Asus MAXIMUS VI GENE- Manuals

v Contents 3.9 Exit menu .................................................................................... 3-44 3.10 Updating BIOS ............................................................................ 3-45 3.10.1 ASUS Update utility ...................................................... 3-...

vi technologies .................................................................. 4-36 4.5 Creating a RAID driver disk ....................................................... 4-48 4.5.1 Creating a RAID driver disk without entering the OS .... 4-48 4.5.2 Creating a RAID driver disk in Windows ® .......

vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cab...

viii About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technolog...

ix Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. Typography Bold text Indicates a menu or an item to select. Italic s Used to emphasize a word or a phrase. <Key> Keys enclosed in the less-than a...

x CPU LGA1155 socket for 3rd/ 2nd Generation Intel ® Core™ i7/ Core™ i5/Core™ i3/Pentium/Celeron Processors Supports 22nm/32nm CPU Supports Intel ® Turbo Boost Technology 2.0 *The Intel ® Turbo Boost Technology 2.0 support depends on the CPU types. **Refer to www.asus.com for Intel CPU support list ...

xiii Back I/O Ports 1 x Clear CMOS button 1 x ROG Connect On/Off switch 4 x USB 2.0 (1 port can be switched to ROG Connect) 1 x eSATA 3Gb/s 4 x USB 3.0 [blue] 1 x Optical S/PDIF out 1 x HDMI port 1 x DisplayPort 1 x LAN (RJ45) port 6 x Audio jacks Internal I/O Ports I/O Ports 1 x USB 3.0 connector s...

ROG MAXIMUS V GENE 1-1 1.1 Welcome! Thank you for buying an ROG MAXIMUS V GENE motherboard!The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards!Before you start installing the motherboard, and hardware devic...

1-2 Chapter 1: Product Introduction Chapter 1 1.3 Special features 1.3.1 Product highlights Republic of Gamers The Republic of Gamers consists only the best of the best. We offer the best hardware engineering, the fastest performance, the most innovating ideas, and we welcome the best gamers to join...

ROG MAXIMUS V GENE 1-3 Chapter 1 PCIe 3.0 PCI Express ® 3.0 (PCIe 3.0) is the latest PCI Express bus standard with improved encoding schemes that provide twice the performance of current PCIe 2.0. Total bandwidth for a x16 link reaches a maximum of 32GB/s, double the 16GB/s of PCIe 2.0 (in x16 mode)...

1-4 Chapter 1: Product Introduction Chapter 1 1.3.2 ROG unique gaming features SupremeFX III Supreme Sound The SupremeFX III™ onboard audio solution is an 8-channel HD audio equipped with a carefully selected 1500uF capacitor which provides clean, ripple-free audio power and – perfect for enveloping...

ROG MAXIMUS V GENE 1-5 Chapter 1 ROG Connect Plug and Overclock - Tweak it the hardcore way! Monitor the status of your desktop PC and tweak its parameters in real-time via a notebook—just like a race car engineer—with ROG Connect. ROG Connect links your main system to a notebook through a USB cable...

1-6 Chapter 1: Product Introduction Chapter 1 GPU.DIMM Post Easily check the status of your graphics cards and memory in the BIOS! Notice potential problems even before your enter the OS! Overclockers can save valuable minutes in detecting component failure under extreme conditions. With GPU.DIMM Po...

ROG MAXIMUS V GENE 1-7 Chapter 1 1.3.4 ASUS special features Intel Gigabit LAN Experience the fast network connectivity! The LAN solution from Intel has been long known to have a better throughput, lower CPU utilization as well as better stability. With the Intel Gigabit LAN solutions onboard, the u...

ROG MAXIMUS V GENE 2-1 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or t...

Chapter 2 2.2 Motherboard overview 2.2.1 Motherboard layout Refer to 2.2.8 Connectors and 2.3.11 Rear panel connection for more information about rear panel connectors and internal connectors. 2-2 Chapter 2: Hardware information

Chapter 2 2.2.2 Layout contents Connectors/Jumpers/Switches/Slots Page 1. Power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-34 2. LGA1155 CPU Socket 2-4 3. CPU, and chassis fan connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN1-3) 2-32 4. DDR3 DIMM slots 2-5 5. GO button 2-19 6. USB 3.0 conne...

Chapter 2 Recommended memory configurations Install one memory module in slot A2 first as a single-channel operation. 2.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module....

Chapter 2 Memory configurations You may install 1GB, 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess m...

Chapter 2 MAXIMUS V GENE Motherboard Qualified Vendors Lists (QVL) DDR3 2666(O.C.) MHz capability Vendors Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) 2 DIMM 4 DIMM G.SKILL F3-2666CL10Q-16GBZHD(XMP) 4GB(4 x 4GB) DS - - 10-12-12-31 1.65 • • MAXIMUS V GENE Mot...

Chapter 2 MAXIMUS V GENE Motherboard Qualified Vendors Lists (QVL) DDR3 2133(O.C.) MHz capability Vendors Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) 2 DIMM 4 DIMM A-DATA 8154A 1044(XMP) 2GB SS - - 9-9-9-24 1.55-1.75 • • A-DATA AX3U2133C2G9B(XMP) 2GB SS - -...

Chapter 2 MAXIMUS V GENE Motherboard Qualified Vendors Lists (QVL) DDR3 1333 MHz capability Vendors Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) 2 4 EK Memory EKM324L28BP8-I13 4GB(2 x 2GB) DS - - 9 - • • Elixir M2F2G64CB88B7N-CG 2GB SS Elixir N2CB2G808N-CG -...

Chapter 2 2.2.5 Expansion slots Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. • ASUS exclusively provides hyper DIMM support function.• Hyper DIMM support is subject to the physical charact...

Chapter 2 Slot No. Slot Description 1 PCIe 3.0/2.0 x16/x8_1 slot 2 PCIe 3.0/2.0 x8_2 slot 3 PCIe 2.0 x4_1 slot VGA configuration PCI Express operating mode PCIE_x16/x8_1 PCIE_x8_2 Single VGA/PCIe card x16 (Recommend for single VGA) N/A Dual VGA/PCIe card x8 x8 • PCIe 3.0 support depends on CPU type ...

Chapter 2 2.2.6 Onboard switches Onboard switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on switch Press the power-on switch to wake/power up the ...

Chapter 2 2.2.7 Onboard LEDs 1. Hard Disk LED The hard disk LED is designed to indicate the hard disk activity. It blinks when data is being written into or read from the hard disk drive. The LED does not light up when there is no hard disk drive connected to the motherboard or when the hard disk dr...

Chapter 2 4. Power LED The motherboard comes with a power-on switch that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The i...

Chapter 2 5. Q-Code LEDs The Q-Code LED design provides you the 2-digit display, allowing you to know the system status. Refer to the Q-Code table below for details. Q-Code table Code Description 00 Not used 01 Power on. Reset type detection (soft/hard). 02 AP initialization before microcode loading...

Chapter 2 Code Description 3B – 3E Post-Memory PCH initialization is started 4F DXE IPL is started 50 – 53 Memory initialization error. Invalid memory type or incompatible memory speed 54 Unspecified memory initialization error 55 Memory not installed 56 Invalid CPU type or Speed 57 CPU mismatch 58 ...

Chapter 2 2.2.8 Internal connectors 1. Intel ® Z77 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [red]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 config...

Chapter 2 3. Asmedia Asmedia ® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [red]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. • You must install Windows ® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. ...

Chapter 2 You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 4...

Chapter 2 6. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purch...

Chapter 2 7. CPU, and chassis fan connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1/2/3) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. • The CPU_FAN connector supports the CPU fan of maximum...

Chapter 2 8. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. • We recommend that you connect a h...

Chapter 2 9. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • For a fully ...

Chapter 2 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin IDE_...

Chapter 2 2.3 Building your computer system 2.3.1 Additional tools and components to build a PC system 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel LGA 1155 CPU Intel LGA 1155 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics c...

Chapter 2 1 2 3 2.3.2 CPU installation The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a LGA1156 CPU on the LGA1155 socket. A B 2-36 Chapter 2: Hardware information

Chapter 2 2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 2 B B A A 1 3 4 2-38 Chapter 2: Hardware information

Chapter 2 To uninstall the CPU heatsink and fan assembly 2 A B B A 1 ROG MAXIMUS V GENE 2-39

Chapter 2 1 2 3 To remove a DIMM 2.3.4 DIMM installation B A 2-40 Chapter 2: Hardware information

Chapter 2 2.3.5 Motherboard installation Motherboard installation 2 1 • The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. • If you are installing an mPCIe Combo card, refer to 2.3.10 mPCIe Combo installation ...

Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. 3 2-42 Chapter 2: Hardware information

Chapter 2 2.3.6 ATX Power connection 1 2 OR OR ROG MAXIMUS V GENE 2-43

Chapter 2 2.3.7 SATA device connection OR 2 OR 1 2-44 Chapter 2: Hardware information

Chapter 2 2.3.8 Front I/O Connector IDE_LED POWER SW RESET SW IDE_LED- IDE_LED+ PWR Reset Ground Ground 1 2 To install ASUS Q-Connector USB 2.0 AAFP To install USB 2.0 Connector To install front panel audio connector USB 3.0 To install USB 3.0 Connector ROG MAXIMUS V GENE 2-45

Chapter 2 2.3.9 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards 2-46 Chapter 2: Hardware information

Chapter 2 2.3.10 mPCIe Combo installation The mPCIe Combo is a mini card that allows you to add a mPCIe module and an mSATA module into your motherboard. • This mPCIe Combo supports half-sized mPCIe modules (26.8mm x 30 mm) only. • The mPCIe Combo supports both full-sized and half-sized mSATA module...

Chapter 2 • The mPCIe Combo fits in one orientation only. • Insert the mPCIe Combo with caution to prevent damage to the module, or the mPCIe_Combo connector pins, or the motherboard. 5. Locate the mPCIe_Combo connector on the motherboard. Align and insert the mPCIe Combo on the connector. 6. Secure...

Chapter 2 7. Remove the bolt from the Wi-Fi antenna connector. Leave the washer on the connector. 8. Insert the connector into the I/O shield’s Wi-Fi port hole. Ensure that the washer is placed between the connector and the back of the I/O Shield. The Wi-Fi antenna and its cables are purchased separ...

Chapter 2 Installing the mSATA module To install the mSATA module: 1. Unlock the mSATA clip. 2. Insert the mSATA card into the MSATA slot. The mSATA card fits in one orientation only. If it doesn’t fit, try reversing it. 3. Lock the mSATA clip. A 2 3 B A A B ROG MAXIMUS V GENE 2-51

Chapter 2 6. Secure the mPCIe Combo in place with the screw removed in step 4 ROG MAXIMUS V GENE 2-53

Chapter 2 2.3.11 Rear panel connection *and **: Refer to the tables on the next page for LAN port and audio port definitions. Rear panel connectors 1. External SATA ports2. Optical S/PDIF Out port3. LAN (RJ-45) port*4. Clear CMOS switch5. ROG Connect switch6. USB 2.0 ports7. USB 2.0 port, also ROG C...

Chapter 2 **Audio 2, 4, 6, or 8-channel configuration Port H e a d s e t 2-channel 4-channel 6-channel 8-channel Light Blue Line In Line In Line In Line In Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Mic In Mic In Orange – – Center/Subwoofer Center/Subwoofe...

Chapter 2 Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers 2.3.12 Audio I/O connections Audio I/O ports 2-56 Chapter 2: Hardware information

Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers ROG MAXIMUS V GENE 2-57

Chapter 2 2.4 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with...

ROG MAXIMUS V GENE 3-1 Chapter 3 3.1 Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. User...

3-2 Chapter 3: BIOS setup Chapter 3 3.2.1 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the EZ Mode...

ROG MAXIMUS V GENE 3-3 Chapter 3 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Extreme Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu ite...

3-4 Chapter 3: BIOS setup Chapter 3 3.2.2 EZ Mode The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode , then select Advanced Mode ....

ROG MAXIMUS V GENE 3-5 Chapter 3 3.3 Extreme Tweaker menu The Extreme Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Extreme Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options ...

3-6 Chapter 3: BIOS setup Chapter 3 Scroll down to display the following items: Load Gamers’ OC Profile Press <Enter> and select Yes to load the Gamers’ OC profile to suit extreme overclocking. CPU Level Up [Disabled] Allows you to select a CPU level, and the related parameters will be automat...

ROG MAXIMUS V GENE 3-7 Chapter 3 BCLK/PEG Frequency [XXX] Allows you to adjust the CPU and VGA frequency to enhance the system performance. Use the <+> and <-> keys to adjust the value. You can also key in the desired value using the numeric keypad. The values range from 80.0MHz to 300.0...

3-8 Chapter 3: BIOS setup Chapter 3 Internal PLL Overvoltage [Auto] Allows you to set the internal PLL voltage. Configuration options: [Auto] [Enabled] [Disabled] CPU bus speed : DRAM speed ratio mode [Auto] Allows you to set the CPU bus speed to DRAM speed ratio mode. [Auto] DRAM speed is set to th...

ROG MAXIMUS V GENE 3-9 Chapter 3 DRAM RAS# PRE Time [Auto] Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock] DRAM RAS# ACT Time [Auto] Configuration options: [Auto] [1 DRAM Clock] – [255 DRAM Clock] DRAM COMMAND Mode [Auto] Configuration options: [Auto] [1 DRAM Clock] [2 DRAM Clock] [3 ...

3-10 Chapter 3: BIOS setup Chapter 3 Third Timings tWRDR (DD) [Auto] Configuration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock] tRWDR (DD) [Auto] Configuration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock] tRWSR [Auto] Configuration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock] tRR (DD) [Auto...

ROG MAXIMUS V GENE 3-11 Chapter 3 MCH Duty Sense (CHB) [Auto] Configuration options: [Auto] [1] – [31] Channel A DIMM Control [Enable Both DIMMS] Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS]Channel B DIMM Control [Enable Both DIMMS] Configuration op...

3-12 Chapter 3: BIOS setup Chapter 3 Long Duration Power Limit [Auto] Allows you to limit the turbo ratio’s long duration power. Use the <+> and <-> keys to adjust the value. Long Duration Maintained [Auto] Allows you to maintain the turbo ratio’s long duration power. Use the <+> a...

ROG MAXIMUS V GENE 3-13 Chapter 3 DIGI+ Power Control Do not remove the thermal module while changing the DIGI+ Power Control related parameters . The thermal conditions should be monitored. Some of the following items are adjusted by typing the desired values using the numeric keypad and press the ...

3-14 Chapter 3: BIOS setup Chapter 3 CPU Current Capability [Auto] This item provides wider total power range for overclocking. A higher value brings a wider total power range and extends the overclocking frequency range simultaneously. Configuration options: [100%] [110%] [120%] [130%] [140%] [150%...

ROG MAXIMUS V GENE 3-15 Chapter 3 DO NOT remove the thermal module. The thermal conditions must be monitored. VCCIO The sub-items in this menu allow you to set the VCCIO settings. VCCIO Switching Freq [Auto] Allows you to switch the VCCIO frequency Configuration options: [Auto] [1X] [1.65X] VCCIO Fu...

3-16 Chapter 3: BIOS setup Chapter 3 DRAM Voltage [Auto] Allows you to set the DRAM voltage. The values range from 1.20V to 1.92V with a 0.005V interval. The 1.92V voltage is available only when the Extreme OV item is set to [Enabled]. According to Intel CPU spec, DIMMs with voltage requirement over...

ROG MAXIMUS V GENE 3-17 Chapter 3 VTTDDR Voltage [Auto] Allows you to set the VTTDDR voltage for DRAM channel. The values range from 0.6250V to 1.1000V with a 0.00625V interval. DRAM CTRL REF Voltage on CHA/B [Auto] Allows you to set the DRAM Control Reference Voltage on Channel A/B. The values rang...

3-18 Chapter 3: BIOS setup Chapter 3 3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. 3.4.1 Syst...

ROG MAXIMUS V GENE 3-19 Chapter 3 3.4.4 Security The Security menu items allow you to change the system security settings. • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 2.3.11 Rear panel connectors for information on how ...

3-20 Chapter 3: BIOS setup Chapter 3 To change an administrator password:1. Select the Administrator Password item and press <Enter>. 2. From the Enter Current Password box, key in the current password, then press <Enter>. 3. From the Create New Password box, key in a new password, then ...

ROG MAXIMUS V GENE 3-21 Chapter 3 Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.

3-22 Chapter 3: BIOS setup Chapter 3 3.5.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in this screen may be different due to the CPU you installed. Scroll down to display the following items: Intel Adaptive Thermal M...

ROG MAXIMUS V GENE 3-23 Chapter 3 [Enabled] Two threads per activated core are enabled. [Disabled] Only one thread per activated core is enabled. Active Processor Cores [All] Allows you to choose the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3] ...

3-24 Chapter 3: BIOS setup Chapter 3 Turbo Mode [Enabled] [Disabled] Disables this function.[Enabled] Allows processor cores to run faster than marked frequency in specific condition. [Disabled] The CPU runs at its default speed.[Enabled] The operating system controls the CPU speed. CPU C1E [Auto] [...

ROG MAXIMUS V GENE 3-25 Chapter 3 High Precision Timer [Enabled] Allows you to enable or disable the High Precision Event Timer. Configuration options: [Enabled] [Disabled] Intel(R) Rapid Start Technology [Disbled] Allows you to enable or disable Intel(R) Rapid Start Technology. Configuration option...

3-26 Chapter 3: BIOS setup Chapter 3 3.5.3 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. SATA Mode Selection [AHCI] Allows you to set the SATA c...

ROG MAXIMUS V GENE 3-27 Chapter 3 Hot Plug [Enabled] Allows you to enable or disable the hot plug support of the SATA ports. Configuration options: [Disabled] [Enabled] External SATA [Enabled] Allows you to enable or disable the support of the External SATA. Configuration options: [Disabled] [Enable...

3-28 Chapter 3: BIOS setup Chapter 3 Memory Remap Feature [Enabled] Allows you to enable remapping the memory above 4GB.[Enabled] Enables the function. [Disabled] Disables this function. Graphics Configuration [Auto] Allows you to select a primary display from iGPU, and PCIe graphical devices. Prima...

ROG MAXIMUS V GENE 3-29 Chapter 3 3.5.5 USB Configuration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None . Legacy USB Support [Enabled] [Enabled] Enables the support for USB d...

3-30 Chapter 3: BIOS setup Chapter 3 3.5.6 Onboard Devices Configuration HD Audio Controller [Enabled] [Enabled] Enables the High Definition Audio Controller. [Disabled] Disables the controller. The following two items appear only when you set the Azalia HD Audio item to [Enabled]. Front Panel Type ...

3-32 Chapter 3: BIOS setup Chapter 3 ErP Ready [Disabled] This item allows user to switch off some power at S5 to get the system ready for ErP requirement. When set enabled to Enabled, all other PME options will be switched off. Configuration options: [Disabled] [Enabled] Restore AC Power Loss [Powe...

ROG MAXIMUS V GENE 3-33 Chapter 3 3.5.8 Network Stack Network Stack [Disable Link] This item allows user to disable or enable the UEFI network stack. Configuration options: [Disable Link] [Enabled] The following items appears only when you set the Network Stack to [Enabled] . Ipv4 PXE Support [Enabl...

3-34 Chapter 3: BIOS setup Chapter 3 3.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Anti Surge Support [Enabled] This item allows you to enable or disable the Anti Surge function. Configuration options: [Disabled] [Enabled] ...

ROG MAXIMUS V GENE 3-35 Chapter 3 Fan Speed Monitor CPU FAN; CPU FAN OPT Speed; Chassis FAN1/2/3 Speed [xxxxRPM] or [Ignored] / [N/A] The onboard hardware monitor automatically detects and displays the CPU fan, chassis fan, and optional fan speed in rotations per minute (RPM). If any of the fans is ...

3-36 Chapter 3: BIOS setup Chapter 3 CPU Fan Max. Duty Cycle(%) [100] Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle. CPU Lower Temp...

ROG MAXIMUS V GENE 3-37 Chapter 3 Chassis Lower Temperature [40] Displays the lower limit of the chassis temperature. Chassis Fan Min. Duty Cycle(%) [60] Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values range from 0% to 100%. When the chassis temperature ...

3-38 Chapter 3: BIOS setup Chapter 3 Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off]. Full Screen Logo [Enabled] [Enabled] Enables the full screen logo display feature. [Disabled] Disables the full screen logo displ...

ROG MAXIMUS V GENE 3-39 Chapter 3 Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. • To select the boot device during system startup...

3-40 Chapter 3: BIOS setup Chapter 3 3.8 Tool menu The Tool menu items allow you to configure options for special functions. Select an item then press <Enter> to display the submenu. 3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2 Utility. When you press <Enter> to start ...

ROG MAXIMUS V GENE 3-41 Chapter 3 3.8.2 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. The O.C. Profile Configuration items show Not Installed if no profile is created. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure!...

3-42 Chapter 3: BIOS setup Chapter 3 3.8.3 Asus SPD Information This item displays the SPD information.

ROG MAXIMUS V GENE 3-43 Chapter 3 3.8.4 GO Button File This menu allows you to set the GO Button files, and load the desired GO Button file. BCLK/PCIE Frequency; CPU Voltage; DRAM Voltage; VCCSA/IO Voltage; CPU PLL Voltage; PCH Voltage; 2nd VCCIO 2nd VCCIO Voltage; VTTDDR Voltage; IGPU Voltage; CPU ...

3-44 Chapter 3: BIOS setup Chapter 3 3.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the defaul...

ROG MAXIMUS V GENE 3-45 Chapter 3 3.10 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility, or performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually ...

3-46 Chapter 3: BIOS setup Chapter 3 3.10.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows ® environment. The ASUS Update utility allows you to:• Update the BIOS directly from the Internet • Download the latest BIOS file f...

ROG MAXIMUS V GENE 3-47 Chapter 3 4. You can decide whether to change the BIOS boot logo, which is the image appearing on screen during the Power-On Self-Tests (POST). Click Yes if you want to change the boot logo or No to continue. 3. Select the BIOS version that you want to download. Click Next . ...

3-48 Chapter 3: BIOS setup Chapter 3 • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. Updating the BIOS through a BIOS...

ROG MAXIMUS V GENE 3-49 Chapter 3 3.10.2 ASUS EZ Flash 2 Utility The ASUS EZ Flash 2 Utility feature allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com....

3-50 Chapter 3: BIOS setup Chapter 3 3.10.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard suppo...

ROG MAXIMUS V GENE 3-51 Chapter 3 Booting the system in DOS environment 1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. 2. Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS Boot Device Select Menu . Insert the support DVD into...

3-52 Chapter 3: BIOS setup Chapter 3 2. The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS backup is done, press any key to return to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2010/04/29] Current ROM Update ROM Note Saving BIOS: PATH: A:\ BOARD: MAXIMUS V ...

ROG MAXIMUS V GENE 3-53 Chapter 3 4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater. Restart your computer. DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.04 or later, the...

3-54 Chapter 3: BIOS setup Chapter 3 3.10.5 USB BIOS Flashback The USB BIOS Flashback allows user to update the BIOS without entering the BIOS or the operating system by using a USB flash disk drive under standby power. 1. Download the latest BIOS file from the ASUS website 2. Extract and rename the...

ROG MAXIMUS V GENE 4-1 If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD. 4.1 Installing an operating system This motherboard supports Windows ® XP/ 64-bit XP/ 7 / 64-bit ...

4-2 Chapter 4: Software support Chapter 4 4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Rea...

ROG MAXIMUS V GENE 4-3 Chapter 4 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.3.1 AI Suite II AI Suite I...

4-4 Chapter 4: Software support Chapter 4 4.3.2 TurboV EVO ASUS TurboV EVO introduces TurboV that allows you to manually adjust the CPU frequency and related voltages as well as CPU Level Up function that offers automatic and easy overclocking and system level up. After installing AI Suite II from t...

ROG MAXIMUS V GENE 4-5 Chapter 4 Using Advanced Mode Click on the Advanced Mode tab to adjust the advanced voltage settings. CPU Ratio Allows you to manually adjust the CPU ratio. The first time you use CPU Ratio , go to Extreme Tweaker > CPU Power Management in BIOS and set the Turbo Ratio item ...

4-6 Chapter 4: Software support Chapter 4 CPU Level Up ASUS TurboV EVO includes three CPU Level Up modes, providing the most flexible auto- tuning options. • The overclocking result varies with the CPU model and the system configuration. • To prevent overheating from damaging the motherboard, a bett...

ROG MAXIMUS V GENE 4-7 Chapter 4 3. TurboV automatically overclocks the CPU, saves BIOS settings, and restarts the system. After re-entering Windows, a message appears indicating successful overclocking. Click OK to exit.

4-8 Chapter 4: Software support Chapter 4 4.3.3 DIGI+ Power Control New DIGI+ PowerControl allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability. It also provides the highest power efficiency, generating less heat to longer component lifespan and minimize pow...

ROG MAXIMUS V GENE 4-9 Chapter 4 Application aids Apply all changes immediately Undo all changes without applying Function no. Function description 7 CPU Power Thermal Control A higher temperature brings a wider CPU power thermal range, and extends the overclocking tolerance to enlarge overclocking ...

4-10 Chapter 4: Software support Chapter 4 • The actual performance boost may vary depending on your CPU specification. • Do not remove the thermal module. The thermal conditions must be monitored. DRAM Power Function no. Function description 1 DRAM Current Capability A higher value brings a wider t...

ROG MAXIMUS V GENE 4-11 Chapter 4 4.3.4 EPU EPU is an energy-efficient tool that satisfies different computing needs. This utility provides several modes that you can select to save system power. Selecting Auto mode will have the system shift modes automatically according to current system status. Y...

4-12 Chapter 4: Software support Chapter 4 4.3.5 Probe II Probe II is a utility that monitors the computer’s vital components, detects and alerts you of any problem with this function. Probe II senses fan rotations, CPU temperature, and system voltages among others. With this utility, you are assure...

4-14 Chapter 4: Software support Chapter 4 Fan Speed The Fan Speed tab displays the current and threshold rotations (per minute) of the CPU, chassis, and power fans. When a fan rotation is less than the threshold rotation, the sensor sends an alert to the user through the monitor panels or a pop-up ...

ROG MAXIMUS V GENE 4-15 Chapter 4 Alert Log The Alert Log tab displays all normal and critical events detected by the sensors, including the sensor value at the time of the event. Click Clear to clear the log.

4-16 Chapter 4: Software support Chapter 4 4.3.6 Sensor Recorder Sensor Recorder monitors the changes in the system voltage, temperature, and fan speed on a timeline. The History Record function allows you to designate specific time spans on record to keep track of the three system statuses for cert...

4-18 Chapter 4: Software support Chapter 4 4.3.8 USB 3.0 Boost The ASUS exclusive USB 3.0 Boost provides speed boost for USB 3.0 devices and the up-to-date support of USB Attached SCSI Protocol (UASP). With USB 3.0 Boost, you can accelerate the transfer speed of your USB 3.0 devices with ease. Launc...

ROG MAXIMUS V GENE 4-19 Chapter 4 4.3.9 Monitor Monitor This section includes the Sensor and CPU Frequency functions. Sensor The sensor panel displays the current value of a system sensor such as fan rotation, CPU temperature, and voltages. Click Monitor > Sensor on the AI Suite II main menu bar ...

ROG MAXIMUS V GENE 4-21 Chapter 4 4.3.11 MyLogo2 This MyLogo utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On-Self-Tests (POST). Personalize your computer from the very beginning! Launching ASUS Update After installing AI Suite II from t...

4-22 Chapter 4: Software support Chapter 4 2. Click on Auto Tune to adjust image size compatibility or adjust the resolution bar. 3. You can click on Booting Preview to preview the boot image. Then click Next. 4. Click on Flash to start updating the image to the boot logo. 5. Click on Yes to reboot ...

ROG MAXIMUS V GENE 4-23 Chapter 4 4.3.12 System Information The System Information section displays the information about the motherboard, CPU, and memory slots. Click the MB tab to see the details on the motherboard manufacturer, product name, version, and BIOS. • Click the CPU tab to see the detai...

4-24 Chapter 4: Software support Chapter 4 4.3.13 Audio configurations The Realtek ® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer. The software provides Jack-Detection function, S/PDIF Out support, and interrupt capability. The CODEC also ...

ROG MAXIMUS V GENE 4-25 Chapter 4 4.3.14 ROG Connect ROG Connect allows you to monitor and adjust the local PC through your remote PC. Setting up USB connection between your local and remote PC • Install ROG Connect on the remote PC from the provided Support DVD before using ROG Connect. • ROG Conne...

4-26 Chapter 4: Software support Chapter 4 RC Poster RC Poster shows the status of the local system during the POST. You can switch the display mode between String and Code . RC Remote RC Remote allows you to operate your local system through the ROG Connect cable. RC Diagram RC Diagram allows you t...

ROG MAXIMUS V GENE 4-27 Chapter 4 GPU TweakIt GPU TweakIt allows you to control and monitor the installed GPU on the local system. Use the sliders to adjust the values and click Apply to save your customized settings.

4-28 Chapter 4: Software support Chapter 4 4.3.15 Sound Blaster X-Fi MB 2 This application is available only under Windows Vista and Windows 7 operating system. This installation requires that you have the latest version of the Windows Media Player installed on your system. Ensure to download and in...

ROG MAXIMUS V GENE 4-29 Chapter 4 Using Sound Blaster X-Fi MB 2 Speaker and Headphone EAX Equalizer Mixer THX Adjusting Volume Restoring to the Default Mute Speaker and Headphone You can adjust the speaker-related or the headphone- related configurations. Environment audio extensions (EAX) After ena...

4-30 Chapter 4: Software support Chapter 4 Equalizer You can manually adjust the audio frequency with the equalizer and customize your presets for later use. Mixer You can manually adjust the audio volumes, including Line In, Stereo Mix and Microphone, when recording or during the playback. THX THX ...

ROG MAXIMUS V GENE 4-31 Chapter 4 4.4 RAID configurations The motherboard supports the following SATA RAID solutions: Intel ® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • You must install Windows ® XP Service Pack 3 or later versions before using Serial ATA hard disk d...

4-32 Chapter 4: Software support Chapter 4 4.4.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration...

ROG MAXIMUS V GENE 4-33 Chapter 4 Creating a RAID set To create a RAID set:1. From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>. 3. When the RAID Level item is selected, press the u...

4-34 Chapter 4: Software support Chapter 4 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. 6. Use the up/down arrow key to select the stripe size for the RAID array...

ROG MAXIMUS V GENE 4-35 Chapter 4 Deleting a RAID set Take caution when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set:1. From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appea...

4-36 Chapter 4: Software support Chapter 4 4.4.5 Introduction to Intel ® 2012 Desktop responsiveness technologies This document details the overview of the installation and configuration procedures of the Intel ® 2012 Desktop responsiveness technologies. Intel ® 2012 Desktop responsiveness technolog...

4-38 Chapter 4: Software support Chapter 4 Intel ® Smart Response Technology Intel ® Smart Response Technology boosts overall system performance. It uses an installed fast SSD (min. 20GB available) as a cache for frequently accessed operations, speeding up hard drive/main memory interaction. Key ben...

ROG MAXIMUS V GENE 4-39 Chapter 4 >= • To enable Intel ® Smart Response Technology, you need at least one SSD ( 20GB) and a HDD, and only one SSD can be assigned for caching. • If you want to restore the OS, go to BIOS Option ROM > Acceleration Options and remove the Disks/Volume Acceleration ...

4-40 Chapter 4: Software support Chapter 4 If your SSD is smaller than 64GB, and is set to Full disk capacity caching option for Intel ® Smart Response, you can not see any volume in the Disk Management. Ensure to set your cache memory value of 18.6GB in Intel ® Smart Response to allow enough capaci...

ROG MAXIMUS V GENE 4-41 Chapter 4 • The value “ x ” refers to a disk number where you want to create the store partition. • The value “ x ” refers to a disk number where you created the unallocated partition. • Refer to step 5 for details about the unallocated disk space in the SSD. 9. Type create p...

4-42 Chapter 4: Software support Chapter 4 Enabling and disabling the Intel ® Rapid Start Technology under the OS Install the Intel ® Rapid Start Technology first from your support DVD in order to launch the Intel ® Rapid Start Manager. After creating the partition, launch the Intel ® Rapid Start Ma...

ROG MAXIMUS V GENE 4-43 Chapter 4 The value “ x ” refers to a disk number where you want to delete the store partition. Click to enable or disable battery saving mode. This function only applies to notebooks. Select and click to enable or disable the function Click to enable or disable the timer. Wh...

4-44 Chapter 4: Software support Chapter 4 The value “ x ” refers to a disk number where you want to delete the store partition. 5. Type list partition , press Enter, and select the partition where the Intel ® Rapid Start Technology is installed by typing select partition x (x = number), and press E...

ROG MAXIMUS V GENE 4-45 Chapter 4 10. Click Next after selecting the default selected disk. 11. Extend volume setup is completed. Click Finish to recover the Intel ® Rapid Start Technology partition. 12. Reboot the system after deleting the partition.13. Go to Start > Control Panel > Programs ...

4-46 Chapter 4: Software support Chapter 4 6. Click Install to proceed the installation. 7. Click Yes to restart your system, and for the newly installed Intel ® Smart Connect Technology to take effect. 5. Select all and click Next for Custom Setup . Using the Intel ® Smart Connect Technology • Befo...

ROG MAXIMUS V GENE 4-47 Chapter 4 5. In the Help tab, click About to view the feature’s version. Click Topics to learn more about the Intel ® Smart Connect Technology and its configuration. 4. In the Advanced tab, set up the schedule during low power usage time period for power saving. This setting ...

4-48 Chapter 4: Software support Chapter 4 4.5 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing a Windows ® operating system on a hard disk drive that is included in a RAID set. • The motherboard does not provide a floppy drive connector. You have to use a U...

ROG MAXIMUS V GENE 4-49 Chapter 4 4.5.3 Installing the RAID driver during Windows ® OS installation To install the RAID driver in Windows ® XP: 1. During the OS installation, the system prompts you to press the F6 key to install third- party SCSI or RAID driver. 2. Press <F6>, and then insert ...

4-50 Chapter 4: Software support Chapter 4 4.5.4 Using a USB floppy disk drive Due to OS limitation, Windows ® XP may not recognize the USB floppy disk drive when you install the RAID driver from a floppy disk during the OS installation.To solve this issue, add the USB floppy disk drive’s Vendor ID ...

ROG MAXIMUS V GENE 4-51 Chapter 4 8. Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem file. 9. Type the following line to the bottom of the two sections: id = “USB\VID_xxxx&PID_xxxx”, “usbstor” 10. Sav...

ROG MAXIMUS V GENE 5-1 Chapter 5 5.1 ATI ® CrossFireX™ technology The motherboard supports the ATI ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.1.1 Requirements • In Dual CrossFireX mod...

5-2 Chapter 5: Multiple GPU technology support Chapter 5 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. Connect a VGA or a DVI cable to the graphics card. 4. Align and firmly insert the CrossFireX bridge connector to the goldfingers ...

ROG MAXIMUS V GENE 5-3 Chapter 5 5.1.4 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the ATI ® CrossFireX™ technology. Download the latest driver from the AM...

ROG MAXIMUS V GENE 5-5 Chapter 5 4. Align and firmly insert the SLI bridge connector to the goldfingers on each graphics card. Ensure that the connector is firmly in place. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. Connect a VGA...

5-6 Chapter 5: Multiple GPU technology support Chapter 5 B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize . B2. From the Personalization window, select Display Settings . B3. From the Display Settings dialog box, click Advanced Settings .

ROG MAXIMUS V GENE 5-7 Chapter 5 B4. Select the NVIDIA GeForce tab, and then click Start the NVIDIA Control Panel . B5. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window, select Set SLI Configuration . Click Enable SLI and set the display for viewing...

5-8 Chapter 5: Multiple GPU technology support Chapter 5 5.3 LucidLogix Virtu MVP LucidLogix Virtu MVP allows your computer’s VGA output and discrete graphic cards to perform better, respond faster and process media files smoother within a low power environment. Its GPU virtualization assigns tasks ...

ROG MAXIMUS V GENE 5-9 Chapter 5 i-Mode To use LucidLogix Virtu MVP in i-Mode, the display must be connected to the onboard video output. Ensure to set the Primary Display to iGPU in BIOS to activate i-Mode support. d-Mode To use LucidLogix Virtu MVP in d-Mode, the display must be connected to the i...

5-10 Chapter 5: Multiple GPU technology support Chapter 5 5.3.3 Configuring LucidLogix Virtu MVP Launch the Virtu MVP Control Panel to allow you to configure the main features, adjust the performance settings and select applications for graphical virtualization.To open the control panel, right-click...

ROG MAXIMUS V GENE 5-11 Chapter 5 Click to turn Hyperformance® ON or OFF Click to turn Virtual Vsync ON or OFF Performance Allows you to turn ON/OFF the Hyperformance ® or Virtual Vsync function.

5-12 Chapter 5: Multiple GPU technology support Chapter 5 See the descriptions of these columns below: D column allows you to run applications with the discrete graphic card. Select D to enable 3D graphical performance for that application. I column allows to run applications with iGPU. Select I for...

ROG MAXIMUS V GENE A-1 Appendices Appendices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:• This device may not cause harmful interference.• This device must accept any interference received inclu...

A-2 Appendices Appendices VCCI: Japan Compliance StatementVCCI Class B Statement KC: Korea Warning Statement Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Re...

ROG MAXIMUS V GENE A-3 Appendices RF Equipment Notices CE: European Community Compliance Statement The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300 GHz). Th...

A-4 Appendices Appendices RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operat...

ROG MAXIMUS V GENE A-5 Appendices Wireless Operation Channel for Different Domains N. America 2.412-2.462 GHz Ch01 through CH11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13 France Restricted Wireless Frequency Bands Some areas of France have a restricted freq...

A-6 Appendices Appendices IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during...

ROG MAXIMUS V GENE A-7 Appendices ASUS contact information ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail [email protected] Web site www.asus.com.tw Technical Support Telephone +86-21-38429911 Online support support.as...

A-8 Appendices Appendices ಄ӝ܄ᖂܴਜ Declaration of Conformity ൔᡍက୍ΓǺ๮ᅺႝတިҽԖज़Ϧљ Obligatory Applicant Ӧ֟ǺѠчѱч׫୔ҥቺၡ 150 ဦ 4 ኴ Address ႝ၉Ǻ 02-2894-3447 # 2521 Telephone ୘ࠔύȐमȑЎӜᆀǺЬᐒ݈ (Motherboard) Commodity Name ୘ࠔࠠԄȐ܈ࠠဦȑǺ Maximus V GENE Commodity Type Ȑ Model ȑ ಄ӝϐᔠᡍ኱ྗϷހԛǺ CNS 13438 : 95 ԃֹ᏾ހ ( Όᜪ ) (Clas...

ROG MAXIMUS V GENE A-9 Appendices EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 4088...

A-10 Appendices Appendices DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont , CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Numbe...