AMX TX-MLCD - Manuals - manualsarea.com

Page 2 - Limited Warranty and Disclaimer

Limited Warranty and Disclaimer AMX Corporation warrants its products to be free from defects in material andworkmanship under normal use for a period of three years from date of purchasefrom AMX, with the following exceptions. Electroluminescent and LCD controlpanels are warranted for a period of t...

Page 3 - Table of Contents

TX-MLCD Mini-LCD Transmitter Table of Contents i Table of Contents Introduction ............................................................................ 1 Overview 1 Features 1 Operation 2 Wiring the TX-MLCD 3 AXCESS Programming ........................................................... 5 Overv...

Page 5 - Introduction; Overview; Features; TX –MLCD features include:

TX-MLCD Mini-LCD Transmitter Introduction 1 Introduction Overview The TX –MLCD (Figure 1) is a programmable Radio Frequency (RF) orInfrared (IR) wireless transmitter. Text for TX–MLCD menu functions ispresented on a 2-line, 16 character, horizontal liquid crystal display (LCD).All TX–MLCD functions ...

Page 6 - — used to program the TX–MLCD functions. The data; Operation

2 Introduction TX-MLCD Mini-LCD Transmitter • RS–232 port — used to program the TX–MLCD functions. The data rate is fixed at 1200 baud (bps). • Portable — the AMX TX–MLCD uses four AAA batteries for completely portable operation. Operation Once a program, like the example in the appendix, is loaded,...

Page 7 - Tip

TX-MLCD Mini-LCD Transmitter Introduction 3 Wiring the TX-MLCD Figure 3 shows how to connect the TX–MLCD RS–232 port to an AXCESSRS–232 cable for programming. Tip RingSleeve (3)Tip (2)Ring (5)Sleeve Length = 8 to 10 inches 2 TXD3 RXD 5 Ground 9-Pin D Male Cable Wiring 9-Pin D to Stereo PlugPin 2 to ...

Page 9 - AXCESS Programming

TX-MLCD Mini-LCD Transmitter AXCESS Programming 5 AXCESS Programming Overview You can use the AXCESS software to program all features of the TX–MLCD. A working knowledge of the AXCESS programming l anguage is neededto thoroughly understand the operation of the TX–MLCD. Languagefeatures include scree...

Page 10 - Programming Restrictions; Similar functions are; Programming Basics

6 AXCESS Programming TX-MLCD Mini-LCD Transmitter Programming Restrictions AXCESS program restrictions include: 1. DEFINE_LATCHING, DEFINE_MUTUALLY_EXCLUSIVE, andDEFINE_TOGGLING are not supported. Similar functions are accomplished with combinations of ON, OFF, and IF… ELSE. 2. PULSE is not supporte...

Page 11 - moves the cursor one position right; With the text already initialized, the main part

TX-MLCD Mini-LCD Transmitter AXCESS Programming 7 • A PUSH occurs in the program every time a button (key) is pressed.Figure 4 shows the button assignments. 1 6 4 16 • • • • • • • • • • • • 5 10 15 20 Top Left = = Bottom Right • Turning on channels 1 through 254 enables transmission (RF or IR) ofthe...

Page 12 - Sample Program; AXCESS Language Programming Guide

8 AXCESS Programming TX-MLCD Mini-LCD Transmitter Sample Program Figure 5 is a sample demo AXCESS software program for a TX-MLCD.Refer to the AXCESS Language Programming Guide for complete programming instructions. PROGRAM_NAME='TXMLCD 6 BUTTON DEMO PROGRAM, RSH 04-29-91'(* DATE:04/28/92 TIME:16:53:...

Page 19 - Figure 6 shows the TX-MLCD, and Figure 6 lists the specifications.; Horizontal LCD

TX-MLCD Mini-LCD Transmitter Specifications 15 Specifications Overview Figure 6 shows the TX-MLCD, and Figure 6 lists the specifications. Horizontal LCD SOURCE IBM VHS UMATIC SLIDES MAC CASS LSR DS DUAL AUX VOLUME LIGHTS V-SHOW Specifications Buttons Display IR transmission Memory Includes Enclosure...

Page 21 - Technical Support

TX-MLCD Mini-LCD Transmitter Technical Support 17 Technical Support Overview Before you call AMX for assistance, check your AXlink, power, and cableconnections, and the integrity of your software operating system. Reload thesoftware to see if something in the program is causing the problem. If the p...