Asus Book Size PC System Genie- Manuals

Hardware Setup 8 N150 Wireless ADSL2+ Modem Router DGN1000 Hardware Features Before you cable your router, take a moment to become familiar with the label and the front and back panels. Pay particular attention to the LEDs on the front panel. Label The label on the bottom of the wireless modem route...

Hardware Setup 9 N150 Wireless ADSL2+ Modem Router DGN1000 Back Panel The back panel has the On/Off button and the port connections shown in the following figure: ADSL line Ethernet LAN ports Power button AC power adapter input Figure 4. Back panel port connections Viewed from left to right, the rea...

Hardware Setup 10 N150 Wireless ADSL2+ Modem Router DGN1000 Front Panel The following figure shows the status LEDs and icons on the wireless modem router front panel. Note that the Wireless and WPS icons are buttons. Power LAN Ports DSL Internet Wireless WPS Wireless On/Off button WPS On/Off button ...

Table 6. WPS Button and LED Icon LED Activity Description Icon is on the WPS button Solid green. Indicates that wireless security is enabled. Blinking green A WPS-capable device is connecting to the device. Off WPS is not enabled. See Wi-Fi Protected Setup (WPS) Method on page 35 for more informatio...

Hardware Setup 13 N150 Wireless ADSL2+ Modem Router DGN1000 ADSL Microfilters If this is the first time you have cabled a wireless router between a DSL phone line and your computer or laptop, you might not be familiar with ADSL microfilters. If you are, you can skip this section and proceed to Cable...

Hardware Setup 14 N150 Wireless ADSL2+ Modem Router DGN1000 4. Plug the router into one of the other outlets in the separate splitter. Two-Line ADSL Microfilter Use an ADSL microfilter with a built-in splitter when there is a single wall outlet that provides connectivity for both the wireless modem ...

Hardware Setup 16 N150 Wireless ADSL2+ Modem Router DGN1000 Verify the Cabling Verify that your router is cabled correctly by checking the wireless modem router LEDs. Turn on the wireless router by pressing the On/Off button on the back. • The Power LED is green when the modem router is turned on. •...

17 2 2. Router Internet Setup C o n n e c t t o t h e I n t e r n e t This chapter explains three ways to set up your Internet connection: NETGEAR Genie (recommended), Setup Wizard, or manual setup. If you have already set up your router with one of these methods, the initial router setup is complet...

Router Internet Setup 18 N150 Wireless ADSL2+ Modem Router DGN1000 Router Setup Preparation You can set up your wireless modem router with the NETGEAR Genie as described in NETGEAR Genie Setup on page 19, with the Setup Wizard as described in Setup Wizard on page 24, or manually as described in Manu...

Router Internet Setup 19 N150 Wireless ADSL2+ Modem Router DGN1000 Gather ISP Information You need the following information to set up your wireless modem router and to check that your Internet configuration is correct. Your ISP should have provided you with all the information you need to connect t...

Router Internet Setup 20 N150 Wireless ADSL2+ Modem Router DGN1000 3. When the Welcome screen displays, click Setup to start the Genie. 4. Follow the instructions to complete the setup. NETGEAR Genie checks your hardware setup and guides you through connecting the router to the Internet and adding c...

Router Internet Setup 21 N150 Wireless ADSL2+ Modem Router DGN1000 Log In to the N150 Modem Router Log in to the wireless modem router to view or change settings or to set up the wireless modem router.  To log in: 1. Type http://192.168.0.1 in the address field of your browser and press Enter to di...

Router Internet Setup 22 N150 Wireless ADSL2+ Modem Router DGN1000 Note: If you cannot connect to the wireless router, check the Internet Protocol (TCP/IP) properties in the Network Connections section of your PC Control Panel. They should be set to obtain both IP and DNS server addresses automatica...

Router Internet Setup 23 N150 Wireless ADSL2+ Modem Router DGN1000 Router Interface The router interface gives you access to the router’s current settings so you can view or change them (if needed). The left column has the router menus, and the right column provides online help. The middle column is...

Router Internet Setup 25 N150 Wireless ADSL2+ Modem Router DGN1000 Manual Setup (Basic Settings) The Basic Settings screen displays when you select No. I want to configure the Router myself in the Setup Wizard and is also available from the router menus. It is where you view or change ISP informatio...

Router Internet Setup 28 N150 Wireless ADSL2+ Modem Router DGN1000 address of that computer. This feature allows your wireless modem router to use your computer’s MAC address (this is also called cloning). Use Default Address . Use the default MAC address. Use Computer MAC Address . The wireless mod...

Router Internet Setup 29 N150 Wireless ADSL2+ Modem Router DGN1000 Unsuccessful Internet Connection If you cannot connect to the Internet, you can do one or more of the following: • Review your settings to be sure you have selected the correct options and typed everything correctly. • Contact your I...

Router Internet Setup 30 N150 Wireless ADSL2+ Modem Router DGN1000 The administrator’s login to the wireless modem router configuration times out after a period of inactivity to prevent someone else from accessing the router interface when you step away. 4. Click Apply to save your changes. After ch...

31 3 3. Wireless Settings P r o t e c t y o u r n e t w o r k This chapter describes how to use the Wireless Settings screens to view and change (if needed) your wireless network settings. Security features to prevent objectionable content from reaching your PCs are covered in Chapter 4, Security Se...

Wireless Settings 32 N150 Wireless ADSL2+ Modem Router DGN1000 Preset Security The N150 Modem Router comes with preset security. This means that the Wi-Fi network name (SSID), passphrase, and security option (encryption protocol) are preset in the factory. You can find the preset SSID and passphrase...

Wireless Settings 33 N150 Wireless ADSL2+ Modem Router DGN1000 Turn Off Wireless Connectivity You can completely turn off the wireless connectivity of the wireless modem router by pressing the Wireless On/Off button on its front panel . For example, if you use your notebook computer to wirelessly co...

Wireless Settings 34 N150 Wireless ADSL2+ Modem Router DGN1000 WEP Encryption WEP uses an old encryption method and can be easily decoded with today's powerful computers. Use this mode only when you have a very old legacy wireless client that does not support WPA-PSK. The Wi-Fi alliance highly recom...

Wireless Settings 35 N150 Wireless ADSL2+ Modem Router DGN1000 Add Clients (Devices) to Your Network Choose either the manual or the WPS method to add wireless devices, including guest devices, and other equipment to your wireless network. Manual Method 1. Open the software that manages your wireles...

Wireless Settings 36 N150 Wireless ADSL2+ Modem Router DGN1000 WPS (Push ' N ' Connect) Method If your wireless device supports WPS (Push 'N' Connect), you can use WPS.  To use WPS: 1. Press the WPS button on the router front panel . 2. Within 2 minutes, press the WPS button on your wireless device...

Wireless Settings 37 N150 Wireless ADSL2+ Modem Router DGN1000 • If a connection is established, the wireless modem router WPS screen displays a confirmation message. 4. Repeat to add another WPS client to your network. Wireless Settings Screen The Wireless Settings screen lets you view or configure...

Wireless Settings 38 N150 Wireless ADSL2+ Modem Router DGN1000 View or Change Wireless Settings Your preset router comes set up with a unique wireless network name (SSID) and network password. This information is printed on the label for your router. You can view or change these settings in the Wire...

Wireless Settings 39 N150 Wireless ADSL2+ Modem Router DGN1000 Region . The location where the wireless modem router is used. It might not be legal to operate the wireless modem router in a region other than the regions listed. Channel . The wireless channel used by the gateway: 1 through 13. Do not...

Wireless Settings 40 N150 Wireless ADSL2+ Modem Router DGN1000 Figure 9. Wireless Station Access List 2. Select the Turn Access Control On check box to enable access restriction by MAC address. 3. In the Add New Station Manually list, click Add to add your computer’s MAC address so you do not lose y...

Wireless Settings 41 N150 Wireless ADSL2+ Modem Router DGN1000 Change WPA Security Option and Passphrase  To change the WPA security option and passphrase: 1. In the Security Options section, select the WPA option you want. 2. In the Network Key field that displays when you select a WPA security op...

Wireless Settings 42 N150 Wireless ADSL2+ Modem Router DGN1000 Set WEP Encryption and Passphrase When configuring WEP from a wireless computer, you lose your wireless connection when you click Apply. You have to either configure your wireless adapter to match the wireless modem router WEP settings o...

43 4 4. Security Settings K e e p u n w a n t e d c o n t e n t o u t o f y o u r n e t w o r k This chapter explains how to use the basic firewall features of the wireless modem router to prevent objectionable content from reaching the PCs and other devices connected to your network. This chapter c...

Security Settings 44 N150 Wireless ADSL2+ Modem Router DGN1000 Keyword Blocking of HTTP Traffic Use keyword blocking to prevent certain types of HTTP traffic from accessing your network. The blocking can be always or according to a scheduled.  To block by keywords: 1. Select Security > Block Sit...

Security Settings 45 N150 Wireless ADSL2+ Modem Router DGN1000 Delete a Keyword or Domain  To delete a keyword or domain: 1. Select the keyword you want to delete from the list. 2. Click Delete Keyword and click Apply to save your changes. Specify a Trusted Computer You can exempt one trusted compu...

Security Settings 48 N150 Wireless ADSL2+ Modem Router DGN1000 Note: Only one computer at a time can use the triggered application. Inbound Rules to Permit External Host Communications In both of the preceding examples, your computer initiates an application session with a server computer on the Int...

Security Settings 49 N150 Wireless ADSL2+ Modem Router DGN1000 How Inbound Rules Differ from Outbound Rules The following points summarize the differences between inbound rules and outbound rules: • Outbound rules can be used by any computer on your network, although only one computer can use them a...

Security Settings 51 N150 Wireless ADSL2+ Modem Router DGN1000 Inbound Rule Example: A Local Public Web Server If you host a public web server on your local network, you can define a rule to allow inbound web (HTTP) requests from any outside IP address to the IP address of your web server at any tim...

Security Settings 52 N150 Wireless ADSL2+ Modem Router DGN1000 Inbound Rule Example: Allowing Video Conferencing Create an inbound rule to allow incoming video conferencing to be initiated from a restricted range of outside IP addresses, such as from a branch office. In the following figure, CU-SeeM...

Security Settings 55 N150 Wireless ADSL2+ Modem Router DGN1000 2. Use the following screen to define or edit a service. ‘ • Name . Enter a meaningful name for the service. • Type . Select the correct type for this service. If in doubt, select TCP/UDP . The options are TCP, UDP, TCP/UDP. • Start Port...

Security Settings 56 N150 Wireless ADSL2+ Modem Router DGN1000 Set the Time Zone The wireless modem router uses the Network Time Protocol (NTP) to obtain the current time and date from one of several network time servers on the Internet. You can check and set (if needed) the time zone to ensure time...

Security Settings 57 N150 Wireless ADSL2+ Modem Router DGN1000 Schedule Firewall Services If you enabled services blocking in the Block Services screen or port forwarding in the Ports screen, you can set up a schedule for when blocking occurs or when access is not restricted.  To schedule firewall ...

Security Settings 58 N150 Wireless ADSL2+ Modem Router DGN1000 Enable Security Event Email Notification To receive logs and alerts by email, provide your email information in the E-mail screen and specify which alerts you want to receive and how often.  To enable email notification: 1. Select Secur...

Security Settings 59 N150 Wireless ADSL2+ Modem Router DGN1000 Send E-Mail alerts immediately . Select the corresponding check box if you would like immediate notification of a significant security event, such as a known attack, port scan, or attempted access to a blocked site. Send Logs According t...

60 5 5. Network Maintenance A d m i n i s t e r y o u r n e t w o r k This chapter describes the wireless modem router settings for administering and maintaining the router and home network. This chapter contains the following sections: • Upgrade the Router Firmware • Manual Check for Firmware Upgra...

Network Maintenance 61 N150 Wireless ADSL2+ Modem Router DGN1000 Upgrade the Router Firmware The wireless modem router firmware (routing software) is stored in flash memory. By default, when you log in to your wireless modem router, it checks the NETGEAR website for new firmware and alerts you if th...

Network Maintenance 62 N150 Wireless ADSL2+ Modem Router DGN1000 Automatic Firmware Checking On When automatic firmware checking is on, the wireless modem router performs the check and notifies you if an upgrade is available or not as shown here. Figure 14. Firmware upgrade assistant and results scr...

Network Maintenance 64 N150 Wireless ADSL2+ Modem Router DGN1000 Manage the Configuration File The router configuration settings are stored in a configuration file (*.cfg). This file can be backed up to your computer, restored, or reverted to factory default settings. Back Up  To back up the config...

Network Maintenance 65 N150 Wireless ADSL2+ Modem Router DGN1000 Erase  To erase the configuration and restore to factory defaults: Under some circumstances (for example, if you move the router to a different network or if you have forgotten the password), you might want to erase the configuration ...

Network Maintenance 66 N150 Wireless ADSL2+ Modem Router DGN1000 View Router Status  To view the router status: 1. Select Maintenance > Router Status to display the following screen. The Router Status screen provides the status and usage information described in the following figure. 2. Fill in ...

Network Maintenance 70 N150 Wireless ADSL2+ Modem Router DGN1000 View Attached Devices The Attached Devices screen presents a table of all IP devices that the wireless modem router has discovered on the local network.  To view attached devices: 1. Select Maintenance > Attached Devices to view th...

Network Maintenance 71 N150 Wireless ADSL2+ Modem Router DGN1000 Run Diagnostic Utilities The wireless modem router has a diagnostics feature that you can use to perform the following functions: • Ping an IP address to test connectivity to see if you can reach a remote host. • Perform a DNS lookup t...

72 6 6. Advanced Settings C o n f i g u r e f o r u n i q u e s i t u a t i o n s This chapter describes the advanced features of your wireless modem router. The information is for users with a solid understanding of networking concepts who want to set the router up for unique situations such as whe...

Advanced Settings 73 N150 Wireless ADSL2+ Modem Router DGN1000 WAN Setup The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the Maximum Transmit Unit (MTU) size, and enable the wireless router to respond to a ping on the WAN (Internet) port. Select.  To set up the WAN...

Advanced Settings 76 N150 Wireless ADSL2+ Modem Router DGN1000 Note: If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the Dynamic DNS service will not work because private addresses are not routed on the Internet. LAN Setup The LAN Setup screen allows configuration of LA...

Advanced Settings 77 N150 Wireless ADSL2+ Modem Router DGN1000 IP Address . The LAN IP address of the wireless modem router. IP Subnet Mask . The LAN subnet mask of the wireless modem router. Combined with the IP address, the IP subnet mask allows a device to know which other addresses are local to ...

Advanced Settings 78 N150 Wireless ADSL2+ Modem Router DGN1000 Reserved IP Addresses Setup When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the router’s DHCP server. Reserved IP addresses should be assigned to s...

Advanced Settings 79 N150 Wireless ADSL2+ Modem Router DGN1000 Advanced Wireless Settings  To configure advanced wireless settings: 1. Select Advanced > Wireless Settings to display the following screen: Note: The advanced WPS settings section is not displayed if you selected WEP as the security...

Advanced Settings 80 N150 Wireless ADSL2+ Modem Router DGN1000 The PIN function might temporarily be disabled when the wireless modem router detects suspicious attempts to break into the wireless modem router’s wireless settings by using the wireless modem router’s PIN through WPS. You can manually ...

Advanced Settings 81 N150 Wireless ADSL2+ Modem Router DGN1000 • To allow access from a single IP address on the Internet, select Only This Computer and enter the IP address that is allowed access. • To allow access from a range of IP addresses on the Internet, select IP Address and enter a beginnin...

Advanced Settings 82 N150 Wireless ADSL2+ Modem Router DGN1000 the ISP. The ISP forwards your request to the company where you are employed, and the request is likely to be denied by the company’s firewall. In this case you have to define a static route, telling your router that 134.177.0.0 should b...

Advanced Settings 83 N150 Wireless ADSL2+ Modem Router DGN1000 b. In the Route Name field, enter a route name for this static route. This name is for identification purpose only. c. Select Private if you want to limit access to the LAN only. The static route will not be reported in RIP. d. Select Ac...

85 7 7. Troubleshooting D i a g n o s e a n d s o l v e p r o b l e m s This chapter provides information to help you diagnose and solve problems you might have with your wireless modem router. If you do not find the solution here, check the NETGEAR support site at http://support.netgear.com for pro...

Troubleshooting 86 N150 Wireless ADSL2+ Modem Router DGN1000 Router Not On When you turn the power on, the power, LAN, and DSL LEDs should light as described here. If they do not, refer to the sections that follow for help.  To check the LEDs: 1. When power is first applied, the Power LED lights. 2...

Troubleshooting 87 N150 Wireless ADSL2+ Modem Router DGN1000 • Check that you are using the 12-V DC power adapter supplied by NETGEAR for this product. If the error persists, you could have a hardware problem and should contact NETGEAR Technical Support. Power LED Is Red When the router is turned on...

Troubleshooting 88 N150 Wireless ADSL2+ Modem Router DGN1000 DSL Link LED Is Green or Blinking Green You have a good DSL connection. The service provider has connected your line correctly, and your wiring is correct. DSL Link LED Is Blinking Amber Your wireless modem router is attempting to make a D...

Troubleshooting 89 N150 Wireless ADSL2+ Modem Router DGN1000 Cannot Obtain an Internet IP Address If your wireless modem router cannot access the Internet, and your Internet LED is green or blinking green, check whether the wireless modem router can obtain an Internet IP address from the ISP. Unless...

Troubleshooting 90 N150 Wireless ADSL2+ Modem Router DGN1000 Note: Unless you connect manually, the wireless modem router does not authenticate with PPPoE or PPPoA until data is transmitted to the network. Cannot Load an Internet Web Page If your wireless modem router can obtain an IP address, but y...

Troubleshooting 91 N150 Wireless ADSL2+ Modem Router DGN1000 b. If the path is working, you see this message: “Reply from < IP address >: bytes=32 time=NN ms TTL=xxx” c. If the path is not working, you see this message: “Request timed out” If the path is not functioning correctly, you could ha...

Troubleshooting 92 N150 Wireless ADSL2+ Modem Router DGN1000 Cannot Log in If you cannot log in to the wireless modem router from a computer on your local network, check the following: • The router is plugged in and it is on. • You are using the correct login information. The login name is admin , a...

Troubleshooting 93 N150 Wireless ADSL2+ Modem Router DGN1000 Firmware Needs to Be Reloaded When you attempt to connect to the Internet, the browser might display a message similar to the one below telling you that you need to reload the router’s firmware. This means a problem has been detected with ...

98 B B. Notification of Compliance N E TG E A R W i r e l e s s R o u t e r s , G a t e w a y s , A Ps Regulatory Compliance Information Note: This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio device...

Notification of Compliance 100 N150 Wireless ADSL2+ Modem Router DGN1000 This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for ...

Notification of Compliance 101 N150 Wireless ADSL2+ Modem Router DGN1000 • For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible. • This device and its antenna(s) must not be co-located or operation in conjunction with any other anten...

Notification of Compliance 102 N150 Wireless ADSL2+ Modem Router DGN1000 Interference Reduction Table The table below shows the Recommended Minimum Distance between NETGEAR equipment and household appliances to reduce interference (in feet and meters). Household Appliance Recommended Minimum Distanc...

103 Index A AC power adapter input 9 access lists 39 accessing remote computer 45 adapter, wireless 18 addresses, DNS 27 ADSL see also DSLstatistics, viewing 68 ADSL microfilter cabling, described 14 filter, described 13 ADSL microfilters 13 ADSL settings 28 ADSLport 9 Advanced Wireless Settings scr...