AMX NXA-WC80211GCF - Manuals

AMX NXA-WC80211GCF – Manual in PDF format online.

Manuals:

Manual

Manual AMX NXA-WC80211GCF

Summary

Page 2 - NXA-WC80211GCF Card and Antenna Overview; NXA-WC80211GCF Installation into MVP Panels; Note; Step 1: Access the MVP’s Internal Components; Blue arrows; in a single motion; Internal

NXA-WC80211GCF Card and Antenna Overview This upgrade kit requires that pre-existing panels first be removed from their current location (surface, wall or docking station) before an installer can access the internal circuit boards and upgrade a pre-existing 802.11b wireless CF card. MVP panels requi...

Page 3 - Installation Guide; Wireless Compact Flash Card; using the procedures in the following step.; Step 3: Close and Re-secure the MVP Panel Enclosure; NXA-WC80211GCF Installation into Modero NXT Panels; Step 1: Remove the Existing NXT Outer Housing; While holding the outer housing and base plate at a 45° angle; CF memory card; DO NOT REMOVE these screws; They secure the plastic base front cover.

Installation Guide NXA-WC80211GCF Wireless Compact Flash Card 14. With the antenna now securely attached to the MVP’s inner housing, remove the cutout by carefully pulling up on the cutout and threading the antenna wire through the T -shaped opening. 15. To complete the upgrade process, close and re...

Page 4 - Step 3: Close and Re-secure the NXT Panel Enclosure; In a single motion; NXA-WC80211GCF Installation into Modero NXD Panels; Step 1: Remove the Existing NXD Outer Housing; The overlay connector must first be released before the rear back; Step 3: Close and Re-secure the NXD Panel Enclosure

6. Locate the two screw holes at either sides of the front speaker grill and then use a grounded Phillips-head screwdriver to remove the two Tilt Bracket Screws (FIG. 7). This procedure both loosens the rear Tilt Bracket cover plate ( with the AMX logo and Hinge brackets ) and provides greater flexi...