Asus S62- Manuals

service overview 1 - 5 LCD bracket L C D B R A C K E T S The illustration below shows the LCD brackets. Hinge Cover H I N G E C O V E R The illustration below shows the Hinge Cover. LCD Case L C D C A S E The illustration below shows the LCD case. Here is the LCD bezel.

service overview 1 - 6 Keyboard K E Y B O A R D The illustration below shows the keyboard plate. It can be exchanged with keyboard plates with different language layouts, such as U.S., German, Russian, British, Italian and others. Top Case Module T O P C A S E The illustration below shows the top ca...

service overview 1 - 7 Optical Drive Device O P T I C A L The illustration below shows the Optical Drive Device D R I V E D E V I C E Hard Disk Drive H D D The illustration below shows the 2.5” industry-standard HDD with 9.5mm height. HDD Bracket H D D B R A C K E T The illustration below shows the ...

service overview 1 - 8 CPU Thermal Module C P U The illustration below shows the thermal module for the CPU. It’s located on the top of CPU. T H E R M A L M O D U L E Memory Module M E M O R Y The illustration below shows the industry-standard 200pin SO-DIMM DDR SDRAM module for the notebook. Mother...

service overview 1 - 9 Modem Module M O D E M The illustration below shows the modem module of the notebook. M O D U L E WALN Module W A L N The illustration below shows the WALN module of the notebook. M O D U L E Top Case T O P C A S E The illustration below shows the TOP case of the notebook.

service overview 1 - 10 Service Overview Please pay special attention to the cautions below to prevent any damages to the notebook and also please be sure to select the appropriate tools described in this section to perform any services desired. Precautions C A U T I O N S Before you perform any ser...

service overview 1 - 11 Appropriate Tools T O O L S The illustrations below show the appropriate tools that should be used for the notebook’s service and repair. Phillips-head Screwdriver C R O S S S C R E W - Use a Phillips-head screwdriver to fasten/remove the K- or B-typed screws. D R I V E R Sin...

Disassembly procedure Chapter 2 Disassembly Procedure Please follow the information provided in this section to perform the complete disassembly procedure of the notebook. Be sure to use proper tools described before. SUS S62 Series Notebook consists of various modules. This chapter describes the pr...

Disassembly procedure Battery Module B A T T E R Y B A T T E R Y M O D U L E R E M O V A L The illustration below shows how to remove the battery module. 1. Unlock and hold the latch No (1). 1 2. Slide the battery lock (No.2) and pull the battery pack out. 2 3. Pull the battery pack out. 2 - 2

Disassembly procedure HDD Module H D D M O D U L E The illustrations below show how to remove the HDD module from the notebook. Removing HDD Module H D D M O D U L E R E M O V A L 1. Remove 3 screws (M2.5*4L (K)), then remove the HDD door. M2.5*4L 2. Lift the HDD module and then remove it. 3. Remove...

Disassembly procedure Wireless LAN Module W I R E L E S S L A N The illustration below shows how to remove the Wireless LAN module. 1. Remove 1 piece of tape and disconnect the MAIN & AUX antenna. 2. And open the two latches to pop the MINI PCI MODULE up then pull it out. Memory Module M E M O R...

Disassembly procedure 2. Open the 2 latches aside (No. 1, 2), which will pop the memory module up to an angle of 30 ° , then pull out the memory module in that angle (No. 3). 1 3 2 30 o CPU Module C P U M O D U L E The illustrations below show how to remove the CPU module from the notebook. Removing...

Disassembly procedure 3. Disconnect the Fan cable and remove 2 screws (M2.5*4L (K)) then take away the CPU thermal module. 4. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the CPU. 5. Squeeze the vacuum handling pump and use it to lift the CPU away. M2.5*4L Unlock L O 2 -...

Disassembly procedure ODD Module O P T I C A L D R I V E D E V I C E The illustration below shows how to remove the ODD module. 1. Remove 1 screw (M2.5*4L (K)). O D D R E M O V A L M2.5*4L 2. Push the ODD Module out by a pair of tweezers. 2 - 7

Disassembly procedure Keyboard K E Y B O A R D The illustration of below shows how to remove the keyboard. Removing Keyboard K / B R E M O V A L 1. Push the 4 latches in (No.1, No.2, No.3, No.4) with a pair of tweezers or a single-slotted screwdriver and lift the keyboard plate up. 2. Lay the keyboa...

Disassembly procedure Removing Keyboard Cable C A B L E 1. Use a flexible connector tool to unlock the cable connector on both ends (no. 1). R E M O V A L 2. Carefully pull out the keyboard cable (no. 2) with a pair of tweezers. 3. Lock the connector (no. 3) again to avoid possible breakage. 1. Unlo...

Disassembly procedure 2. Use a pair of tweezers to remove both hinge Cover. 3. Disconnect the LANCH cable and touchpad FFC on the top case. LANCH cable Touchpad FFC 4. Turn over the NB and remove 1 screws (M2*3L (K)). I M2*3L 2 - 10

Disassembly procedure 5. Disconnect the Coaxial & inverter cable. Coaxial cable Inverter cable 6. Arrange the Coaxial & inverter cable and antenna on the bottom case. B O T T O M C A S E R E M O V A L 7. Remove 15 screws (M2.5*6L (K)) and 1 screw (M2.5*4L) (K)) on the bottom case. M2.5*6L M2...

Disassembly procedure 8. Before separate the bottom case, remove a little bit bottom case and let the cable and antennas through out of hole . Inverter & camera cable Antenna 9. Separate the bottom case from the top case. 10. Remove 2 screws (M2.5*6L (K)) on both hinge. M2.5*6L 2 - 12

Disassembly procedure Motherboard M O T H E R B O A R D The illustrations below show how to disassemble and remove the Motherboard. Removing Motherboard M O T H E R B O A R D R E M O V A L 1. Remove 2 screws (M2.5*4L (K)). 2. Remove 2 screws for CRT on the right side by a spacer screwdriver. 3. Sepa...

Disassembly procedure 4. Disconnect the Bluetooth & Speaker cables then take away the Motherboard. 5. Remove 1 screw (M2*3L (K)) on the IO bracket. 6. Use a single-slotted screwdriver to remove 2 screws HEX 5mm then take away the IO bracket. Bluetooth cable Speaker cable M2*3L 2 - 16

Disassembly procedure Bottom Case Module B O T T O M The illustrations below show how to remove and disassemble the Bottom case module. The module contains Bluetooth board, speaker cable. C A S E M O D U L E Disassembling Bottom case Module B O T T O M C A S E D I S A S S E M B L Y 1. Disconnect the...

Disassembly procedure LCD Module L C D M O D U L E The illustrations below show how to remove and disassemble the LCD module. The module contains LCD panel, Inverter board, LCD bezel, LCD back cover. L C D M O D U L E D I S A S S E M B L Y Disassembling LCD Module 4. Remove 7 rubber pads and 7 screw...

Disassembly procedure 7. Disconnect the camera cable and remove the microphone. 8. Remove the cable and remove mylar then take away the cable. 9. Take away the Camera module from the LCD back cover. 10. Remove 1 screw (M2x 4L) and remove 3 pieces of tapes then take away the wireless black wire. 2 - ...

Disassembly procedure 11. Remove 1 screw (M2x 4L) and remove 3 pieces of tapes then take away the wireless white wire. 2 - 24

Assembly procedure Chapter 3 Assembly Procedure Please follow the information provided in this section to perform the complete assembly procedure of the notebook. Be sure to use proper tools described before. fter you have completed the previous chapter of complete disassembly, please follow this ch...

Assembly procedure LCD Module L C D M O D U L E The illustrations below show how to assemble and install the LCD module of the notebook. 1. Install the wireless white wire module and secure 1 screw (M2x 4L) then paste 3 pieces of tapes to secure it. L C D M O D U L E A S S E M B L Y 2. Install the w...

Assembly procedure Assembly LCD Module 1. Connect the coaxial cable and paste 2 pieces of tapes to secure it. 2. Install the left LCD bracket and secure 4 screws (M2*3L (K)) to fix it. 3. Install the right LCD bracket and 4 screws(M2*3L(K)) and secure 4 screws (M2*3L (K)) to fix it. M2*3L M2*3L 3 - ...

Assembly procedure 4. Install the LCD panel and secure 2 screws (M2.5*4L (K)) & 4 screws (M2.5*6L (K)) to secure it. M2.5*4L M2.5*6L 5. Connect the LCD cable. 6. Combine the LCD bezel and LCD Cover properly and press on all four edges until them snap into position. 3 - 6

Assembly procedure 7. Secure74 screws (M2.5 x 6L) on LCD front bezel then paste 7 rubber pads above. M2.5*6L Bottom Case Module B O T T O M C A S E M O D U L E The illustrations below show how to assembly the Bottom case module. The module contains Bluetooth board, speaker cable. Assembling Bottom c...

Assembly procedure 9. Secure 2 screws (M2.5*4L (K)) to secure the motherboard. Top Case Module T O P C A S E M O D U L E The illustrations below show how to assemble and install the top case module of the notebook. 1. Install the touchpad on the top case. T O P C A S E A S S E M B L Y 2. Install the...

Assembly procedure Assembling Keyboard K E Y B O A R D The illustrations below show how to assemble and install the Keyboard of the notebook. K E Y B O A R D A S S E M B L Y 1. Place the Keyboard module on front side of the top case. Then connect Keyboard FPC Cable with a pair of tweezers. 2. Instal...

Assembly procedure ODD Module O D D M O D U L E The illustrations below show how to assemble and install the ODD Module of the notebook. 1. Insert the ODD module. O D D M O D U L E I N S T A L L A T I O N 2. Secure 1 screw (M2.5*4L (K)) to secure it. M2.5*4L CPU Module Assembly C P U M O D U L E The...

Assembly procedure 2. Turn the non-removable screw here 180 degrees clockwise to lock the CPU. 3. Install the CPU thernal module gently and connect the fan cable then secure 2 screws (M2.5*4L (K)) to secure it. 4. Secure 4 screws (M2*3L (K)) by order. 5. Install the CPU door and secure 2 screws (M2....

Assembly procedure Assembling Memory Module The illustrations below show how to assemble and install the memory module to the notebook . M E M O R Y M O D U L E 1. Insert the Memory module into the memory socket by an angle of 30 degree, and push down to latch the memory module. M E M O R Y I N S T ...

Upgrade & Replacement 4 – 1 Chapter 4 Upgrade & Replacement Follow the individual procedures in this chapter to perform the notebook’s upgrade and replacement of various major components. sus S62 Series Notebook is a 2 spindles product, which means there are less options for you to upgrade t...

Upgrade & Replacement 4 - 2 CPU Upgrade C P U The S62 Series Notebook comes standard with a Intel® Micro-FCPGA Socket on the motherboard, which means it can support all Intel Micro-FCPGA CPUs up to 2.13 GHz . Upgrading CPU Remove battery module 1. Unlock and hold the latch No (1). 1 2. Slide the...

Upgrade & Replacement 4 - 3 Removing CPU Module C P U R E M O V A L 1. Remove 2 screws (M2.5*4L (K)), then remove the CPU door. 2. Remove 4 screws (M2*3L (K)) by order. 1 2 3 4 M2.5*4L M2*3L 3. Disconnect the Fan cable and remove 2 screws (M2.5*4L (K)) then take away the CPU thermal module. M2.5...

Upgrade & Replacement 4 - 4 4. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the CPU. 5. Squeeze the vacuum handling pump and use it to lift the CPU away. Installing CPU The illustration below shows how to install CPU and the heat sink of the notebook. 1. Squeeze the ...

Upgrade & Replacement 4 - 5 3. Install the CPU thermal module gently and connect the fan cable then secure 2 screws (M2.5*4L (K)) to secure it. M2.5*4L 4. Secure 4 screws (M2*3L (K)) by order. 1 2 3 4 M2*3L 5. Install the CPU door and secure 2 screws (M2.5*4L (K)) to secure it. M2.5*4L Install b...

Upgrade & Replacement 4 - 6 Second Memory Upgrade M E M O R Y The S62 Series Notebook does not have RAM onboard. There are two SO-DIMM sockets for installing SO-DIMM RAM. It can upgrade the total memory size up to 1GB with a 512MB module on each socket. Upgrading Memory Module Remove battery mod...

Upgrade & Replacement 4 - 7 Removing Memory module M E M O R Y R E M O V A L 1. Remove 2 screws (M2.5*4L (K)), then remove the DIMM door. M2.5*4L 2. Open the 2 latches aside (No. 1, 2), which will pop the memory module up to an angle of 30 ° , then pull out the memory module in that angle (No. 3...

Upgrade & Replacement 4 - 9 HDD Upgrade H D D The S62 Series Notebook uses an industry-standard 2½” HDD with IDE interface. You can replace the HDD to any capacity of your choice within our approval and prior test. Upgrading HDD Remove battery module 1. Unlock and hold the latch No (1). 1 2. Sli...

Upgrade & Replacement 4 - 11 Installing new HDD module 4. Secure 4 screws [M3 * 4(L)] to fix HDD into HDD housing. H D D I N S T A L L A T I O N M3*4L 5. Insert the HDD module to connect the FPC connector until it’s installed properly. 6. Install the bottom case and secure 3 screws (M2.5*4L(K)) ...

Upgrade & Replacement 4 - 12 Wireless LAN Module W I R E L E S S The illustration below shows how to remove the Wireless LAN module. L A N Replacing WLAN Remove battery module W A L N 1. Unlock and hold the latch No (1). R E M O V A L 1 2. Slide the battery lock (No.2) and pull the battery pack ...

Upgrade & Replacement 4 - 13 Removing WALN Module 1. Remove 1 piece of tape and disconnect the MAIN & AUX antenna. O D D R E M O V A L 2. And open the two latches to pop the MINI PCI MODULE up then pull it out. Installing new WALN module W A L N M O D U L E I N S T A L L A T I O N 3. Install...

Upgrade & Replacement 4 - 14 4. Connect the MAIN & AUX antenna and paste 1 piece of tape to secure antennas. Install battery module 1. Install the battery module. Slide the battery latch to close the battery lock. B A T T E R Y I N S T A L L A T I O N

Upgrade & Replacement 4 - 15 ODD Replacement O D D The S62 Series Notebook can support DVD-ROM (8x DVD), COMBO (CD-R 24x/ CD-RW 24x / DVD-ROM 8x/ CD 24x), and DVD-Dual (DVD-R/RW: 4x/2x, DVD+R/RW: 4x/2.4x, CD-R/RW: 24x/ 10x, DVD: 8x, CD: 24x). Replacing ODD Remove battery module O D D R E M O V A...

Upgrade & Replacement 4 - 16 Removing ODD Module 1. Remove 1 screw (M2.5*4L (K)). O D D R E M O V A L M2.5*4L 2. Push the ODD Module out by a pair of tweezers. Installing new ODD module 3. Insert the ODD module. O D D M O D U L E I N S T A L L A T I O N

HARDWARE SPECIFICATION 5- 1 Hardware Specifications You can enjoy and utilize the S62 series Notebook more effectively with a better comprehension of detailed hardware specifications of the notebook. his chapter lists the detailed specifications of the notebook’s main system and modules. Please refe...

HARDWARE SPECIFICATION 5- 2 1 MARKETING SPEC S62 Specification (Two-Spindle Design) Product Family S62 Dimension 328 x 288x 27-38mm Weight 2.4 Color Silver-Gray CPU Type Intel Yonah 1M/2M Speed 1.66G,1.83G,2.0G,2.16G Package Micro-PGA 479M Socketable L2 Cache Yes Size 2M On-die cache memory Memory T...

HARDWARE SPECIFICATION 5- 4 Spec 56K I/F Azalia MDC Jack RJ-11 RJ-11 port ACPI Yes V.90 Yes Voice Phone No Digital Line Protection Yes Wake On Ring Yes BT No Controller CSR BT-183 I/F USB ANT Chip antenna LAN Jack RJ-45 RJ-45 port Wake On LAN YES Controller RealTEK RTL8110SB Internal Keyboard Vendor...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 9 2 CHIPSET LIST Chipset Summary Table Function S62 HW ACPI/PC99 CPU Intel Yonah Not required SRAM (L2 Cache) 2M Not required North Bridge Intel 945GM YES South Bridge Intel ICH7M YES MEMORY DDR II SDRAM Not requ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 11 2.2 CHIPSET 2.2.1 North Bridge Function: Full support 32bits AGTL+ host bus addressing Supports 400/533/667 DDR2 device Integrates the graphic controller Support Intel Rapid Memory power management DMI x2/x4 I...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 12 2.3.2 EXPANSION MEMORY Number of sockets: Bus: Supply voltage: Functional features: Hardware features: Two 200 pin SO-DIMM socket 64-bit data path 1.8V Supports up to 16 simultaneous open pages Supports DDR2 4...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 14 2.7 PCMCIA Controller Function: PC99, ACPI 1.0 and PCI bus power management 1.1 Design compliant Integrated PC Card Controller Support 1995 PC Card (PCMCIA 2.2) Integrated Card Bus Controller PC98/99/2001 comp...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 15 2.9 AUDIO CODEC Function features: Fully Compliant HD Audio Compliant. 20-bit Stereo Digital to Analog Converters. 18-bit Stereo Analog to Digital Converters. High-quality pseudo-Differential CD input. Meets o...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 17 3 KEY PARTS LIST Key Parts Summary: S62 Project Keyparts List Priority Vendor Model No. ASUS Part No. CPU 1 Intel INT CO667 DC 2.16G T2600 L8VN 1 Intel INT CO667 DC 2.0G T2500 L8VP Intel INT CO667 DC 1.83G T24...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 20 3.1 Display WXGA Technology: Active color (TFT: Thin Film Transistor) Size: 14.1”W Resolution: WXGA (1280 X 800) Dimension: Pixel Pitch: 0.279mm x 0.279mm Display Colors: 262,144 Vendor: AUO/CMO/Hansstar WXGA ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 21 Hardware features: Vendor/Model: Standard I/O addresses: 1F0h to 1F7h and 3F6h Support of minimum IRQ 14 Support of at least 3 DMA channels, if DMA is supported Easily removable and exchangeable for user’s fut...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 22 3.5 Touch Pad Dimensions: Sensor effective areas: Interface: X/Y position resolution: Customizing: 65 mm(W) x 49 mm(H) x 2.82 mm(T) 62.5 mm(W) x 46.5 mm(H) PS/2 40 points / mm (graphics mode) Custom color can ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 24 Regulatory: EMI: Safety: FCC Class B CISPR 22 Class B .Dimension: (L) 114.5 x (W) 49.5 x (H) 29 mm

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 25 4 SYSTEM 4.1 System diagram

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 26 4.2 Main components block diagrams

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 27 4.3 System resource 4.3.1 IRQ Map IRQ# Description IRQ 0 System Timer IRQ 1 Keyboard IRQ 2 [Cascade] IRQ 3 IrDA IRQ 4 USB Controller IRQ 5 VGA / USB Controller IRQ 6 Available IRQ 7 Parallel Port IRQ 8 System ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 28 4.3.3 PCI INT Map INT Description INTA Giga LAN Chip INTB CARDBUS, 1394, INTC INTD 4.3.4 PCI Bus Master Map REQ Description REQ0 CARDBUS, 1394 REQ1 REQ2 LAN REQ3 None REQ4 None 4.3.5 IDSEL IDSEL CHIPSET AD23 L...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 29 5 I/O PORT PIN ASSIGNMENT No FUNCTION DESCRIPTION .CRT Display (Analog) HDD ODD LCD KEYBOARD TOUCHPAD&LED 1 ST BATTERY .DC IN Adapter Input .AUDIO Headphone, Microphone-In .FAN .INVERTER .MDC .1394 .USB Un...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 31 5.2 Hard disk pin assignment Vendor Part No. Pin No. ALLTOP C17851-144A1-L 44 Pin (SMT) No. Signal Description Type 44 IDERST#_5S Reset primary disk O 43 GND Ground P 42 PDD7 Primary disk data 7 I/O 41 PDD8 Pr...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 32 19 GND Ground P 18 PIORDY_3S Primary disk IO channel ready I 17 CSEL Cable select (device configuration) O 16 PDDACK#_3S Primary DMA acknowledge O 15 GND Ground P 14 IRQ14_3S Primary disk interrupt I 13 HIOCS1...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 34 5.4 LCD pin assignment Vendor Part No. Pin No. ENTERY 3761-Q30C-01R 30 Pin (SMT) No. Signal Description Type 1 LVDS_U1N Data channel 1- of Channel A O 2 LVDS_L0N Data channel 0+ of Channel B O 3 LVDS_U1P Data ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 35 26 EDID_CLK EDID Clock I 27 PID_0 Panel ID bit 0 I 28 EDID_DAT EDID DATA I 29 LCD_VCC +3V power supply P 30 LCD_VCC +3V power supply P

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 36 5.5 Internal keyboard pin assignment Vendor Part No. Pin No. ENTERY 6905-E28N-00R 28 Pin (SMT) No Signal Description Type 1 KSI1 Keyboard matrix column 1 I 2 KSO7 Keyboard matrix row 7 O 3 KSI7 Keyboard matrix...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 37 26 KEYDETECT0 Keyboard ID bit 0 I 27 GND Ground GND 28 KEYDETECT1 Keyboard ID bit 1 I 5.6 Internal Touch Pad Pin assignment Vendor Part No. Pin No. ENTERY 6701-20 10 Pin (SMT) No Signal Description Type 1 +5VS...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 38 5.7 1 ST Battery pin assignment No Signal Description Type 1 BAT_CON Battery input/output voltage P 2 BAT_CON Battery input/output voltage P 3 BAT1_CNT1# NVDC control pin 1 I 4 BAT1_CNT2# NVDC control pin 2 I ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 39 2 INTSPKR- Internal speaker left sound negative O 3 INTSPKL+ Internal speaker signal channel positive O 4 INTSPKL- Internal speaker left sound negative O 5.9.2 Headphone Jack Vendor Part No. Pin No. SINGATRON ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 40 5.10 Fan Pin Assignment Vendor Part No. Pin No. ACES 85205-03701 3 Pin (SMT) No Signal Description Type 1 +5VS_FAN 5V Power Supply P 2 FANSP1 FAN speed signal input I 3 GND Ground P 5.11 Inverter pin assignmen...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 41 17 GND Ground P 18 INTMIC_A_GND Audio Ground P 19 GND Ground P 20 INVMIC_A Internal MIC I *** 5.12 MDC signal Vendor Part No. Pin No. AMP 1-179397-2 12 Pin (SMT) No Signal Description Type 1 GND Ground NC 2 NC...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 42 4 LTPA0+ Twisted-pair cable A positive I/O 5.14 USB pin assignment Vendor Part No. Pin No. SUYIN 020122MR008S523ZA 8 Pin (DIP) No Signal Description Type 1 +5V_USB01 USB 5V power P 2 USB_P0- USB port 0 negativ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 43 ALLTOP C10089-112A4-Y 12 Pin (DIP) No Signal Description Type 1 None None NC 2 RJ11_RING Modem signal I/O 3 RJ11_TIP Modem signal I/O 4 None None NC 5 LAN_TXP Transmit data positive signal O 6 LAN_TXN Transmit...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 44 12 MS_CD 13 MS_DATA3 14 SD_CMD 15 MS_SCLK 16 MS_VCC 17 SD_DAT3 18 GND 19 SD_DAT2 20 SD_WP 21 SD_CD 6 POWER MANAGEMENT 6.1 System power plane Power Group Power Control Pin Controlled Devices +12V SUSC# Control ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 45 6.2 Power management mode 6.2.1 Full-On mode All system devices are not power managed and the system can respond to applications with maximum performance. 6.2.2 Doze mode The CPU clock is slow down but all oth...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 47 6.3.1 Lid switch Display mode State Lid close Lid open Full on LCD OFF No action Stand by LCD OFF No action LCD STR/STD LCD OFF No action Full on No action No action Stand by No action No action CRT STR/STD No...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 49 6.4.1 Device PM control during Stand By mode Device Power Controlled by Description CPU Hardware Controlled by LDTSTP# PCMCIA Controller Software Enter PCI PM D3Hot state Super I/O Chip Working Keyboard Contro...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 50 6.4.2 Device PM control during STR mode Device Power Down Controlled by Description Super I/O Hardware Power Down HDD Hardware Power Off CD-ROM Hardware Power Off Internal Modem Software Power Off LAN Software...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 51 6.4.3 Device PM control during STD mode Device Power Down Controlled by Description Core Logic Hardware Power off (except Resume Well) Super I/O Hardware Power off VGA Chip Hardware Power off HDD Hardware Powe...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 52 7 MODULE SPECIFICATION 7.1 Overall System The notebook system consists of the following PCB assembly and modules. 7.1.1 Board assembly Processor Upgradeable CPU (u-PGA 479) Main Board Main System board Inverte...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 53 7.3 Main board 7.3.1 Main system module spec Feature: CPU socket, Intel 945GM, Intel ICH7M, Clock generator, SDRAM & its expansion sockets, PC/AT compatible system (RTC, DMA, INT, Timer, … etc) IDE control...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 55 Input: Adapter Contain Min Typ. Max Charge current (3S3P) Charge current (3S2P) Ripple & Noise 500mV Efficiency 90% 7.4 Inverter Board Inverter spec Input voltage: 12~20V Output current: 6.5mA(max) Start v...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 56 7.5 Adapter spec 7.5.1 Input Input voltage: 90~240VAC, Full range Input frequency: 47~63Hz Input current: 1.5A(max)/100VAC Inrush current: 60A(max)/100VAC, 120A(max)/240VAC Efficiency: 80%(min) 7.5.2 Output 65...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 57 7.7 LAN Spec Controller: REALTEK RTL8110SB Interface: PCI Compliant to PCI 2.2 Support ACPI , PCI power management Support for Wake-On-LAN during S3,S4 Integrated IEEE 802.3x 10BASE-T and 100 BASE-TX and Giga ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 58 8 MISCELLANEOUS 8.1 Indicators Power LED Feature: Type: Color: Show System power status 5 ψ LED Green Indication: On: System in ON Mode Flash (0.3Hz): System in SUSPEND Mode Off: System in OFF Mode Location: O...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 59 Indication: On: RF on Off: No ststus Location: On board Hard Disk Drive LED Feature: Type: Color: Location: On: While HDD Read/Write access 5 ψ LED Green LED Board (in top of System) Caps LOCK LED Feature: Typ...

S62 series Hardware Technical Specification Rev. 1.0 06/04/20 ASUSTeK Confidential Page 60 Europe P-CORD 1.8m 250V 2.5A EUR 2-PIN WS-027-T Well shin Austria P-CORD 1.8m 250V 2.5A AUS 2-PIN WS-027-T Well shin South Asia P-CORD 1.8m 125V 7A WS016+WS027 WS-027-T Well shin 8.3 Safety/ EMI Appliance (TBD...

BIOS SPECIFICATION 6-1 Software Specifications Get to know more about the S62 series Notebook with a detailed look at the software specifications. he information contained in the chapter can be quite useful when you are troubleshooting the system’s hardware. Each item has its individual usage for yo...

BIOS SPECIFICATION 6-2 1. General Description The specification is a guideline for BIOS development on S62 series platform. Anyone who needs the information of system BIOS can read it for reference. The general device specification, SMBUS, PCI Devices IRQ Routing Table, GPIO pins definition and so o...

BIOS SPECIFICATION 6-3 2. Summary of Hardware Configuration 2.1 KEY COMPONENTS LIST The key components used on S62 series are listed below. Table 2-1 Key components Item Vendor Part’s Name Revision CPU Intel Yonah 1.6G/1.8G/2.0G/2.16G North Bridge Intel Calitoga-945GM South Bridge Intel ICH7-M VGA I...

BIOS SPECIFICATION 6-13 5. GPIO Pin Assignment The following tables are the definition of GPIO pins. Some of GPIO pins need to be initialized by system BIOS and some of them need the driver to support. Please check the Description column for reference. Table 5-1. ICH7-M GPIO Definition GPIO Type Nam...

BIOS SPECIFICATION 6-22 7. CMOS Setup Utility S62 series system BIOS allows users to change some system hardware/function settings during POST (power on self test) stage, users may hit F2 key to enter SETUP mode in POST, the setup feature is categorized into 7 menus described as below: 7.1 MAIN MENU...

BIOS SPECIFICATION 6-30 8. BIOS Flash Utility There are two utilities for updating S62 series BIOS. One is DOS mode utility and the other is Windows mode utility. The detailed information is in Table 8-1. Table 8-1: BIOS Flash Utilities Utility Name Supported OS Revision Aflash2 DOS 2.10 and later W...