Page 3 - Contents; Starting and programmes, 6
Contents Installation, 2-3 Unpacking, 2Remove the transit fixings, 2Levelling, 2Water connections, 2Drainage and electrical connections, 3Technical details, 3 Washing machine description, 4-5 Control panel, 4LEDs, 5 Starting and programmes, 6 Briefly: how to start a programme, 6Programme table, 6 Pe...
Page 4 - Installation; Unpacking; Levelling
Installation 2 ! Keep this instruction manual in a safe place forfuture reference. Should the appliance be sold,transferred or moved, make sure the instructionmanual accompanies the washing machine toinform the new owner as to its operation and features. ! Read these instructions carefully: they con...
Page 5 - Drainage connections; Technical Details
Installation 3 Drainage connections A. Connect the drain hose, without kinking it, to a draining duct or a wall drain fixed at a height between 65 and 100cm from the floor. B. Alternatively, place it over the edge of a basin, sink or tub, fastening the hose supplied to the tap.The free end of the ho...
Page 6 - Washing machine description; Control panel
Washing machine description 4 Control panel Detergent dispenser:To add detergent and fabric softener (see page 8). Programme key:To consult a straightforward chart of the differentprogrammes available. Pull the grey tab outwards toopen it. LEDs:To find out which wash cycle phase is under way.If the ...
Page 7 - LEDs
Washing machine description 5 LEDs ON-OFF/DOOR LOCK Led: If this LED is on, the appliance door is locked to prevent it from being opened accidentally; to avoidany damage. Wait for the LED to flash before youopen the appliance door. ! The rapid flashing of the ON-OFF/DOOR LOCKLED together with the fl...
Page 8 - Starting and Programmes; Briefly: starting a programme; Programme table; Notes
Starting and Programmes 6 Type of fabric and degree of soil Cottons Synthetics Description of washing cycle Programmes Wash Temperature Detergent Pre-wash Wash Fabric softener Cycle length (minutes) Briefly: starting a programme 1. Switch the washing machine on by pressing button , for at least 2 se...
Page 9 - Personalisation; Setting the temperature; Functions
Personalisation 7 Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).The temperature can be lowered, or even set to cold wash ( ). Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the programme selected. The maximum ...
Page 10 - Detergents and laundry; Detergent dispenser; Special items; Quilted coats and windbreakers:
Detergents and laundry 8 Detergent dispenser Good washing results also depend on the correctdose of detergent: adding too much detergent won’tnecessarily make for a more efficient wash, andmay in fact cause a build up on the interior of yourappliance and even pollute the environment. Open up the det...
Page 11 - Precautions and advice; General safety; Environmentally-friendly technology
Precautions and advice 9 ! The washing machine was designed and built incompliance with the applicable international safetyregulations. The following information is provided foryour safety and should consequently be read carefully. General safety ● This washing machine should only be used by adults ...
Page 12 - Fuses; Care and maintenance
Cutting off the water or electricity supply ● Turn off the water tap after every wash. This will limit the wear of your appliances water system and also prevent leaks. ● Unplug your appliance when cleaning it and during all maintenance operations. Cleaning your appliance The exterior and rubber part...
Page 13 - Troubleshooting
Troubleshooting 11 Problem: The washing machine won’tstart? The wash cycle won’t start? The washing machine failsto fill with water? The washing machine continuously fills with waterand drains? The washing machine doesnot drain or spin? The washing machinevibrates too much during thespin cycle? The ...
Page 14 - Service; Before calling for assistance:; Notify the operator of:; We’re as close to you as your telephone
Service 12 Before calling for assistance: ● Check whether you can solve the problem on your own (see page 11). ● Restart the programme to check whether the problem has been solved. ● If this is not the case, contact an authorised Technical Service Centre. ! Always request the assistance of authorise...