AMX NXP-CPI16 - Manuals - manualsarea.com

Page 2 - AMX Limited Warranty and Disclaimer

AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, excep...

Page 3 - Table of Contents

Table of Contents i NXP-CPI16 NetLinx Custom Panel Interface Table of Contents Product Information ........................................................................................... 1 Specifications ...............................................................................................

Page 5 - Product Information

Product Information 1 NXP-CPI16 NetLinx Custom Panel Interface Product Information The AMX NXP-CPI16 is a NetLinx panel device that allows system integrators to connect switches, indicators, and rotary encoders to a NetLinx control system. Providing contact closure inputs and feedback outputs for up...

Page 6 - Specifications; The table below lists the NXP-CPI16 specifications.

2 NXP-CPI16 NetLinx Custom Panel Interface Specifications The table below lists the NXP-CPI16 specifications. NXP-CPI16 Specifications Power Requirement 12 VDC (300 mA max.) Input Connectors: Indicator Power Two-pin 3.5 mm captive-wire. This connector is used to supply a higher voltage and more curr...

Page 7 - Input and Output Connectors; I/O Connector Pinouts

3 NXP-CPI16 NetLinx Custom Panel Interface Input and Output Connectors To install the NXP-CPI16, connect ribbon cables or a PC board to one or more of the headers. The table below shows the pinouts for the two 20-pin headers. Quadrature Connectors The table below lists the connector pinouts for the ...

Page 8 - Quadrature Inputs; Insert a QDIR Send_Command in the NetLinx program.

4 NXP-CPI16 NetLinx Custom Panel Interface Quadrature Inputs By default, the quadrature inputs expect the phase relationship, shown in FIG. 2, for a clockwise rotation of the encoder to generate a positive level change. If the phase relationship does not match the example, a clockwise rotation will ...

Page 9 - Programming; Status ON Mode Channel Assignment; Levels

Programming 5 NXP-CPI16 NetLinx Custom Panel Interface Programming There are two modes of Channel Assignments: Discrete Output and Default Mode. Both modes are set using the ‘STATUS-ON’ and ‘STATUS-OFF’ commands. Discrete Output mode should be used if channel status feedback for the outputs needs to...

Page 12 - Statements such as this example can be used in a program.

8 NXP-CPI16 NetLinx Custom Panel Interface The NXP-CPI16 uses input channels to report user input on the contacts or switches attached to the input terminals. Output channels are used to turn on the lamp or LED display devices to indicate the button status to the user. The NXP-CPI16 default mode is ...

Page 13 - Input/Output STATUS Mode

9 NXP-CPI16 NetLinx Custom Panel Interface Each of the two 20-pin connectors is assigned a group of 8 input and output channels. The table below shows the relation of input and output channels in the STATUS modes. The NXP-CPI16 may be configured to default to STATUS-ON mode using the following metho...

Page 15 - System Worksheets; Header 1

System Worksheets 11 NXP-CPI16 NetLinx Custom Panel Interface System Worksheets Header 1 Header 2 Dealer ID Date Dealer PO Number Job SO Number Description Serial Number Rev Number Device Number CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 Out In Out In Out In Out In Out In Out In Out In Out In 9 10 11 12 Ground...