Ariston OK 897E LSC AUS - Manuals

Page 2 - Positioning; Installation

2 AUS ! Before placing your new appliance into operation please read these operating instructions carefully. Ifthe appliance is sold, given away or moved, pleasemake sure the booklet is also passed on to the newowners so that they may benefit from the advicecontained within it. ! Please keep these o...

Page 3 - Electrical connection

3 AUS Electrical connection ! Ovens equipped with a three-pole power supply cable are designed to operate with alternatingcurrent at the voltage and frequency indicated onthe data plate located on the appliance ( see below ). Fitting the power supply cable 1. Open the terminal board by inserting a s...

Page 4 - Description of the appliance; Overall view; Display

4 AUS Description of the appliance Overall view Control panel SELECTOR knob THERMOSTAT / TIMER knob DISPLAY TIMER icon MINUTE MINDER icon CONTROL PANEL LOCKED icon LIGHT icon CONTROL PANELPOWER BUTTON START /STOP Control panel RACK shelf DRIPPING PAN shelf GUIDE RAILS for the sliding racks position ...

Page 5 - Oven structure; Control panel lock

5 AUS Start-up and use Oven structure The Openspace oven has a capacity of 70 litres andoffers users the option of cooking on 4 shelves atthe same time or cooking large quantities whichwould not necessarily be possible in a traditionaloven. Thanks to the ExtraLarge Space, Openspace offers10 cooking ...

Page 6 - Restoring the factory settings

6 AUS minder is on. The DISPLAY will show the countdown. To cancel the minute minder, press the button and use the knob to set the time to 00:00. Press button again. The icon will switch off to indicate that the minute minder has been disabled. Cooling ventilation In order to cool down the external ...

Page 7 - Manual cooking modes; Modes

7 AUS ! In order to guarantee wonderfully soft and crunchy foodstuffs, the oven releases – in the form of watervapour - the humidity naturally withheld in the fooditself. In this way, optimal cooking results can beachieved for all types of food. ! Every time the oven is switched on, it suggests the ...

Page 8 - Automatic cooking modes

8 AUS Automatic cooking modes ! The temperature and the cooking duration are pre-set values, guaranteeing a perfect result every time - automatically. These values are set using the C.O.P.® (Programmed Optimal Cooking) system. The cooking cycle stops automatically and the ovenindicates when the dish...

Page 9 - Programming cooking; Practical cooking advice

9 AUS Programming cooking ! A cooking mode must be selected before programming can take place. Cooking can also beprogrammed for the various cavities. Programming the cooking duration 1. Press the button until the icon and the numerical digits on the display begin to flash.2. Turn the TIMER knob tow...

Page 11 - Precautions and tips; General safety; Disposal

11 AUS Precautions and tips ! This appliance has been designed and manufactured in compliance with international safetystandards. The following warnings are provided forsafety reasons and must be read carefully. General safety • The appliance was designed for domestic use inside the home and is not ...

Page 12 - Switching the appliance off; Replacing the light bulb; Care and maintenance

12 AUS Switching the appliance off Disconnect your appliance from the electricitysupply before carrying out any work on it. Cleaning the appliance • Slight differences in colour on the front of the oven are due to the different materials used, i.e. glass,plastic or metal. • Any shady areas resemblin...

Page 13 - Troubleshooting; Problem

13 AUS Troubleshooting Problem Possible cause Solution The appliance has just been connected to the electricity mains or there has been a blackou Set the clock. A programmed cooking mode does not start. There has been a blackout. Reprogram the cooking mode. Only the high luminosity “Clock button” is...

Page 14 - Assistance

14 AUS Warning: The appliance is fitted with an automatic diagnostic system which detects any malfunctions. Malfunctions aresignalled through messages of the following type: “F—” followed by numbers.Call for technical assistance in the event of a malfunction. Before calling for Assistance: • Check w...