Antec 902 - Manuals - manualsarea.com

Page 2 - Table of Contents; Introduction

Table of Contents Introduction 1.1 Case Specifications………………...……………......………….....… 2 1.2 Diagram……………………………………………....…......…….....… 2 Hardware Installation Guide 2.1 Setting Up……….…......…….................................................. 3 2.2 Power Supply Installation.…………………......….…............

Page 3 - Nine Hundred Two User’s Manual; Disclaimer

1 At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illus...

Page 4 - Case Specifications

2 1.1 Case Specifications Case TypeColor Gaming Case Color Black Dimensions 19.3” (H) x 8.7” (W) x 18.5” (D) 490mm (H) x 220mm (W) x 470mm (D) Weight 25.4 lbs / 11.5 kg Cooling 1 x Top 200mm TriCool™ Blue LED 3-Speed Fan 2 x Front 120mm Blue LED Fan with Front Control Knobs 1 x Rear 120mm TriCool™ B...

Page 5 - Hardware Installation Guide; Power Supply Installation

3 Hardware Installation Guide 2.1 Setting Up 1. Place the case upright on a flat, stable surface so that the rear panel (power supply and expansion slots) is facing you. 2. Remove the panel thumbscrews from the side panel and open it by sliding it towards you. Note: Place the panel thumbscrews caref...

Page 8 - Connecting the Front I/O Ports; Pin

6 2.8 Cable Management Compartment There is a cable management compartment between the motherboard and right side panel. You can tuck or route excess cables in this compartment.1. Remove both side panels.2. Choose the cables you would like to pass through the holes behind the motherboard tray and pu...

Page 9 - Power Switch / Reset Switch / Hard Disk Drive LED Connectors

7 3.2 eSATA You will find a SATA connector on a cable attached to the front ports. This internal SATA connector is designed to connect to a standard SATA connector on your motherboard. This will allow high-speed external hard disk enclosures such as the Antec MX-1 to run at the same speeds as intern...

Page 10 - Rewiring Motherboard Header Connection; Cooling System; Big Boy 200TM TriCoolTM Blue LED Fan

8 3.5 Rewiring Motherboard Header Connection There may come a time when you need to reconfigure the pin-out of a motherboard header connector. Examples could be for your USB header, audio input header, or some other front panel connector such as the Power Button connector. Before performing any work...

Page 13 - Europe

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC [email protected] Europe +31 (0) ...