Asus A3000N- Manuals

D I S A S S E M B L Y P R O C E D U R E 3 - 5 Memory Module The A3000N Series Notebook comes standard with one SO-DIMM in SO-DIMM socket. There is another expansion SO-DIMM socket for you to upgrade the total memory up to 1024MB with two 512MB SO-DIMM. Removing Memory module 1. Remove 2 screws on DD...

D I S A S S E M B L Y P R O C E D U R E 3 - 6 Wireless LAN Module The illustration below shows how to remove the Wireless LAN module. Removing Wireless LAN module 1. Remove 2 Antenna cables from Wireless LAN Module. (No.1, No.2) (White cable: AUX, Black cable: MAIN) 2. Remove the Wireless LAN module...

D I S A S S E M B L Y P R O C E D U R E 3 - 7 CPU Module The illustrations below show how to remove the CPU module from the notebook. Removing CPU 1. Remove 2 screws on the Thermal Door, (No.1, No.2) [M2*4L, (K) B-NI, NY]. 2. Lift the Thermal Door away. C P U R E M O V A L C P U 2 1

D I S A S S E M B L Y P R O C E D U R E 3 - 10 8. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the CPU. 9. Squeeze the vacuum handling pump and use it to lift the CPU away. * Don’t touch the die above the CPU. Unlock L O

D I S A S S E M B L Y P R O C E D U R E 3 - 11 ODD Module The illustration below shows how to remove the ODD module. 1. Remove 2 screws from the cover (No.1, No.2) [ M2 * 4L (K) B-NI, NY] . 2. Put the screwdriver (No. 3) here and push the ODD drive out from the NB. O D D M O D U L E 1 2 3 O D D R E ...

D I S A S S E M B L Y P R O C E D U R E 3 - 13 Keyboard The illustration below shows how to remove the keyboard Removing Keyboard 1. Remove 2 screws here (No.1, No.2) [M2 * 6L (K, D4.6) (K) B-NI, NY] 2. Turn over the NB and open the display panel. 3. Push the 3 latches in (No.1, No.2, No.3) with a p...

D I S A S S E M B L Y P R O C E D U R E 3 - 14 4. Lay the keyboard down over the Touch Pad module. *Do not remove the keyboard yet. The keyboard cable is still attached. Removing Keyboard Cable 1. Use a flexible connector tool to unlock the cable connector on both ends (no. 1). 2. Carefully pull out...

D I S A S S E M B L Y P R O C E D U R E 3 - 16 LCD Module The illustrations below show how to remove and disassemble the LCD module. The module contains LCD panel, invert, LCD hinge bracket, hinge cover, LCD front cover and LCD bottom case. Please do not disassemble the individual parts. Removing LC...

D I S A S S E M B L Y P R O C E D U R E 3 - 18 Disassembling LCD Module 1. Remove 5 rubes and 5 screws (No.1 ~ No.5) [M2.5*6L(K) (4.6) B-NI, NY] on the LCD bezel. 2. Carefully pry the inside edges of the LCD case open on all four edges with your fingers. Then, lift it away from the LCD module. L C D...

D I S A S S E M B L Y P R O C E D U R E 3 - 20 5. Remove 4 screws (no.13-16) [M2*3L(K) B-NI, NYLOK] to separate the LCD panel from the LCD back cover. 6. Remove the panel and the 2 hinge modules from the LCD back cover. 16 15 14 13

D I S A S S E M B L Y P R O C E D U R E 3 - 21 7. Remove 6 screws (no.17-22) [M2*3L(K) B-NI, NYLOK] on both sides to separate the LCD brackets from the panel. 8. Disconnect the cable on the back of LCD panel. 18 17 21 19 22 20

D I S A S S E M B L Y P R O C E D U R E 3 - 24 Top Case Module The illustrations below show how to disassemble and remove the top case module of the notebook. The module contains the top case itself, touch pad module. Removing Top Case Module 1. Remove 2 screws (no.1, no.2) [M2*4L(K) B-NI] at back s...

D I S A S S E M B L Y P R O C E D U R E 3 - 26 5. Lift it up to release the top case. Removing Touch Pad Module 1. Remove 6 screws here (No.16-21) [M2 * 3L] 2. Disconnect the FPC cable and then remove the touchpad module. T O U C H P A D M O D U L E R E M O V E 16 17 19 18 20 21

D I S A S S E M B L Y P R O C E D U R E 3 - 27 Motherboard Module The illustrations below show how to disassemble and remove the motherboard module of the notebook. The module contains the motherboard itself, modem card module. Removing Modem card 1. Remove 2 screws (no.1-2) (M2*2.5L (K) W-NI )on th...

D I S A S S E M B L Y P R O C E D U R E 3 - 28 Removing Motherboard 1. Disconnect the connector of speaker (no.4) on motherboard. 2. Remove 5 screws (no.5-9) （ M2*4L ） on motherboard. M O T H E R B O A R D R E M O V A L 4 9 8 7 5 6

D I S A S S E M B L Y P R O C E D U R E 3 - 30 Bottom Case Module The illustrations below show how to disassemble and remove the bottom case module of the notebook. The module contains the bottom case itself and speakers. Removing Speakers 1. Remove the 4 screws (no.1-4) （ M2*3L ） on both ends. 4. L...