AprilAire 8910 - Manuals - manualsarea.com

Page 4 - leaVIng aIR TeMPeRaTuRe sensoR (oPTIonal); THERMOSTAT; in the return trunk .

6 7 InsTallaTIon HVaC WIRIng DIagRaMs leaVIng aIR TeMPeRaTuRe sensoR (oPTIonal) ConVenTIonal HeaT/Cool sIngle TRansfoRMeR (use JuMPeR) Leaving air temperature can be measured by attaching an 8052 sensor to the LAT terminals . The leaving air temperature sensor measurement is displayed during the ins...

Page 5 - HVaC WIRIng DIagRaMs; HeaT PuMP sIngle TRansfoRMeR (use JuMPeR WIRe); HeaT PuMP TWo TRansfoRMeR (ReMoVe JuMPeR WIRe); InDooR aIR QualITy WIRIng DIagRaMs; InDooR aIR QualITy WIRIng WITH sePaRaTe TRansfoRMeRs

8 9 note: Outputs are 24VAC dry contact . Please see individual product installation instructions for more details . HVaC WIRIng DIagRaMs HeaT PuMP sIngle TRansfoRMeR (use JuMPeR WIRe) C R W W2 B Y Y2 O G L RH RC C 3 EQ HP HC G Y3 Y2 Y W3 W2 W FAULT DETECT REVERSING VALVE THERMOSTAT REVERSING VALVE ...

Page 6 - PoWeR & ReseT oPTIons; InsTalleR seTuP Menu

10 11 PoWeR & ReseT oPTIons The equipment control module is powered from 24VAC . The thermostat is powered from the equipment interface module and has a battery back-up option for the clock .The thermostat has a memory backup that saves the thermostat settings in case of a power interruption . T...

Page 7 - are only available dependent upon the value of other settings .; HVaC InsTalleR sysTeM seTTIngs Table

12 13 system setting Description factory default setting (bold) and setting range 19 . Fourth Stage Differential 4th stage differential . 1°f (0.5°C) 1°F to 9°F (0 .5°C to 4 .5°C) 20. Heat Blast Enables the Heat Blast feature. Disable Enable 21. Blast Offset Amount of heating when Heat Blast is init...

Page 8 - installation and operation .

14 15 seTuP & TesTIng seTuP & TesTIng The following tables contain the Indoor Air Quality system settings and their details . Default settings are shown in bold . Some settings are only present dependent upon the value of other settings . The use of an outdoor temperature sensor (recommended...

Page 10 - to accept the selection and proceed to the next test selection.; Heat / Cool Heating equipment Test

18 19 seTuP & TesTIng seTuP & TesTIng sysTeM TesT Menu (ConTInueD) sysTeM TesT Tables (ConTInueD) sysTeM TesT Tables While the equipment test is active the corresponding test information will be shown . Press [neXT] to accept the selection and proceed to the next test selection. TEMPERATURE ...

Page 11 - sysTeM TesT Tables; QuICK RefeRenCe To ConTRols & DIsPlay; HoMe sCReen; HeaT PuMP only

20 21 Heat / Cool Cooling equipment Test W W2 W3 y y2 y3 g 1st Stage Test ON ON 2nd Stage Test ON ON ON 3rd Stage Test ON ON ON ON Heat Pump Cooling equipment Test W W2 b y y2 o g 1st Stage Test ON ON ON 2nd Stage Test ON ON ON ON fan equipment Test W W2 W3/b y y2 y3/o g ON Humidification equipment ...

Page 13 - Control; sPeCIfICaTIons; electrical

24 P.O. Box 1467 • Madison, WI 53701-1467 • Phone: 800/334-6011 • Fax: 608/257-4357 www.aprilairepartners.com 61000850 12 .11B2205646A Patent Pending © 2011 Aprilaire – A division of Research Products Corporation Control Outdoor, Remote, Leaving and Return temperature sensor Maximum distance: 300 fe...

AprilAire 8910 - Manuals

Manuals:

Manual AprilAire 8910

Summary

AprilAire Manuals