AMX AVS-SL-PR-0401-0601 - Manuals

Page 2 - AMX Limited Warranty and Disclaimer

AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity. AMX warrants its products to be free of defects in material and wo...

Page 3 - Safety Instructions

Safety Instructions AVS-SL-PR-0401-0601 Safety Instructions Overview Please read these instructions before using your Procon switcher. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment. Power Source Use only a three-w...

Page 5 - Table of Contents

Table of Contents i AVS-SL-PR-0401-0601 Table of Contents Safety Instructions .............................................................................................. a Overview .................................................................................................................. a...

Page 7 - Overview; Product Specifications

Overview 1 AVS-SL-PR-0401-0601 Overview The Solecis AVS-SL-PR-0401-0601 Presentation Switcher (FG1330-2011-01) combines switching of PC, computer, video and audio for presentation and conference rooms, home cinema, AV Rental Companies and any environment where a number of mixed source types need to ...

Page 9 - Connections; Typical Installation For Use With a Projector; Audio Connections

Connections 3 AVS-SL-PR-0401-0601 Connections Typical Installation For Use With a Projector Connect the RGB, Video and Audio sources to the Input sockets on the rear panel of the unit. The RGB/Video inputs are 75 ohm terminated and the audio inputs 47Kohm terminated. The RGB/Video and audio outputs ...

Page 11 - Operation; Front Panel

Operation 5 AVS-SL-PR-0401-0601 Operation Front Panel Source Selection To select a Source press the Button corresponding to the numbered Input. The button will illuminate. A PC input will be routed to the PC output sockets. A selected Video Input will also be routed to its respective Composite or S-...

Page 12 - Input mode only

Operation 6 AVS-SL-PR-0401-0601 Input mode only When the 2011 is powered up a mode command will be sent to a display on the first press of any Input select button. The command will either be RGB, Composite or S-Video depending on the button pressed. This will ensure a display device is set to the co...

Page 13 - SET Commands; Input Switching

SET Commands 7 AVS-SL-PR-0401-0601 SET Commands Input Switching The following command switches input sources. Bytes 3 and 4 01 to 04 correspond to PC inputs 1 to 4 05 to 0A correspond to video inputs 1 to 6 00 for Blank 1F no change Byte 5 This switches the input sync but holds the RGB in blank for ...

Page 15 - GET Commands; Switch and Volume Status Feedback; Request Address

GET Commands 9 AVS-SL-PR-0401-0601 GET Commands Switch and Volume Status Feedback Transmit Receive The same string will be transmitted each time an input is selected. Request Address Transmit Receive Request Attenuation Levels Transmit Receive Where x is a value between 00 and 1F. Byte 1 Byte 2 Byte...

Page 16 - Identity Command

GET Commands 10 AVS-SL-PR-0401-0601 Identity Command Sending this command: The unit will return: Byte 1 Byte 2 Byte 3 Byte 4 F2 09 EA 80 Byte 1 Byte 2 6E 04 =2010

Page 17 - Device Manager

Device Manager 11 AVS-SL-PR-0401-0601 Device Manager Overview This software can be used for configuring the 2011 to control external display devices. It is downloadable from our website www.procon.co.uk under support. Connection Connect the serial port of the PC as follows: Run Device Manager. If th...