Amana WS916D1- Manuals

Amana WS916D1– Installation Manual in PDF format online.

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Figure 1 - Wall Sleeve Dimensions; Figure 2 - Minimum Wall Opening Dimensions; Figure 3 - Minimum Unit Clearances; Figure 4 - Minimum Interior and Exterior

2 16 1/16" 410 mm Wall Receptacle Within 58" FromBottom Right Side Corner on208/230 VAC Units Only 42" 1065 mm 14 1/8" 359 mm Figure 1 - Wall Sleeve Dimensions 42 1 /4" 10 75 m m M inim um 1 6 1 /4 " 4 1 5 m m M in im u m Finished Floor Dimension "B"in Table 1 Figure ...

Page 3 - Sleeve; Rear Closure; PRE-INSTALLATION CONSIDERATIONS; Do not use

3 • If used, a 208/230-volt wall receptacle must be locatedwithin 58 inches of the lower right sleeve corner. Exten-sion cords must not be used with the unit. See the noteon Figure 1. • For installations in walls deeper than 13-7/8 inches,special care is necessary to prevent problems with rainwater,...

Page 4 - WALL SLEEVE INSTALLATION

4 WALL SLEEVE INSTALLATION After the wall opening is checked and approved for location,size, and clearances, complete the following to install the wallsleeve. 1. Remove the outside enclosure panel from the wall sleeve. 2. Slide the wall sleeve into the wall opening. Do not distortthe cabinet shape t...

Amana Manuals