Asus E500-PIB- Manuals

Page 2 - Customer Service; for latest SUS revisions.; Important Information

i • Schlage • Schlage Utility Software User's Guide Customer Service U.S.A.: 877-671-7011www.schlage.com/support Copyright ©2015 Allegion Revision This document has been updated for SUS Rev 6.1.1(a).Check www.schlage.com/support for latest SUS revisions. Important Information

Page 3 - Warranty; LIMITED WARRANTY: COMMERCIAL APPLICATIONS

ii • Schlage • Schlage Utility Software User's Guide Warranty Important Information Warranty LIMITED WARRANTY: COMMERCIAL APPLICATIONS 12 Month Limited Warranty Schlage Lock Company (the “Company”) extends a 12 month limited warranty from the original date of purchase to the Original User of the pro...

Page 4 - Contents

iii • Schlage • Schlage Utility Software User's Guide Contents i Important Information i Customer Service i Copyright i Revision ii Warranty 1 Overview 1 Supported Devices 2 SUS Functions by Device 3 Getting Started 4 Synchronization Software 9 Install/Update Schlage Utility Software 10 Icon Definit...

Page 5 - used to configure, edit and program all supported devices.; Supported Devices; Locks and Controllers; Overview

1 • Schlage • Schlage Utility Software User's Guide The Schlage Utility Software is an application that runs on the Schlage Handheld Device (HHD). It is used to configure, edit and program all supported devices. Supported Devices Locks and Controllers HHD Model CompatiblityBM-150 BM-170 AD- S erie s...

Page 6 - SUS Functions by Device

2 • Schlage • Schlage Utility Software User's Guide SUS Functions by Device Overview SUS Functions by Device AD-Series Devices AD- 200 2 AD- 250 AD- 300 2 AD-400 2 C T5000 PIB300 PIM400 WPR400 1 WRI400 1 Collect Audits • • • Edit Lock Properties • • • • • Edit PIB300 properties • Edit PIM400 propert...

Page 7 - Quick Start; Getting Started

3 • Schlage • Schlage Utility Software User's Guide The Schlage Utility Software (SUS) is a software application that runs on a Windows CE based handheld device. It is used to transfer data files between the access control software and locks and controllers. Quick Start To begin using the SUS, revie...

Page 8 - Synchronization Software; About Synchronization Software; connected to the computer.; This software may already be installed on your computer.; Download and Install Synchronization Software; Download the software that matches your operating system.; Launch the installer and follow the on-screen instructions.

4 • Schlage • Schlage Utility Software User's Guide Synchronization Software Getting Started Synchronization Software About Synchronization Software Synchronization software is software that your computer uses to interface and synchronize with the handheld device. This software is used to install an...

Page 9 - Configure Synchronization Software; Connect the handheld device to

5 • Schlage • Schlage Utility Software User's Guide Synchronization Software Getting Started Configure Synchronization Software Microsoft ActiveSync 1 Connect the handheld device to the computer’s USB port. The Synchronization Setup Wizard will appear. 2 Click the Next button. 3 Uncheck the check bo...

Page 10 - Open the Windows Mobile Device Center

6 • Schlage • Schlage Utility Software User's Guide Synchronization Software Getting Started Microsoft Windows Mobile Device Center 1 Open the Windows Mobile Device Center from the computer. 2 Connect the handheld device to your computer’s USB port. 3 Click Setup your device . 3 4 Click to uncheck a...

Page 11 - Locate the Synchronization Folder; Microsoft ActiveSync; If Microsoft ActiveSync does not; In the bottom half of the ActiveSync; This path may extend beyond the; To ensure the path is entered into the; Synchronization

7 • Schlage • Schlage Utility Software User's Guide Synchronization Software Getting Started Locate the Synchronization Folder The synchronization software looks in this folder for files that should be synchronized with the handheld device. When you configure your access control software, you need t...

Page 12 - If Microsoft Windows Mobile Device is not; Connect the Handheld Device to the PC; into the computer’s USB port.

8 • Schlage • Schlage Utility Software User's Guide Synchronization Software Getting Started Microsoft Windows Mobile Device Center 1 If Microsoft Windows Mobile Device is not already open, click on Start > Programs > Microsoft Windows Mobile Device Center . 2 Click Set up your device . 2 3 Cl...

Page 13 - Install/Update Schlage Utility Software; revision of the software.

9 • Schlage • Schlage Utility Software User's Guide Install/Update Schlage Utility Software Getting Started Install/Update Schlage Utility Software Although SUS is already installed on your handheld device, you should make sure you have the latest revision of the software. 1 Download the installer (...

Page 14 - Icon Definitions

10 • Schlage • Schlage Utility Software User's Guide Lock Non-Lock Device New lock data file has not been updated Lock update completed Information Warning Error Information is being exchanged with the device Firmware Package Icon Definitions

Page 15 - Manager; Start the Schlage Utility Software; Start; SUS Password; on page 14 for more information.; on page 14 for more information.; Log in as a; Log in as; Logging In

11 • Schlage • Schlage Utility Software User's Guide You can log in to the Schlage Utility Software (SUS) as either a Manager or an Operator. The Manager role has access to all commands. The Operator role has access only to limited commands. Manager Operator Lock Properties • • Program Lock • • Firm...

Page 16 - Log in as a Manager; Choose; Choose

12 • Schlage • Schlage Utility Software User's Guide Log in as a Manager Logging In Log in as a Manager 1 If you have not already started the Schlage Utility Software, do so now. Î See Start the Schlage Utility Software on page 11 for more information. 2 Choose Manager from the drop-down list. 3 Ent...

Page 17 - Connection Type; Manual Update is recommended when managing Legacy Locks.; Schlage Utility Software Options

13 • Schlage • Schlage Utility Software User's Guide Connection Type AD-Series devices communicate with the SUS via USB connection. Legacy devices communicate with the SUS via Serial connection 1 . Select this option to match the device type to which you are connecting. If you have both types of dev...

Page 18 - You must be logged in to a role to change the password for that role.; Language; Select; Device Template Feature; settings across multiple devices.

14 • Schlage • Schlage Utility Software User's Guide SUS Password Schlage Utility Software Options SUS Password You must be logged in to a role to change the password for that role. 1 Select SUS Options . 2 Select SUS Password . 3 Enter the old password into the Old Password box. 4 Enter the new pas...

Page 19 - Connecting the Handheld Device; USB Cable; AD-Series Controllers; If using a BM-150, make sure the HHD is in USB Connection Mode. See; Connecting the HHD

15 • Schlage • Schlage Utility Software User's Guide Connecting the Handheld Device AD-Series and CO-Series Locks 1 Start the Schlage Utility Software. 2 If using a BM-150, make sure the HHD is in USB Connection Mode. See Connection Type on page 13 for more information. 3 Connect the USB cable to th...

Page 20 - Start the Schlage Utility Software.; on page 13 for more; on page 13 for more

16 • Schlage • Schlage Utility Software User's Guide Connecting the Handheld Device Connecting the HHD Legacy CM and CL Locks (BM-150 Only) 1 Start the Schlage Utility Software. 2 Make sure the HHD is in Serial Connection Mode. See Connection Type on page 13 for more information. 3 Connect the seria...

Page 22 - Supported Locks; All chassis for the following models are; Couple HHD to Lock; password will automatically couple with the lock.; on page 13 for more information.; Device Options; AD-Series Locks and Controllers

18 • Schlage • Schlage Utility Software User's Guide Supported Locks All chassis for the following models are supported. AD-Series Offline AD-200AD-201 AD-250 AD-Series Networked AD-300AD-301 AD-400AD-401 Supported ControllersPIM400 (Panel Interface Module)WRI400 (Wireless Reader Interface)WPR400 (W...

Page 23 - HHDs with the same coupling password can program the

19 • Schlage • Schlage Utility Software User's Guide Couple HHD to PIM400 or PIB300 AD-Series Locks and Controllers Couple HHD to PIM400 or PIB300 AD-Series devices can be coupled, or authenticated, with the HHD. This provides enhanced security by ensuring that the device will only communicate with ...

Page 24 - Program a Lock or Controller; Offline Locks; Select; Online Locks; Collect Audits and Update Lock; Collect Audits when Date/Time and Lock Access Rights are Up-to-Date; Click

20 • Schlage • Schlage Utility Software User's Guide Program a Lock or Controller AD-Series Locks and Controllers Program a Lock or Controller Offline Locks 1 Connect the HHD to the lock or controller and establish communication between the HHD and the device. 2 Select Device Options . 3 Select Prog...

Page 25 - View Properties

21 • Schlage • Schlage Utility Software User's Guide View Properties AD-Series Locks and Controllers Collect Audits when Date/Time and Lock Access Rights are Not Up-to-Date 1 Confirm HHD is connected to lock. Î See Connecting the Handheld Device on page 15 for more information. 2 Double-click the di...

Page 26 - View Reader Properties

22 • Schlage • Schlage Utility Software User's Guide View Reader Properties AD-Series Locks and Controllers View Reader Properties 1 Connect the HHD to the device. 2 Select Device Options . 3 Select Properties for the connected device. 4 Select the Reader tab. Î See Lock Properties on page 23 for mo...

Page 27 - Lock Properties; VIEW T

23 • Schlage • Schlage Utility Software User's Guide Lock Properties AD-Series Locks and Controllers Lock Properties • AD-200/250 (Offline Locks): pg 23• AD-300 (Networked Locks): pg 26• AD-400 (Networked Locks): pg 29 AD-200/250 (Offline Locks) VIEW T ab Property Description Lock Name The name of t...

Page 37 - Controller Properties

33 • Schlage • Schlage Utility Software User's Guide Controller Properties AD-Series Locks and Controllers Controller Properties • WPR400: pg 33• PIM400 -TD2, -485, -VBB (PIM PROPERTIES): pg 36• PIM400 -TD2, -485, -VBB (LOCK PROPERTIES): pg 37• PIB300: pg 41• WRI400: pg. (page 42) • CT5000: pg. (pag...

Page 50 - All chassis for the following models are supported.; Connect the HHD to the lock using the HH-USB cable.; Program a Lock

46 • Schlage • Schlage Utility Software User's Guide Supported Locks All chassis for the following models are supported. CO-Series Locks CO-200 CO-220 CO-250 Couple HHD to Lock CO-Series locks can be coupled, or authenticated, with the HHD. This provides enhanced security by ensuring that the lock w...

Page 51 - Collect Audits; Update Mode

47 • Schlage • Schlage Utility Software User's Guide Collect Audits CO-Series Locks Collect Audits When Auto Update is enabled, as soon as the Schlage button is pressed twice and the communication with the Schlage Utility Software starts, the lock will automatically: • update lock’s date/time • coll...

Page 55 - Supported Legacy Locks; Controller; Connect the HHD to the lock using the HH-Serial Cable and CIP.; on page 15 for more information.; credential to the lock.; Select

51 • Schlage • Schlage Utility Software User's Guide Supported Legacy Locks KC2CMCL BE367 Supported Controllers Legacy PIM WRI* WPR* WPR2* WSM* CT500/1000 ControllerCL Campus Lock Controller * These devices cannot be configured directly. They are configured through the Legacy PIM. Program a Lock or ...

Page 56 - Collect Audits and Update a Lock; See Update Mode on page 13 for more information.; If no previous audit exists, skip to step 7.; YES

52 • Schlage • Schlage Utility Software User's Guide Collect Audits and Update a Lock Legacy Locks and Controllers (BM-150 Only) Collect Audits and Update a Lock When Auto Update is enabled, as soon as the Schlage button is pressed twice and the communication with the Schlage Utility Software starts...

Page 58 - Update Firmware

54 • Schlage • Schlage Utility Software User's Guide Update Firmware Legacy Locks and Controllers (BM-150 Only) Update Firmware 1 Connect the HHD to the device you want to update. Î See Connecting the Handheld Device on page 15 for more information. 2 Select Device Options . 3 Select Firmware Update...

Page 59 - Diagnostics

55 • Schlage • Schlage Utility Software User's Guide Diagnostics Legacy Locks and Controllers (BM-150 Only) Diagnostics Test Mode can be used for troubleshooting. 1 Connect the HHD to the controller. Î See Connecting the Handheld Device on page 15 for more information. 2 Select Device Options . 3 Se...

Page 60 - General Troubleshooting; Make sure you are using the correct connection type. See; Troubleshooting

56 • Schlage • Schlage Utility Software User's Guide General Troubleshooting If you are having trouble with the SUS and/or the handheld device, please check the following before contacting customer support: 1 The programming cable must be properly connected to the lock and the handheld device. 2 Mak...

Page 61 - Error Codes; Error

57 • Schlage • Schlage Utility Software User's Guide Error Codes Troubleshooting Error Codes No. Error Solution E100 Enter a valid password No password was entered. Enter the correct password. E101 Incorrect password The password entered was incorrect. Enter the correct password. E102 Incorrect pass...

Page 64 - support

60 • Schlage • Schlage Utility Software User's Guide Error Codes Troubleshooting Error Codes No. Error Solution E800 Device is not in coupling mode AD series: Hold down the Interior Push Button and press the Tamper switch (sw1) 3 times.PIM400/PIB300 devices: Hold down LINK1 switch (s2) and press LIN...

Page 65 - Remove the Schlage Utility Software; On your handheld device, tab the

61 • Schlage • Schlage Utility Software User's Guide Remove the Schlage Utility Software Troubleshooting Remove the Schlage Utility Software This process will remove the Schlage Utility Software from the handheld device. 1 On your handheld device, tab the Start menu. 2 Select Settings . 3 Select the...

Page 66 - each digit is represented by four bits.; Glossary

62 • Schlage • Schlage Utility Software User's Guide BCD Acronym for Binary Coded Decimal, an encoding method for representing decimal numbers where each digit is represented by four bits. CAC Acronym for Common Access Card, a U.S. Department of Defense smart card issued as standard identification, ...

Page 67 - Acronym for Graphical User Interface.

63 • Schlage • Schlage Utility Software User's Guide Glossary FC Mode Allows access by Facility (Site) code. First The first query an access point makes to a PIM400/401 or Legacy PIM occurs immediately following a card swipe. - “First” is the amount of time, in milliseconds, an access point should w...

Page 68 - Acronym for Transaction Status Message.

64 • Schlage • Schlage Utility Software User's Guide Glossary TSM Acronym for Transaction Status Message. TWIC Acronym for Transportation Worker Indentification Credential. Request to Exit Whenever a Door is opened from the safe side a request to exit is required. In the simplest version this means ...

Page 69 - Appendix A: SUS Update Guide

65 • Schlage • Schlage Utility Software User's Guide Follow the steps listed on this guide to update your SUS software to the latest version provided. 1 Browse to www.schlage.com/support . 2 Click the Access Control Software & Control Panels tab. 3 Click Schlage Utility Software . 4 Click View u...

Page 71 - Supported Products; AD-Series and CO-Series Device Firmware Update; Windows XP; on page 4 for more information.; “Couple HHD to Lock”; Click; Appendix B: Device Firmware Update

67 • Schlage • Schlage Utility Software User's Guide AD-Series On-Line Devices: Over Network Reprogramming (ONR). Supported Products PIM400-485-RSI, PIM400-485-VBB, AD-300/301 when wired by RS-485 to the ACP, AD-400/401 when linked to a PIM400-485. Devices must have been updated to A.D.A.60 or later...

Page 73 - Windows Vista and Windows 7

69 • Schlage • Schlage Utility Software User's Guide AD-Series and CO-Series Device Firmware Update Appendix B: Device Firmware Update Windows Vista and Windows 7 Prerequisites • Microsoft Windows Mobile Device Center should be installed on your PC. Î See Synchronization Software on page 4 for more ...

Page 74 - and paste it inside the root folder (; 0 Go to the device and connect the HHD.; at the bottom of the screen.; 5 Select the firmware package you would like to use and click; indicating the firmware update was successful will appear.

70 • Schlage • Schlage Utility Software User's Guide AD-Series and CO-Series Device Firmware Update Appendix B: Device Firmware Update 7 Copy the “.ffp” firmware file available inside the “AD firmware Pkg.zip” file (see step 3) and paste it inside the root folder ( \ ). 8 Wait for the HHD to synchro...

Page 75 - Legacy Device Firmware Update; Turn on the HHD and connect it to the

71 • Schlage • Schlage Utility Software User's Guide Legacy Device Firmware Update Appendix B: Device Firmware Update Legacy Device Firmware Update Windows XP Prerequisites • ActiveSync should be installed on your PC. Î See Synchronization Software on page 4 for more information. • HHD should have a...

Page 76 - the

72 • Schlage • Schlage Utility Software User's Guide Legacy Device Firmware Update Appendix B: Device Firmware Update 5 Copy the “.s19” firmware file available inside the .zip file (see step 1) and paste it inside the My Windows Mobile-Based Device folder. 6 Wait for HHD to synchronize.7 Disconnect ...

Page 77 - View

73 • Schlage • Schlage Utility Software User's Guide Legacy Device Firmware Update Appendix B: Device Firmware Update Windows Vista and Windows 7 Prerequisites • Microsoft Windows Mobile Device Center should be installed on your PC. Î See Synchronization Software on page 4 for more information. • HH...

Page 78 - 3 Select the firmware file you would like to use and click

74 • Schlage • Schlage Utility Software User's Guide Legacy Device Firmware Update Appendix B: Device Firmware Update 8 Go to the device and connect the HHD. Î See Connecting the Handheld Device on page 15 for more information. 9 Start the Schlage Utility software. Î See Start the Schlage Utility So...

Page 79 - Appendix C: Change Lock Class

75 • Schlage • Schlage Utility Software User's Guide AD-Series Locks Windows XP Prerequisites • ActiveSync should be installed on your PC. Î See Synchronization Software on page 4 for more information. • HHD should have a partnership with ActiveSync.• HHD should be already coupled with AD-Series dev...

Page 80 - to go to the root directory of the

76 • Schlage • Schlage Utility Software User's Guide AD-Series Locks Appendix C: Change Lock Class 6 Double click on My windows Mobile-Based Device to go to the root directory of the HHD. 6 7 Copy the “.ffp” firmware file available inside the “AD firmware Pkg.zip” file (see step 3) and paste it insi...

Page 82 - 0 Go to the lock and connect the HHD.; then click

78 • Schlage • Schlage Utility Software User's Guide AD-Series Locks Appendix C: Change Lock Class 7 Copy the “.ffp” firmware file available inside the “AD firmware Pkg.zip” file (see step 3) and paste it inside the root folder ( \ ). 8 Wait for the HHD to synchronize.9 Disconnect the HHD from compu...

Page 83 - About Device Template Feature; on page 18 for more information.; specific hardware class only. For; SUS is communicating with an AD-200 Prox lock.; Appendix D: Device Template

79 • Schlage • Schlage Utility Software User's Guide About Device Template Feature The Schlage Utility Software (SUS) version 4.10.2 (or higher) includes the Device Template feature.Users may quickly change and copy “Device Properties” settings across multiple devices so that a group of devices may ...

Page 84 - Create a Device Template

80 • Schlage • Schlage Utility Software User's Guide Create a Device Template Appendix D: Device Template Create a Device Template 1 Connect the HHD to the device with desired properties. Î If the device properties have not been programmed, configure the device properties as desired. Refer to AD-Ser...

Page 85 - See also Handheld Device; Index

81 • Schlage • Schlage Utility Software User's Guide A AD-200 2, 18, 23, 1 AD-201 , 1 AD-250 2, 18, 23, 1 AD-300 2, 18, 26, 1 AD-301 18 AD-400 , 18, 29, 1 AD-401 18 AD-Series Controllers 18 Edit Properties 21, 48 Functions 2 PIM400 Link Mode 22 Program 20, 46 Properties 33 Supported , 1 Update Firmw...

Page 87 - and Von Duprin; About Allegion

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, includi...