Antec Plus 550 - Manuals - manualsarea.com

Page 2 - add the Antec PSU of your choice.; Setting Up; Do not use your fingernail to pry or lift the panels.; Installing the Motherboard; Disclaimer

1 At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illus...

Page 3 - Motherboard USB Pin Layout; Pin

2 1. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel. 2. Line up your motherboard with the standoff holes, and remember which holes are lined up. Not all motherbo...

Page 4 - CONNECTING THE AUDIO PORTS (AC’ 97 and HDA)

3 Connecting the IEEE 1394 (FireWire®, i.Link®) Port You will find a single 10-pin connector on a cable attached to the front IEEE 1394 connection. This is an Intel standard connector, which is keyed so that it can’t be accidentally reversed as long as it is connected to a proper Intel standard moth...

Page 5 - Sonata Designer 500 comes with a 500 Watt EarthWatts PS; NeoPower 550 Power Supply (; ut and Active

4 Earth Watts™ 500 Power Supply (Sonata Designer 500 Model Only) Sonata Designer 500 comes with a 500 Watt EarthWatts PS U which is built to be compatible with the ATX12V version 2.2 specification. This PSU is very efficient, which reduces power consumption by up to 25% and saves you money on your e...

Page 6 - Picture 1

5 Special Quiet Computing Fan Operation NeoPower power supplies feature an innovative design that decreases noise during normal use, but which allows for superior cooling capabilities as loads increase. Owing to its ultra high efficiency and low heat generation, NeoPower can utilize an 80mm exhaust ...

Page 7 - Description

6 7. Two sets of wires with two SATA drive connectors at one end and a 6-pin PSU connector at the other end. Note: The SATA connectors include a +3.3V output so you can power the latest SATA devices. Modular Cables: # Quantity Part Name Description 1-3 1 Power supply Includes 24-pin main connector a...

Page 8 - Both the EarthWatts 500 and NeoPower 550 come with a main; Hard Disk Installation; and noise reduction qualities of the silicon grommets.; Suspension Mount

7 7. Connect the power cord to the PSU. Power Switch: Both the EarthWatts 500 and NeoPower 550 come with a main power switch. Make sure you turn the switch to the ON (I) position before you boot up your computer for the first time. In normal operation there is no need to turn the switch to the OFF (...

Page 10 - The Front 92mm Fan Mounts; setting will be enough to supply adequate cooling.; The Washable Air Filter; Speed

9 Specifications: Size: 120 x 120 x 25.4 mmRated Voltage: DC 12VOperating Voltage: 10.2V ~ 13.8V The Front 92mm Fan Mounts You can install two 92mm fans into the fan cage in front of the internal 3.5” drives. These fans must be installed so that the air is blowing into the case. We recommend using A...

Page 11 - Europe

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC [email protected] Europe +31 (0) ...