Dear Customer, Congratulations on purchasing your new product from Home Appliances. To register your Parts and Labour Warranty, some conditions apply, please refer to your warranty card for more details and contact our Customer Care team on: 1800 444 357 Our Customer Care Centre is there to ensure y...
Page 3 - Installation and User manual; Content; Warning; General Safety
Built-in Stainless Steel Gas Cooktop Installation and User manual Content Safety instructions-------------------------------------- 3 Product description------------------------------------- 4 Installation------------------------------------------------ 6 Start using your appliance------------------...
Page 4 - Safety Instructions; Safety When Installation; Product Description
3 Safety Instructions Safety When Installation ! DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE STORAGE DRAWER OR NEAR THIS APPLIANCE. ! DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION. ! WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT OR CARAVANS, IT SHA...
Page 5 - Installation; When you have installed the hob, make sure that; Cupboard Cutting; TO BE INSTALLED ONLY BY AN AUTHORIZED
5 Accessory Name Picture ( for reference only, physical unit maybe different) Quantity User Manual 1 Sealing tape 1 roll Additional labels You have additional rating label in accessory bag, suggest attach it onto a surface where it can be read e.g. inside surface of adjacent cupboard 1 set Installat...
Page 6 - Electrical Connection; Wiring diagram; TEST FOR CORRECT OPERATION:
7 2. Place Burner Box Apply the adhesive sealing tape to the underside lip of the burner box. Shown at G opposite. Place burner box into cutout hole and fit clamping brackets to clamp the hotplate to the bench. 3. Fit Burners And Trivet. Replace burners and ensure they are correctly repositioned ove...
Page 7 - Start Using Your Appliance
9 ADJUSTING THE BURNER MINIMUM FLAME HEIGHT: NOTE: This adjustment can only be performed by the installer or an authorised service personnel. The minimum burner flame is factory adjusted for the gas type stated on the gas type label adjacent to the gas connection and should not require adjustment. A...
11 Maintenance & Troubleshooting Cleaning and maintenance should be carried out with the appliance cold especially when cleaning the enameled parts. Avoid leaving alkaline or acid substances(lemon juice, vinegar etc.) on the surfaces. STAINLESS STEEL The stainless steel hob of the hotplate must ...
