AMX AXP-CPI16 - Manuals - manualsarea.com

Page 2 - AMX Limited Warranty and Disclaimer

AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, excep...

Page 3 - Table of Contents

Table of Contents i AXP-CPI16 16-Channel Custom Panel Interface Table of Contents Product Information ........................................................................................... 1 Specifications ............................................................................................

Page 5 - Product Information; Specifications

Product Information 1 AXP-CPI16 16-Channel Custom Panel Interface Product Information The AMX AXP-CPI16 16 Channel Custom Panel Interface Board (FIG. 1) simplifies the process of creating custom control panels for Axcess systems. Providing contact closure inputs and feedback outputs for up to 16 but...

Page 7 - Installation

3 AXP-CPI16 16-Channel Custom Panel Interface Installation Mounting Dimensions FIG. 1 AXP-CPI16 mounting dimensions Mounting Dimensions Item Inch mm Item Description A 0.10 2.50 K P2 20-Pin Header .025 inch (6 mm) square pins, .1 inch (2.4 mm) typical spacing B 1.75 44.50 L 0.125 Inch (3.2 mm) mount...

Page 8 - Setting the AXlink Device Number; Connecting the Two 20-pin Headers

4 AXP-CPI16 16-Channel Custom Panel Interface Setting the AXlink Device Number The 8-position device DIP switch defines the AXP-CPI16 as an AXlink device. It can be one of 255 devices in the Axcess Control System. Set the device number with the total value of all ON (down) positions. As an example, ...

Page 9 - Switch Wiring Diagrams

5 AXP-CPI16 16-Channel Custom Panel Interface Switch Wiring Diagrams FIG. 2 diagrams LED and Switch wiring. Connecting the AXlink Wiring To install the AXlink data/power bus wiring. 1. Strip 0.25 inch off the wire insulation for all four wires. If the wire is 20 AWG or less, fold the exposed wire ov...

Page 11 - Programming

Programming 7 AXP-CPI16 16-Channel Custom Panel Interface Programming Use the same Axcess commands as with other AXlink control panels, such as the AXU-MSP series mini-softwire panels. When using the AXP-CPI16 as a control device, use On, Off, and Pulse commands to control sources connected to outpu...

Page 12 - Testing the Unit

8 AXP-CPI16 16-Channel Custom Panel Interface Testing the Unit If you have programmed the Axcess software, load the program into a PC connected to the control system Master port. See Programming on page 4. 1. Push switches connected to the AXP-CPI16. 2. Look at the lower left of the Axcess screen to...

Page 13 - AXP-CPI16 System Worksheet

AXP-CPI16 System Worksheet 9 AXP-CPI16 16-Channel Custom Panel Interface AXP-CPI16 System Worksheet Dealer ID Date Dealer PO Number Job SO Number Description Serial Number Rev Number Device Number 4 3 2 1 15 16 4 3 14 2 13 1 6 5 18 6 17 5 8 7 20 8 19 7 Out In Out In Out In Out In Out In Out In Out I...