Ask Proxima Impact 400 - Manuals

Ask Proxima Impact 400 – Manual in PDF format online.

Manuals:

Manual

Manual Ask Proxima Impact 400

Summary

Page 4 - TABLE OF CONTENTS

USER GUIDE LCD PANEL 3 TABLE OF CONTENTS 1 INTRODUCTION................................................................................... 52 MAIN FEATURES ................................................................................. 53 SUPPLIED MATERIAL ............................................

Page 7 - SUPPLIED MATERIAL; A complete set includes the following components :; OPTIONAL MATERIAL

USER GUIDE LCD PANEL 6 3 SUPPLIED MATERIAL A complete set includes the following components : 1. LCD Panel 8. Power -5, 12, 5 V 2. VGA-Cable 9. Power Cord 3. Cable-Adapt. MAC mon. 10. BatMouse Remote Control 4. Cable-Adapt. MAC comp. 11. Batteries 5. Mouse Cable 12. Attaché Case 6. Mouse Adapter PC ...

Page 8 - SETTING UP THE LCD PANEL; The following are guidelines for first time set-up:

USER GUIDE LCD PANEL 7 5 SETTING UP THE LCD PANEL Switch off all equipment before connecting the components. Be aware ofstatic electricity that may build up, especially in the dry season and whenoperating on synthetic carpets. Discharge any static electricity by touchinga metallic surface before you...

Page 9 - COMPUTER; Compatibility; TO SET UP FROM THE BATMOUSE REMOTE CONTROL :; STEP

USER GUIDE LCD PANEL 8 5.1 COMPUTER Connect the LCD panel, computer, monitor and power supply as shown inthe rear foldout. Connect cable (1) between the LCD panel and the computer. The LCD Panel can be attached to computers and supports up to1024x768 image resolutions in compressed/panning mode. Wit...

Page 10 - RGB VIDEO

USER GUIDE LCD PANEL 9 5.2 RGB VIDEO The LCD panel can project video images from Video Cassette Recorder orLaser Disk source using direct RGB connection with composite sync on H.When using the VGA-to-BNC adapter (Part# 301.111), connect the Red-Green-Blue to the RGB source and connect composite sync...

Page 12 - USING THE LCD PANEL; REMOTE CONTROL; The figure shows the different keys of the BatMouse.

USER GUIDE LCD PANEL 11 6 USING THE LCD PANEL The LCD panel has a set of connectors and controls that you need to knowin order to operate the device correctly. 6.1 REMOTE CONTROL The infrared BatMouse remote control (RC) is the main user interface tothe device. The RC is used to set the LCD panel co...

Page 14 - FRONT PANEL; CONTROL; CONNECTORS; CONNECTOR

USER GUIDE LCD PANEL 13 6.2 FRONT PANEL The front panel keyboard consists of a subset of the remote control keys. ON/OFF TUNE BRIGHT RESET CONTROL FUNCTION TUNE Adjusts the stability of the image BRIGHT Adjusts the brightness (whiteness) of the image RESET Defaults to factory settings ON/OFF LED act...

Page 15 - FEATURES; INTELLIGENT SAFECOOL SYSTEM; Technical Data; CONTRAST; Brightness

USER GUIDE LCD PANEL 14 7 FEATURES The LCD panel has a variety of different features implemented. Thischapter explains each feature in detail. 7.1.1 INTELLIGENT SAFECOOL SYSTEM The fan operation is controlled by the overhead projector light (OHP). Thissafety feature ensures that the fan is always op...

Page 16 - BRIGHTNESS; Contrast

USER GUIDE LCD PANEL 15 7.1.4 BRIGHTNESS The brightness is the amount of white in an image. The brightness isadjusted to the ambient lighting conditions. Usually, a bright, low contrastimage is preferred. Use the BRIGHT keys to adjust brightness. See also Contrast . The brightness setting is stored ...

Page 18 - PRACTICAL HINTS AND TIPS; The LCD image is completely black

USER GUIDE LCD PANEL 17 8 PRACTICAL HINTS AND TIPS This is a list of what to do when things go wrong. Check the symptomscarefully if you experience any problem. The cure may be at your hands! Always press the RESET key and observe that the LED on theLCD panel is flashing. This indicates that the LCD...

Page 19 - The remote control is not working; in the front of the LCD panel; The mouse is not working; switched on

USER GUIDE LCD PANEL 18 The remote control is not working - Check if the batteries need replacement (observe LED on panel)- Be sure to point at the projection screen or directly at the IR eye in the front of the LCD panel - You may be too far away from the panel (max. distance 7 m/ 23 feet) The mous...

Page 20 - MAINTENANCE

USER GUIDE LCD PANEL 19 9 MAINTENANCE From time to time, the housing and protection glasses may be cleanedwith a damped, non abrasive cloth, possibly using a mild detergent toremove spots. The upper protection glass is not removable, as it only needs cleaningfrom the outside (the inside is sealed to...

Page 21 - GENERAL ENVIRONMENTAL LIMITS

USER GUIDE LCD PANEL 20 The technical data may change without prior notice in order to improve theproduct performance. The apparatus is designed for indoor use and should not be operatedoutside the general environmental limits, as this may lead to permanentdamage and violation of any warranties. GEN...

Page 22 - DISPLAY UNIT

USER GUIDE LCD PANEL 21 DISPLAY UNIT Full color (RGB) unit connecting directly to external video sources. SIZE 310 x 310 x 42 mm12.2 x 12.2 x 1.65 inch WEIGHT 2150 grams4.7 pounds LCD CELL Active matrix TFT COLOR RESOLUTION 16.7 million RESPONSE TIME 30 ms CONTRAST RATIO 100:1 PIXEL RESOLUTION 800 x...

Page 24 - COMPATIBILITY; MODE

USER GUIDE LCD PANEL 23 COMPATIBILITY The unit is predefined for the following interfaces. In addition, the user canconfigure the panel for other interfaces with a total maximum of 40definitions altogether (predefined and user defined). MODE RESOLUTION MAX VERTICALFREQUENCY GENERIC 640x350640x400640...

Page 25 - 2 CONNECTORS; The pinouts of all external connectors are described.; POWER; This connector feeds regulated DC power to the panel.; MOUSE; This connector is used for mouse control.

USER GUIDE LCD PANEL 24 12 CONNECTORS The pinouts of all external connectors are described. POWER This connector feeds regulated DC power to the panel. 1 4 2 5 3 5 PIN DINFEMALE(FRONT VIEW) 12345 GNDGND+5VDC-5VDC+12VDC MOUSE This connector is used for mouse control. 8 PIN MINIDINFEMALE(FRONT VIEW) 1...

Page 26 - 3 FCC STATEMENT; INSTRUCTIONS TO USER; Reorient the receiving antenna.

USER GUIDE LCD PANEL 25 13 FCC STATEMENT This equipment has been certified to comply with the limits for a Class Acomputing device, pursuant to Subpart J of Part 15 of FCC rules. Onlyperipherals (computer input/output devices, terminals, printers, etc.)certified to comply with the Class A limits may...

Page 27 - 4 ENVIRONMENTAL STATEMENT; ITEM

USER GUIDE LCD PANEL 26 14 ENVIRONMENTAL STATEMENT This product is manufactured to minimize the stress and pollution of thesurroundings. Where possible, recyclable materials are used. ITEM RECYCLING / HANDLING PACKAGING Only recyclable materials are used MECHANICS Only recyclable plastics and metal ...

Page 28 - 5 SERVICE INFORMATION; RMA

USER GUIDE LCD PANEL 27 15 SERVICE INFORMATION In cases where a problem cannot be solved by the assistance of yourdealer, please call the following number to get an RMA (Return Authorization Number) : +47 69 34 01 55 (Norway) To return the defective unit, package well (preferably using the originalp...

Page 30 - 6 CONNECTION LAYOUT; The foldout shows how to connect the LCD panel to the computer.

USER GUIDE LCD PANEL 29 16 CONNECTION LAYOUT The foldout shows how to connect the LCD panel to the computer. 1. VGA Cable 2. Mouse Cable 3. Power Supply 4. Cable-Adapter MAC-mon. 5. Cable-Adapter MAC-comp. * or other applicable comp./mon. adapters 6. Applicable Mouse Adapters