Apex K1106 - Manuals

8 Items Included With the Control Panel: Please examine the contents of the shipping box for the following items: 1 - Control Panel 1 - Lock, key, and retaining clip 1 - 16.5 VAC 40 VA Transformer 9 - 4.7K Ω 1/4 Watt Resistors 1 - Auxiliary Output Harness 3 - Plastic mounting clip 1 - Microphone Har...

9 Retainer Clip (Note Position) Retainer Slot Locked Unlocked Control Board Control Board 1. Remove the cabinet door 2. Remove the lock knockout from the control cabinet door. Insert the key into the lock. Position the lock in the hole making certain thatthe latch will make contact with the latch br...

11 The Destiny-4100 is compatible with the ADEMCO 4140-BLK removable terminal strips. If necessary, these connectors allow for quick replacement of the control board. Wiring Notes Grounding: Ground the panel to the "com" on far left terminal block as shown in Wiring Diagram on previous page....

12 System Terminals House Phones: The R1 and T1 terminals provide telephone service to the house if the installation contains an RJ-31X terminal block for true phone line seizure. Telephone Company: The incoming telephone service is wired through an RJ-31X jack to the R and T terminals on the contro...

16 Programming System options are contained in EEPROM. Each programmable section of memory has a 4 digit location and a three digit value. To reduce the amount of programming necessary, each location is supplied with a default value. The programming process can be simplified and the chances of progr...

17 Quick Start Keypad connection: Connect a hardwire keypad to the keypad terminals on the control board, be certain to properly match the colors as follows: Black to BLK , Red to RED , Green to GRN , White to WHT . Speaker connection: Connect the violet keypad speaker leads to the INT and COM termi...

19 System Setup Zone 1-8 System Keypads System Board Inputs 1-8 Local Phone Panic Two Wire Smoke Loop Wireless Transmitters Zone 9 Zone 27 Zones 24 - 25 Zones 10 - 23 Hardware Device Types System Zone Assignments (Assignments may not be changed) Portable Transmitters Zone 28 Phone Line Monitor Zone ...

22 Zone 9 Input 2-Wire S moke Option Location Default New V al ue Default Descriptio n Zone Type 0775 255 Word 1 Word 2 Word 3 Word 4 Option 1 0771 016 Smoke (151 ) Detector (057) N/A N/A Option 2 0772 000 5819 Loop 3 Loop 2 Loop 1 (Shock Input) Loop 1 Loop 2 5816 (MN) 5817 Loop 3 Loop 2 Loop 1 Zone...

24 Zones 18 - 23: Alarm Type Transmitters Continued Zone 1 8 Zone 1 9 Input Transmitter 9 Serial #: Input Transmitter 10 Serial #: Option Location Default New V al ue Option Location Default New V al ue Device 1248 005 Device 1260 005 Loop 1245 130 Loop 1257 130 Zone Type 0919 255 Zone Type 0935 255...

26 Zone 2 8 Input Remote Phone Option Location Default New V al ue Default Descriptio n Zone Type 1079 255 Word 1 Word 2 Word 3 Word 4 Option 1 1075 000 Remote (1 37) Phone (125) N/A N/A Option 2 1076 000 Zone 2 6 Input System Key pa ds Option Location Default New V alue 3 – Status 1334 006 6 – Moni...

27 Zone 29: Monitor Trouble Conditions Option - A description of each option is available in the Glossary Location Value * Duration for recognition of AC power loss (minutes) .................................................. 0097 ....... 001 * Monitor low battery and enable battery test (001 to ena...

28 Automated Programming Locations Place system in RF field strength mode and speak serial number ........................................................ 9951 Exit RF field strength mode ...................................................................................................................

29 Vocabulary Word Location Access ..................... 024 Account .................. 025 Alarm ....................... 222 Alert ......................... 026 Am ........................... 033 And .......................... 197 Appliance ................ 027 April ........................ 227 Ar...

30 User Code 1 2 3 4 5 6 7 8 Location 0065 0066 0067 0068 0069 0070 0071 0072 System Times And Other Options System Time Options - A description of each time is available in the Glossary Units Location Default Entry delay 1 (Not to exceed 45 seconds in a UL installation) ...............................

33 System Triggers Event Location Output Location Option Location Time Option Default Times Any alarm activation ...................................... 0122 .......... 000 ........... 0188 .......... 010 ............ 0475 ...........005 Unit disarm or as long as alarm cut off and reset Burglary .......

34 System Triggers Option Option - Enter Total Value Activation Action Do Nothing ................................................................................................................... 000 Turn Output Off .....................................................................................

35 Automated Event Memory Log Upload Choose upload days total Location Value Sunday ........................................................................................................................................... 001 Monday ....................................................................

36 Fail To Open (Disarm) / Fail to Close (Arm) Options - Enter Total Location Value Enable Fail to Open ....................................................................................................................... 001 Fail to Close - Verify Armed to AWAY ......................................

37 Two-Way Digit Assignments This feature is not permitted in a UL installation Telephone Digit Default Function Location Default Value 0 Exit 2-way by going to keypad mode or hanging up .............................. 0162 ................... 000 1 Microphone #1 On .....................................

38 Ademco Contact ID Report Codes APEX Description Code Sent to Central Station ADEMCO Description Exterior instant .................................. E 131 Z ............................................ Perimeter burglary Exterior delay 1 ................................. E 134 Z .....................

39 Dialer Options Options - Enter total Value Dial Phone #1 ............................................................................................................... 001 Dial Phone #2 .................................................................................................................

41 Glossary of Terms Access code before arm: In this configuration, a full access code (arm/disarm code) must be entered to arm the system. Once armed, the system must be disarmed to allow a change from one arming mode to another. Alarm cut off and reset: The system provides for an automatic reset (...

60 ADEMCO LIMITED WARRANTY Alarm Device Manufacturing Company, a Division Of Pittway Corporation, and its divisions, subsidiaries and affiliates(`Seller'), 165 Eileen Way, Syosset, New York 11791, warrants its products to be in conformance with its own plans andspecifications and to be free from def...