Page 2 - RANGE SAFETY; Your safety and the safety of others are very important.; DANGER; WARNING
2 RANGE SAFETY You can be killed or seriously injured if you don't immediately You can be killed or seriously injured if you don't follow All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what canhappen if the instructions are n...
Page 3 - INSTALLATION REQUIREMENTS; Tools and Parts; Tools Needed; Location Requirements
3 INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed ■ Tape measure ■ Phillips screwdriver ■ Level ■ Hand or electric drill ■ Wrench or pliers ■ Marker or penci...
Page 4 - Mobile Home - Additional Installation Requirements; Product Dimensions
4 Mobile Home - Additional Installation Requirements The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is n...
Page 5 - Electrical Requirements - Canada Only
5 Electrical Requirements - Canada Only If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate and wire gauge are in accordance with local codes.Be sure that the electrical connection and wire size are ad...
Page 6 - INSTALLATION INSTRUCTIONS; Unpack Range
6 INSTALLATION INSTRUCTIONS Unpack Range 1. Remove shipping materials, tape, and film from the range. Keep cardboard bottom under range. Do not dispose of anything until the installation is complete. 2. Remove oven racks and parts package from oven and shipping materials. 3. To remove cardboard bott...
Page 7 - Adjust Leveling Legs
7 4. Drill two ¹⁄ 8 " (3 mm) holes that correspond to the bracket holes of the determined mounting method. See the following illustrations. Floor Mounting Rear position Front position Diagonal (2 options) Wall Mounting 5. Using the two #10 x 1 5 ⁄ 8 " (4.1 cm) Phillips-head screws provided, ...
Page 9 - Complete Installation; If You Need Assistance or Service:
9 Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Check that you have all of the range accessories, especially oven racks. These accessories may be in the...