Arcam Logo - Manuals

lo g o English E-5 speaker positioning standing speakers), or in corners. The speaker drivers should be at, or a little above, ear level when seated. If possible, centre your seating area between the surround speakers.The final sound will depend on the acoustics of the listening room and experimenti...

E-6 Stereo system with no LFE This is a typical two-channel system (such as Arcam’s Solo). Logo is connected to L/R preamplifier outputs. The crossover frequency on Logo should be adjusted to the low frequency roll off of the main speakers (see the manual for your speakers for this information). The...

lo g o English E-7 calibration The subwoofer’s has two jobs: firstly to reproduce accurately and with sufficient power the sub-bass that other ‘smaller’ speakers cannot (the centre speaker is almost always a ‘small’ speaker); and secondly to reproduce the ‘.1’ or low frequency effects (LFE) track of...

Technical specifications System design One-way speaker, with 10 litres internal volume. The cabinet is solidly constructed from machined MDF with internal bracing. Drive unit 10” (254mm) subwoofer drive unit with long excursion, magnetically shielded. Frequency range 20Hz to 250Hz Impedance 4 Ω nomi...