或者是 檢視一個現存的 RAID 設定。 新增一個 RAID 設定 請依照以下的步驟,增加一個 RAID 設定: 1. 進入主設定畫面(Management Menu)後,選擇 Configure 選項,然後 按下 <Enter> 鍵。 2. 使用方向鍵移動來選擇 View/Add Configuration 項目,然後按 <Enter> 鍵繼續。 3. 在 ARRAY SELECTION M...
- 第五章:磁碟陣列設定 5.3.3 將邏輯磁碟初始化 當您完成建立 RAID 設定時,您必須將邏輯磁碟做初始化。您可以透 過主畫面中的 Initialize 或 Objects 選項,來進行邏輯磁碟初始化的動作。 使用 Initialize 指令設定 請依照以下的步驟,來使用 Initialize(初始化)功能: 1. 進入主設定畫面後,選擇 Initialize 選項,然後按下 <Enter> 鍵。 2. 畫面中會顯示可以進行初始動作的 RAID 設定,以及提示您選擇邏輯 磁碟來進行初始化。使用方向鍵來選擇在 Logical Drive 中的邏輯磁碟裝置,然後按下 <En...
華碩 TS100-E4/PI2 使用手冊 - 3. 當出現提示時,按下 <空白> 鍵來從 Initialize 的對話框中選擇 Yes, 然後按下 <Enter> 鍵。您也可以透過按下 <F10> 鍵來初始化硬碟裝置,而不需要再做任何確認動作。 初始化硬碟裝置的動作,將會清除所有硬碟內的資料。 4. 當前面的度作確認後,這時會看到進行中進度百分比,若您要放棄 進行,請按下 <Esc> 鍵取消。
- 第五章:磁碟陣列設定 5. 當初始化的動作完成後,請按下 <Esc> 鍵。 使用 Objects 指令設定 請依照以下的步驟,來使用 Objects 功能: 1. 進入主設定畫面後,選擇 Objects 選項,然後按下 <Enter> 鍵。
華碩 TS100-E4/PI2 使用手冊 - 5.2.4 重新建立損壞的硬碟 您可以採用手動的方式重新建立損壞的硬碟裝置,透過使用主畫面中 的 Rebuild 或 Objects 指令來達成。 使用 Rebuild 指令 請依照以下的步驟,來重新建立損壞的硬碟: 1. 進入主設定畫面後,選擇 Rebuild 選項,然後按下 <Enter> 鍵。 2. 在 PHYSICAL DRIVES SELECTION MENU 畫面中,顯示目前連接且可 用的 SATA 硬碟機有多少部。選擇您要進行重新建立的硬碟機,然後按下 <空白> 鍵。
- 第五章:磁碟陣列設定 3. 當選擇欲重新建立的硬碟之後並按下 <F10> 鍵,所選擇的硬碟裝置 則會顯示 RBLD 的指示。 4. 當出現對話框時,請按下 <Y> 來重新建立硬碟裝置。 5. 當重建完成時,請按下任一鍵繼續。 使用 Object 指令設定 您也可以使用 Object 指令,來重建一個損壞的硬碟裝置: 1. 從主畫面(Management Menu),選擇 Object 選單中的 Physical Drive 選項。 2. 使用方向鍵,來選擇您所要進行重建(rebuild)的實體硬碟(physical drive),然後按 <Enter> ...
華碩 TS100-E4/PI2 使用手冊 - 5.3.5 檢查硬碟資料的一致性 您可以檢查與核對所選擇硬碟裝置裡的資料一致性的正確性。這個工 具程式自動偵測與或採自動偵測與正確的資料任何差異,選擇 Objects > Adapter 選項來進行。 Check Consistency(一致性檢查)指令可用在包含 RAID 1 設定下的邏輯磁碟機。 使用 Check Consistency 指令設定 請依照以下的步驟,使用 Check Consistency 指令檢查資料的一致性: 1. 進入主畫面,選擇 Check Consistency 選項,然後按下 <Enter> 鍵。 ...
華碩 TS100-E4/PI2 使用手冊 -1 使用 Objets 指令 請依照以下的步驟,使用 Objets 指令檢查資料的一致性: 1. 進入主畫面(Management Menu),選擇 Objets 選單中的 Logical Drive 選項。 2. 使用方向鍵來選擇您所要檢查的邏輯磁碟機,然後按下 <Enter> 鍵。3. 從子選單中,選擇 Check Consistency,然後按下 <Enter> 鍵。4. 當出現對話框時,按下 <Y> 來開始進行檢查硬碟。5. 當完成檢查動作時,按下任一鍵繼續。
- 第五章:磁碟陣列設定 5.3.8 開啟 WriteCache 您可以開啟 RAID 控制功能的 WriteCache 選項,來增加資料傳輸時的 效能。 您可以依照以下的步驟,來啟用 WriteCache 功能: 1. 進入主畫面後,選擇 Objects > Adapter ,然後按下 <Enter> 鍵顯示改 寫的特性。 2. 選擇 WriteCache,然後按下 <Enter> 鍵來選擇 On(開啟)。 當您開啟 WriteCache 功能時,您可能會在當一個電源間歇發生在硬碟間傳輸或交換過程時,遺失檔案。 3. 當完成選擇後,按下任一鍵繼續。 5.4 Gl...
第六章 驅動程式設定 6 在本章節中,我們將介紹伺服器內 所 支 援 的 相 關 驅 動 程 式 的 安 裝 與 設 定說明。
華碩 TS100-E4/PI2 使用手冊 - 若於 Red Hat Linux Enterprise 版本中,且您在 Makedisk 畫面中未找到您要建立的驅動程式類型,請進入公用程式光碟中的 \ICH7R LSI RAID\Driver\Liunx 中將 RAID 驅動程式的檔案複製到一張空白磁片中。 6.1.2 安裝 RAID 驅動程式 Windows 2003 Server 作業系統 當 Windows 2003 Server 系統安裝時 當 Windows 2003 Server 系統安裝時,請安裝 RAID 驅動程式: 1. 使用 Windows 2003 Server 系統安裝光...
第六章:安裝驅動程式 - 4. 放入先前製作好的 RAID 驅動程式磁碟片於軟碟機中,然後按 <Enter> 鍵。 5. 從下面的清單中選擇您要安裝的 RAID 控制驅動程式,再按 <Enter> 鍵。 LSI Logic Embedded SATA RAID 從 32bit Windows 2003 Server 作業系統中選擇 "LSI Loigc Embedded SATA RAID",然後按 <Enter> 鍵。 若是 64bit Windows 2003 Server 作業系統,請選擇 "LSI Logic Embedded...
華碩 TS100-E4/PI2 使用手冊 - Intel Matrix Storage Manager 從清單中選擇 "Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7RRDH)" 給 Intel Matrix Storage RAID 模式安裝使用,然後按下 <Enter> 鍵。 若您在 BIOS 程式 IDE Configure 設定中,將 SATA 設定為 AHCI 模式,首先在 Windows 安裝過程中安裝 Intel SATA AHCI Driver,然後從清單中選擇 "Intel(R)...
第六章:安裝驅動程式 - 在 Windows 2003 Server 系統下安裝 在 Windows 2003 Server 系統安裝下安裝 RAID 驅動程式:1. 重新開機,使用 Administrator(主管理者)登入 Windows 系統。2. W i n d o w s 系 統 會 自 動 偵 測 到 需 要 安 裝 硬 體 驅 動 程 式 ( N e w H a r d w a r e Found)的視窗提示,然後請先點選畫面中的 Cancel 鈕。 3. 使用滑鼠按右鍵選擇桌面上的 My Computer(我的電腦)圖示,然後從彈 出的選單中,選擇 Properties(內容)...
華碩 TS100-E4/PI2 使用手冊 -11 在 SuSE Liunx 系統下安裝 請依照以下的步驟,於 SuSE Linux 作業系統下安裝 RAID 控制晶片的驅 動程式:1. 使用 SuSE 作業系統安裝光碟開機。2. 從 Boot Options 畫面中選擇 Installation 選項,然後按下 <Enter> 鍵繼續。 3. 此時,右下方會出現一個提示訊息,要求您放入驅動程式磁碟片於軟碟 機中,然後按下 <F6> 鍵。 在 SuSE Linux Enterprise Server 9.01 SP1 作業系統環境下,請不要使用作業系統內建的驅動程式,否則...
華碩 TS100-E4/PI2 使用手冊 -1 6.2 安裝網路驅動程式 本章節將介紹如何安裝 Broadcom Gigabit 網路驅動程式。 6.2.1 在 Windows 2000/2003 Server 系統下安裝 請依照以下的步驟,在 Windows 2000/Server 2003 系統中安裝 Broadcom Gigabit 網路驅動程式:1. 重新開機,使用 Administrator(主管理者)登入 Windows 系統。2. 於光碟機中放入主機板/系統所附的公用程式與驅動程式光碟片,若您的 系統已經啟動了光碟機「自動安插通知」的功能,那麼稍後一會光碟片會自動顯示 Drive...
第六章:安裝驅動程式 -1 4. 當安裝精靈視窗出現時,請依照畫面指示按 Next 按鈕進行安裝至完成。 6.2.2 在 Red Hat Enterprise ver. 3.0 系統下安裝 當您要在 Red Hat Enterprise ver. 3.0 系統下安裝 Broadcom Gigabit 網路驅 動程式時,請依照以下的步驟來進行安裝 : 從 TAR 檔案建立驅動程式 請依照以下的步驟,來從 TAR 檔案建立驅動程式: 1. 建立目錄並將 TAR 檔案解壓縮。 tar xvzf bcm5700-<version>.tar.gz 2. 建立 bcm5700.o 驅動程式作為...
第六章:安裝驅動程式 -1 6.4 安裝管理應用與工具程式 在主機板所附的公用與驅動程式光碟中,包含有驅動程式、管理應用程 式,以及一些工具程式,讓您可以搭配在主機板上操作使用。 公用與驅動程式光碟片中的連絡資訊,可能會因為不定時的情況而有所更動。請參考華碩網頁(tw.asus.com)上的訊息來更新至最新的連絡資訊。 如果 Drivers 選單並未自動出現,那麼您也可以公用程式與驅動程式光碟片中的 BIN 檔案夾裡面直接點選 ASSETUP.EXE 主程式來開啟選單視窗。 主選單的安裝畫面可能會因為您的作業系統不同,而有所差別。 6.4.1 執行公用與驅動程式光碟 將此光碟片放入系統的光碟機...
附錄 A- A.1 Intel ® EM64T 技術 使用 Intel ® EM64T 功能 請依照以下的方式來使用 Intel ® EM64T 功能: 1. 安裝一顆支援 Intel EM64T 技術的 Intel Xeon 3000 處理器。2. 安裝 64 位元作業系統(Windows ® XP Professional x64 Edition 或 Windows Server 2003 x64 Edition)。 3. 從公用與驅動程式光碟片中,安裝主機板上各連接埠與裝置專用的 64 位元驅動程式。 4. 若還有其他需要安裝的裝置,如主機板上的介面卡或欲裝入的硬體裝 置,請一併再安裝專...
附錄 A- 輸出電壓 最大 (A) +3.3V 16A +5V 18A +12V1 10A +12V2 14A -12V 0.3A +5VSB 2.5A +5V&3.3V 最大 115W+12V1&+12V2 最大 235W12V1&+12V2 的總和輸出電壓為 19A(最大) A.4.2 規格 標準輸出電壓 輸入電壓範圍 115V~/6A or 230V~/3A, (經由選擇電壓的開關切換) 輸入頻率範圍 50Hz to 60Hz 最大輸出電流
Manual Asus TS100-E4 PI2
Summary
ii Copyright 2007© ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept ...
iii Contents Notices ................................................................................................viiSafety information ............................................................................. viiiAbout this guide .................................................................
iv Contents 3.2 Jumpers ..................................................................................... 3-53.3 Connectors .............................................................................. 3-10 3.3.1 Rear panel connectors .............................................. 3-103.3.2 Int...
v Contents 4.4.7 Onboard Devices Configuration ................................. 4-26 4.4.8 PCI PnP ...................................................................... 4-27 4.5 Power Configuration ................................................................. 4-28 4.5.1 APM Configuration ........
vi Contents 5.4 Global Array Manager ............................................................... 5-34 Chapter 6: Driver installation 6.1 RAID driver installation ............................................................... 6-2 6.1.1 Creating a RAID driver disk....................................
vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:• This device may not cause harmful interference, and• This device must accept any interference received including interference that may ca...
viii Safety information Electrical Safety • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. ...
ix About this guide Audience This user guide is intended for system integrators, and experienced users with at least basic knowledge of configuring a server. Contents This guide contains the following parts: 1. Chapter 1: Product Introduction This chapter describes the general features of the server...
x References Refer to the following sources for additional information, and for product and software updates. 1. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management utility. 2. ASUS websites The ASUS websites worldwide pro...
1- This chapter describes the general features of the barebone server, including sections on the front panel and rear panel specifications. Chapter 1 P ro d u ct i n tr o d u ct io n
Chapter 1: Product introduction 1-2 1.1 System package contents Check your ASUS TS100-E4/PI2 package with the items on the following table. The package contents vary for the following configurations: Contact your dealer immediately if any of the items is damaged or missing. Check your system package...
ASUS TS100-E4/PI2 1-3 1.2 System specifications The ASUS TS100-E4/PI2 is a server system featuring the ASUS P5M2-M/ C _ T S 1 0 0 - E 4 m o t h e r b o a r d . T h e s e r v e r s u p p o r t s t h e I n t e l ® X e o n ® 3000/3200 or Pentium ® D (D-stepping) series Processors, and includes the late...
ASUS TS100-E4/PI2 1-5 1.3 Front panel features The TS100-E4/PI2 chassis displays a black stylish front panel. The power button, LED indicators, optical, and floppy drives are located on the front panel. Flip the front panel I/O ports cover to access the front panel USB ports. F r o n t p a n e l I /...
Chapter 1: Product introduction 1-6 1.5 Rear panel features The rear panel includes a slot for the motherboard rear I/O ports, four full-length expansion slots, chassis cover locks, a vent for the system fan, and the power supply unit. 1.4 LED information The TS100-E4/PI2 comes with two LED indicato...
ASUS TS100-E4/PI2 1-7 1.6 Internal features The TS100-E4/PI2 chassis includes the basic components as shown. 1. Power supply2. Space for 9 cm system FAN3. ASUS P5M2-M/C_TS100-E4 4. CPU socket and CPU Cooler 5. DDR2 DIMM sockets6. PCI Express x8 slot (x4 Link)7. PCI Express x8 slot (x8 Link)8. 2 x PC...
2- T h i s c h a p t e r l i s t s t h e h a r d w a r e s e t u p procedures that you have to perform when installing or removing system components. Chapter 2 Hardware se tup
Chapter 2: Hardware setup 2-2 2.1 Removing the side cover To remove the side cover:1. Use a Philips screwdriver to remove the screw on the side cover.2. Locate the two side cover locks. 3. Move the side cover to the direction of the arrow. 4. Lift the side cover, then set aside. 4 4 3. P r e s s t h...
2-3 ASUS TS100-E4/PI2 Viewing the internal structure Without the side cover, the internal structure and installed components of the barebone server appear as shown in the following picture.Perform the procedures in the succeeding sections to install the CPU, system memory, disk drives, and expansion...
Chapter 2: Hardware setup 2-4 ® P5M2-M/C_TS100-E4 2.2 Motherboard information Place eight (8) screws into the holes indicated by circles to secure the motherboard to the chassis. Place this side towards the rear of the chassis Refer to "Chapter 3 Motherboard Information" for detailed Informa...
Chapter 2: Hardware setup 2-6 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forefinger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B). To prevent damage to the socket pins, do not remove the PnP c...
Chapter 2: Hardware setup 2-8 A A B B 3. Connect the CPU fan cable to the connectors on the motherboard labeled CPU_FAN1. Do not forget to connect the CPU fan connector to CPU_FAN1 ! Hardware monitoring errors can occur if you fail to plug this connector. 2. Fasten the screws in a diagonal sequence ...
2-11 ASUS TS100-E4/PI2 2.5 Installing a hard disk drive T h e s e r v e r s y s t e m s u p p o r t s o n e Serial ATA hard disk drive through a detachable hard disk drive cage. Hard disk drive cage You may purchase a second hard disk drive cage to install an additional HDD. Refer to the next chapte...
2-13 ASUS TS100-E4/PI2 3. Secure the HDD to the cage with two screws on both sides of the cage. 4. Reinstall the HDD cage to the chassis. Align the HDD cage and bay assembly rails, then carefully p u s h t h e H D D c a g e u n t i l i t i s flushed to the chassis. 5. Connect one end of the supplied...
Chapter 2: Hardware setup 2-14 Connect the 15-pin Serial ATA p o w e r p l u g t o t h e S e r i a l A T A power connector at the back of the drive. OR Use either the SATA power connector OR the legacy 4-pin power connector. DO NOT use both to prevent damage to components and to keep the system from...
2-19 ASUS TS100-E4/PI2 2.7 Installing expansion cards The system comes with two PCI slots, one PCI Express x8 (x8 link) slot, and one PCI Express x1 (x4 link) slot. Make sure to unplug the power supply before installing or removing an expansion card(s). Failure to do so may cause severe damage to bo...
Chapter 2: Hardware setup 2-20 8. Finally, use the screwdriver secure t h e s c r e w t h a t y o u r e m o v e d earlier. 7. T h e n i n s t a l l t h e h o o k m e t a l bracket under all slots of metal bracket.
2-21 ASUS TS100-E4/PI2 To install a floppy disk drive: 1. Insert the drive to the bay until it is flushed to the chassis front panel. 2. Align the FDD screw hole with the drive bay lock pin. 2.8 Removing components You may need to remove previously installed system components when installing or remo...
2-23 ASUS TS100-E4/PI2 2.9 Connecting cables The TS100-E4/PI2 chassis includes the power and signal cables that you need to connect to the motherboard, storage drives, and other devices that you intend to install. Most of the cables for the chassis kit are already connected upon shipment. When insta...
Chapter 2: Hardware setup 2-24 1. Match the side cover hooks to the chassis rail on the side of the chassis. 2. Fit the side cover the cover toward the chassis until it fits. 3. Slide the cover toward the front until it snaps in place. 2.10 Replacing the side cover After installing all components an...
This chapter gives inforamtion about the motherboard that comes with the server. This chapter includes the motherboard layout, jumper settings, and connector locations. Chapter 3 Motherboa rd Info
3-2 Chapter 3: Motherboard Information 3.1 Motherboard overview P5M2-M/C_TS100-E4 24.5cm (9.6in) 24.5cm (9.6in) ATXPWR1 P5M2-M/C_TS100-E4 LGA775ll CPU_FAN1 CPU_FAN2 REAR_FAN 1 REAR_FAN2 FRNT_FAN2 ATX12V1 DDRV 1 FM_FRNT1 USB34 USBPW34 SATA1SATA2SATA3SATA4 8Mbit Flash BIOS AUX_PANEL 1 HDLED 1 PRI_IDE1...
ASUS TS100-E4/PI2 3-3 Layout contents R e a r p a n e l c o n n e c t o r s P a g e 1. PS/2 mouse port (green) 3-10 2. Parallel port 3-10 3. Gigabit LAN1 (RJ-45) port 3-10 4. VGA port 3-10 5. Serial (COM1) port 3-10 6. USB 2.0 ports 1 and 2 3-10 7. PS/2 keyboard port (purple) 3-10 S l o t s / S o c ...
3-8 Chapter 3: Motherboard Information 6. Gigabit LAN controller setting [3-pin LAN_EN1) These jumpers allow you to enable or disable the onboard Broadcom ® BCM5721 Gigabit LAN1 controller. Set to pins 1-2 to activate the Gigabit LAN controller. 7. RAID controller selection (3-pin RAID_SEL1) This ju...
ASUS TS100-E4/PI2 3-9 8. Force BIOS recovery setting (3-pin RECOVERY1) This jumper allows you to quickly update or recover the BIOS when it gets corrupted.To update the BIOS: 1. Prepare a floppy disk that contains the latest BIOS for the mother - board (xxxx-xxx.ROM) and the AFUDOS.EXE utility. 2. S...
3-10 Chapter 3: Motherboard Information 3.3 Connectors 3.3.1 Rear panel connectors 1 5 6 4 3 7 2 1. PS/2 mouse port (green). This port is for a PS/2 mouse.2. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. 3. Gigabit LAN1 (RJ-45) port. This ports allow Gigab...
ASUS TS100-E4/PI2 3-11 3.3.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY1) This connector is for the provided Floppy Disk Drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk...
3-12 Chapter 3: Motherboard Information 2. ICH7R primary IDE connector (40-1 pin PRI_IDE1) This connector is for an Ultra DMA 100/66 signal cable. The Ultra DMA 100/66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra...
3-14 Chapter 3: Motherboard Information 4. Hard disk activity LED connector (4-pin HDLED1) This connector supplies power to the hard disk activity LED. The read or write activities of any device connected to the SCSI connectors or the SATA connectors cause this LED to light up. 5. USB connector (10-...
3-16 Chapter 3: Motherboard Information 8. Backplane SMBus connector (6-1 pin BPSMB1) This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. P5M2-M/C_TS100-E 4 ® P5M2-M/C_TS100-E4 SMBus ...
3-18 Chapter 3: Motherboard Information 11. Auxiliary panel connector (20-pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs.• Front panel SMB (6-1 pin FPSMB) These leads connect the front panel SMB...
This chapter tells how to change the system settings through the BIOS Setup menus. Detailed de- scriptions of the BIOS parameters are also provided. Chapter 4 BIOS Setup
4-2 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup.1. ASUS AFUDOS (Updates the BIOS in DOS mode using a bootable floppy disk.) 2. ASUS CrashFree BIOS 2 (Updates the BIOS using a b...
ASUS TS100-E4/PI2 4-3 4.1.2 AFUDOS utility The AFUDOS utility allows you to update the BIOS file in DOS environment using a bootable floppy disk with the updated BIOS file. This utility also al - lows you to copy the current BIOS file that you can use as backup when the BIOS fails or gets corrupted ...
4-4 Chapter 4: BIOS setup 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support CD to the bootable floppy disk you created earlier. 3. Boot the system in DOS mode, then at the prompt type: afudos /i[filename] where [filename] is the latest or the original BIOS file on the bootable flo...
ASUS TS100-E4/PI2 4-5 5. The utility returns to the DOS prompt after the BIOS update process is completed. Reboot the system from the hard disk drive. A:\>afudos /iTS100-E4.ROMAMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))Copyright (C) 2002 American Megatrends, Inc. All rights...
4-6 Chapter 4: BIOS setup 4.1.3 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard sup - port CD or the flopp...
ASUS TS100-E4/PI2 4-7 Recovering the BIOS from the support CD To recover the BIOS from the support CD: 1. Remove any floppy disk from the floppy disk drive, then turn on the system. 2. Insert the support CD to the optical drive.3. The utility displays the following message and automatically checks t...
4-8 Chapter 4: BIOS setup Installing ASUS Update To install ASUS Update:1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update VX.XX.XX. 3. The ASUS Update utility is copied to your system. 4.1.4 ASUS Update utility The ASUS...
ASUS TS100-E4/PI2 4-9 3. Select the ASUS FTP site near- est you to avoid network traffic, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet:1. Launch the ASUS Update utility from the Windows ® desktop by click- ing Start > Programs &g...
4-10 Chapter 4: BIOS setup Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. Launch the ASUS Update utility from the Windows ® desktop by click- ing Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIO...
ASUS TS100-E4/PI2 4-11 4.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section “4.1 Manag- ing and updating your BIOS.”Use the BIOS Setup program when you are installing a motherboard, re- configurin...
4-12 Chapter 4: BIOS setup 4.2.2 Menu bar The menu bar on top of the screen has the following main items:Main For changing the basic system configuration Advanced For changing the advanced system settings Power For changing the Advanced Power Management (APM) configuration Boot For changing the syst...
4-14 Chapter 4: BIOS setup 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. ...
ASUS TS100-E4/PI2 4-15 4.3.4 Primary, Third, Fourth IDE Master/Slave The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device. Select a device item, then press <Enter> to display the IDE device information. Select Screen Select Item +- Change O...
4-16 Chapter 4: BIOS setup PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWD - MA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monito...
4-18 Chapter 4: BIOS setup 4.3.6 System Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto‑detected CPU specification. System Memory...
ASUS TS100-E4/PI2 4-19 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Select Screen Select Item +- Change ...
4-20 Chapter 4: BIOS setup Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Advanced Select MPS Revision. MPS Configuration MPS Revision [1.4] 4.4.2 MPS Configuration MPS Revision [1.4] A...
ASUS TS100-E4/PI2 4-21 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Advanced Select Remote Access type. Configure Remote Access type and parameters Remote Access [Enabled] Serial port...
ASUS TS100-E4/PI2 4-23 4.4.5 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Sets the ratio between CPU Core Clock and the FSB Frequency. NOTE: If an i...
4-24 Chapter 4: BIOS setup DRAM Frequency [Auto] Allows you to set the DDR operating frequency. Configuration options: [Auto] [533 MHz] [667 MHz] Configure DRAM Timing by SPD [Enabled] When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). W...
ASUS TS100-E4/PI2 4-25 Disable this item if you are using RedHat Linux Advanced Server 3.0 UP5/UP6 operating system. DRAM Write Recovery Time [4 Clocks] Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] Onboard LAN Boot ROM [Enabled] Allows you to enable or disable the option ROM in...
ASUS TS100-E4/PI2 4-27 4.4.8 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices. Take caution when cha...
4-28 Chapter 4: BIOS setup 4.5 Power Configuration The Power Configuration menu items allow you to change the settings for the ACPI and Advanced Power Management (APM) features. Select an item then press <Enter> to display the configuration options. ACPI APIC Support [Enabled] Allows you to en...
4-30 Chapter 4: BIOS setup 4.5.2 Hardware Monitor Hardware Monitor CPU Temperature [49ºC/120ºF] MB1 Temperature [47ºC/114ºF] MB2 Temperature [47ºC/114ºF] CPU Fan1 Speed [3884RPM] CPU Fan2 Speed [N/A] Front Fan1 Speed [N/A] Front Fan2 Speed [N/A] Rear Fan1 Speed [N/A] Rear Fan2 Speed [N/A] Smart Fan ...
ASUS TS100-E4/PI2 4-31 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Boot Settings Boot Device Priority Hard Disk Drives Boot Settings Configuration Security Select Screen Select Item +- Change Option F...
ASUS TS100-E4/PI2 4-33 4.6.3 Boot Settings Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS SETUP UTILITY Boot Allows BIOS to skip certain tests while booting. This will decrease the time...
4-34 Chapter 4: BIOS setup Hit ‘DEL’ Message Display [Enabled] When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled] Interrupt 19 Capture [Enabled] When set to [Enabled], this function allows the option ROMs to trap Int...
ASUS TS100-E4/PI2 4-35 If you forget your BIOS password, you can clear clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for infor- mation on how to erase the RTC RAM. To clear the supervisor password, select the Change Supervisor Password then press <Enter>. Th...
4-36 Chapter 4: BIOS setup 3. Confirm the password when prompted. The message “Password Installed” appears after you set your password successfully. To change the user password, follow the same steps as in setting a user password. Clear User Password Select this item to clear the user password. Pass...
ASUS TS100-E4/PI2 4-37 4.7 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Exit system setup after savi...
4-38 Chapter 4: BIOS setup When a confirmation window appears, select [OK] then press <Enter> to discard the changes, and load the previously saved settings. If you wish to cancel the command, select [Cancel] then press <Enter> to return to the Exit menu. Load Setup Defaults Select this ...
This chapter provides instructions for setting up, creating and configuring RAID sets using the available utilities. Chapter 5 RAID Configuration
5-2 Chapter 5: RAID Configuration 5.1 RAID configurations The server system/motherboard comes with the Intel ® ICH7R and the LSI Logic Embedded SATA RAID technology built-in the Intel ® ICH7R SouthBridge chipset that allows you to configure IDE and Serial ATA hard disk drives as RAID sets. The mothe...
5-4 Chapter 5: RAID Configuration 5.2 Intel ® Matrix Storage Manager Option ROM Utility The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID 0 or RAID 1 from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.To enter t...
ASUS TS100-E4/PI2 5-5 5.2.1 Creating a RAID 0 set (striped) To create a RAID 0 set:1. From the utility main menu, select 1. Create RAID Volume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 0 set, then press <Enter>.3. When the RAID Level item is highlighted, pres...
5-6 Chapter 5: RAID Configuration 6. Use the up/down arrow key to select the stripe size for the RAID 0 array, then press <Enter>. The available stripe size values range from 8 KB to 128 KB. The default stripe size is 128 KB. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you w...
ASUS TS100-E4/PI2 5-7 5.2.2 Creating a RAID 1 set (mirrored) To create a RAID 1 set:1. From the utility main menu, select 1. Create RAID Volume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 1 set, then press <Enter>.3. When the RAID Level item is highlighted, pre...
5-8 Chapter 5: RAID Configuration 5.2.3 Deleting a RAID set 2. Use the up/down arrow key to select the RAID set you want to delete, then press <Del>. This window appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Rese...
ASUS TS100-E4/PI2 5-9 5.2.5 Exiting the Intel ® Matrix Storage Manager utility To exit the utility:1. From the utility main menu, select 4. Exit, then press <Enter>. This window appears. Are you sure you want to exit? (Y/N): [ CONFIRM EXIT ] 2. Press <Y> to exit or press <N> to ret...
5-10 Chapter 5: RAID Configuration 5.2.6 Rebuilding the RAID This option is only for the RAID 1, RAID 5 and RAID 10 sets. Rebuilding the RAID with other non-RAID disk If any of the SATA hard disk drives included in the RAID array failed, the sys- tem displays the status of the RAID volume as “Degrad...
ASUS TS100-E4/PI2 5-11 4. Exit the RAID configuration utility and reboot the system. 5. Select Start > Programs > Intel Matrix Storage > Intel Matrix Storage Console or click the Intel Matrix Storage Manager tray icon to load the Intel Matrix Stroage Manager utility. 6. From the View menu, ...
5-12 Chapter 5: RAID Configuration 5.3 LSI Logic Embedded SATA RAID Set- up Utility The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0 or RAID 1 set(s) from SATA hard disk drives connected to the SATA connec- tors supported by the motherboard Southbridge chip. You may also cr...
5-14 Chapter 5: RAID Configuration Using Easy Configuration To create a RAID set using the Easy Configuration option: 1. From the utility main menu, highlight Configure , then press <Enter>. 2. Use the arrow keys to select Easy Configuration , then press <Enter>. 3. The ARRAY SELECTION M...
5-16 Chapter 5: RAID Configuration 6. Select RAID from the Logical Drive menu, then press <Enter>.7. Select the RAID level from the menu, then press <Enter>. You need at least two identical hard disk drives when creating a RAID 1 set. 8. When creating a RAID 1 set, select Stripe Size fro...
5-18 Chapter 5: RAID Configuration When a RAID set is already existing, using the New Configuration com- mand erases the existing RAID configuration data. If you do not want to delete the existing RAID set, use the View/Add Configuration command to view or create another RAID configuration. 3. Follo...
ASUS TS100-E4/PI2 5-19 5.3.2 Adding or viewing a RAID configuration You can add a new RAID configuration or view an existing configuration using the View/Add Configuration command. Adding a new RAID configuration To add a new RAID configuration: 1. From the Management Menu, highlight Configure , the...
5-20 Chapter 5: RAID Configuration 4. Select all the drives required for the RAID set, then press <Enter>. The configurable array appears on screen. 5. Press <F10>, select the configurable array, then press <SpaceBar>. The logical drive information appears including a Logical Drive...
5-22 Chapter 5: RAID Configuration 5.3.3 Initializing the logical drives After creating the RAID set(s), you must initialize the logical drives. You may initialize the logical drives of a RAID set(s) using the Initialize or Objects com- mand in the Management Menu. Using the Initialize command To in...
ASUS TS100-E4/PI2 5-23 3. When prompted, press the <SpaceBar> to select Yes from the Initialize? dialog box, then press <Enter>. You may also press <F10> to initialize the drive without confirmation. Initializing a logical drive(s) erases all data on the drive. 4. A progress bar ap...
5-24 Chapter 5: RAID Configuration 5. When initialization is completed, press <Esc>. Using the Objects command To initialize the logical drives using the Objects command: 1. From the Management Menu, highlight Objects, then press <Enter>.
ASUS TS100-E4/PI2 5-27 5.3.4 Rebuilding failed drives You can manually rebuild failed hard disk drives using the Rebuild or Objects command in the Management Menu. Using the Rebuild command To rebuild a failed hard disk drive using the Rebuild command:1. From the Management Menu, highlight Rebuild, ...
5-28 Chapter 5: RAID Configuration 3. After selecting the drive to rebuild, press <F10>. The indicator for the selected drive now shows RBLD. 4. When prompted, press <Y> to to rebuild the drive. 5. When rebuild is complete, press any key to continue. Using the Objects command To rebuild ...
ASUS TS100-E4/PI2 5-29 5.3.5 Checking the drives for data consistency You can check and verify the accuracy of data redundancy in the selected logical drive. The utility can automatically detect and/or detect and correct any differences in data redundancy depending on the selected option in the Obje...
5-30 Chapter 5: RAID Configuration 3. When prompted, press the <SpaceBar> to select Yes from the Consis- tency Check dialog box, then press <Enter>. You may also press <F10> to check the drive consistency. A progress bar appears on screen. 4. While checking the disk consistency, pr...
5-32 Chapter 5: RAID Configuration 5.3.6 Deleting a RAID configuration To delete a RAID configuration: 1. From the Management Menu, select Configure > Clear Configuration , then press <Enter>. 2. When prompted, press the <SpaceBar> to select Yes from the Clear Configuration? dialog bo...
ASUS TS100-E4/PI2 5-33 5.3.7 Selecting the boot drive from a RAID set You must have created a new RAID configuration before you can select the boot drive from a RAID set. Refer to the Creating a RAID set: Using New Configuration section for details. To select the boot drive from a RAID set:1. From t...
5-34 Chapter 5: RAID Configuration 5.3.8 Enabling the WriteCache You may enable the RAID controller’s WriteCache option to improve the data transmission performance. 3. When finished, press any key to continue. 5.4 Global Array Manager You may also create a RAID set(s) in Windows ® operating environ...
This chapter provides instructions for installing the necessary drivers for different system components. Chapter 6 Driver installation
6-2 Chapter 6: Driver installation 6.1 RAID driver installation After creating the RAID sets for your server system, you are now ready to install an operating system to the independent hard disk drive or bootable array. This part provides instructions on how to install the RAID controller drivers du...
ASUS TS100-E4/PI2 6-3 6.1.2 Installing the RAID controller driver Windows ® 2003 Server OS During Windows ® 2003 Server OS installation To install the RAID controller driver when installing Windows ® 2000/2003 Server OS: 1. Boot the computer using the Windows ® 2003 Server installation CD. The Windo...
6-4 Chapter 6: Driver installation 4. Insert the RAID driver disk you created earlier to the floppy disk drive, then press <Enter>. 5. Select the RAID controller driver from the list, then press <Enter>. L S I L o g i c S A T A R A I D Select “LSI Logic Embedded SATA RAID” for 32bit Wind...
ASUS TS100-E4/PI2 6-5 Intel Matrix Storage Select “Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7RDH)” for Intel Matrix Storage RAID mode from the list, then press <Enter>. If you configured SATA as AHCI Mode in the BIOS setup utility of IDE Configuration, first install the Intel SATA ...
6-6 Chapter 6: Driver installation 5. Right-click the RAID controller item, then select Properties.6. Click the Driver tab, then click the Update Driver button.7. The Upgrade Device Driver Wizard window appears. Click Next. 8. Insert the RAID driver disk you created earlier to the floppy disk drive....
6-8 Chapter 6: Driver installation Red Hat ® Enterprise ver. 3.0 To install the Intel ® ICH7R LSI Logic Embedded SATA RAID controller driver when installing Red Hat ® Enterprise ver. 3.0 operating system: 1. Boot the system from the Red Hat ® Installation CD. 2. At the boot: , type linux dd , then p...
ASUS TS100-E4/PI2 6-9 4. Select fd0 using the <Tab> key when asked to select the driver disk source. Press <Tab> to move the cursor to OK, then press <Enter>. 3. Select Yes using the <Tab> key when asked if you have the driver disk. Press <Enter>
6-10 Chapter 6: Driver installation 6. When asked if you will load additional RAID controller drivers, select Yes, then install the additional RAID controller drivers. 7. Follow screen instructions to continue the OS installation. 5. When prompted, insert the Red Hat ® Enterprise ver. 3.0 RAID drive...
ASUS TS100-E4/PI2 6-11 SuSE Linux To install the RAID controller driver when installing SuSE Linux OS:1. Boot the system from the SuSE Installation CD.2. Select Installation from the Boot Options menu, then press <Enter>. 3. A message instructs you to prepare the RAID driver disk. Press <F6...
6-12 Chapter 6: Driver installation 4. When prompted, insert the RAID driver disk to the floppy disk drive, then press <Enter>. 5. When prompted, select the floppy disk drive (fd0) as the driver update medium, select OK, then press <Enter>. The drivers for the RAID controller are install...
ASUS TS100-E4/PI2 6-13 6.2 LAN driver installation This section provides instructions on how to install the Broadcom ® Gigabit LAN controller drivers. 6.2.1 Windows ® 2003 Server To install the Broadcom ® Gigabit LAN controller driver on a Windows ® 2003 Server OS:1. Restart the computer, then log o...
6-14 Chapter 6: Driver installation 6.2.2 Red Hat ® Enterprise ver. 3.0 Follow these instructions when installing the Broadcom ® Gigabit LAN control- ler base driver for the Red Hat ® Enterprise ver. 3.0 operating system. Building the driver from the TAR file 4. Click Next when the InstallShield Wiz...
ASUS TS100-E4/PI2 6-15 6.3 VGA driver installation This section provides instructions on how to install the XGI Graphics driver. 6.3.1 Windows ® 2003 Server The Windows ® 2003 Server operating system automatically recognizes the XGI Graphics driver during system installation. There is no need to ins...
6-16 Chapter 6: Driver installation 6.4 Management applications and utilities installation The support CD that came with the motherboard package contains the driv- ers, management applications, and utilities that you can install to avail all motherboard features. The contents of the support CD are s...
The Appendix describes the CPU features that the motherboard supports. Appendix Reference Info
A-2 Appendix: CPU features A.1 Intel ® EM64T Using the Intel ® EM64T feature To use the Intel ® EM64T feature: 1. Install an Intel ® Pentium ® 4 CPU that supports the Intel ® EM64T. 2. Install a 64-bit operating system (Windows ® XP Professional x64 Edi- tion). 3. Install the 64-bit drivers for the ...
ASUS TS100-E4/PI2 A-3 A.2.2 Using the EIST To use the EIST feature:1. Turn on the computer, then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Configuration, then press <Enter>. 3. Set the Intel(R) SpeedStep Technology item to [Automatic], then press <Enter>. See page 5...
ASUS TS100-E4/PI2 A-5 A.4 670 W single power supply A.4.1 General description The 250W single power supply with ATX-compliant output cables and con- nectors. The power supply has 8 plugs labeled P1 to P8. Take note of the devices to which you should connect the plugs. P2 P5 P6 P1 P7 P1 Motherboard 2...
A-6 Appendix: CPU features A.4.2 Specifications DC Output characteristics Input Characteristics Input Voltage Range 115V~/6A or 230V~/3A, (By Voltage Switch selection) Input Frequency Range 50 Hz to 60 Hz Output Voltage Max (A) +3.3V 16A +5V 18A +12V1 10A +12V2 14A -12V 0.3A +5VSB 2.5A +5V&3.3V ...
Asus Manuals
-
Asus 1001P-MU17-WT
User Manual
-
Asus 1001P-MU17-WT
Manual
-
Asus 1 E1309
User Manual
-
Asus 1 E1309
Manual
-
Asus 1015E
User Manual
-
Asus 1064E - PIKE Storage Controller SAS
User Manual
-
Asus 136-480A
User Manual
-
Asus 136-480A
Manual
-
Asus 1225 Series
User Manual
-
Asus 13VH192C
Manual
-
Asus 136-485A
User Manual
-
Asus 136-485A
Manual
-
Asus 1U
User Manual
-
Asus 1U Rackmount Barebone Server RS120-E3 (PA4)
User Manual
-
Asus 1U Rackmount Barebone Server RS160-E3/PS4
User Manual
-
Asus 200/266 MHZ FSB AGP 4X
User Manual
-
Asus 200/266 MHZ FSB AGP 4X
Manual
-
Asus 1U Rackmount Chassis Kit R10-A2P4
User Manual
-
Asus 24T1E
User Manual
-
Asus 22T1E
User Manual