Amana PACKAGE TERMINAL- Manuals

Page 5 - ELECTRICAL

p5 CALM 42” x 16” by Applied Comfort PN802390R.00 • Energy Management – Sometimes known as Front Desk Control, an input is provided so that the unit can be manually disabled from a different location. If the unit detects...

Page 6 - INSTALLATION

p6 CALM 42” x 16” by Applied Comfort PN802390R.00 Grounding For safety and protection, the unit is grounded through the service cord plug or through separate ground wire provided on hard wired units. Be sure that the branch...

Page 8 - HOW

p8 CALM 42” x 16” by Applied Comfort PN802390R.00 5.3 INSTALLING UNIT INTO WALL SLEEVE 1. Carefully remove shipping tape from the front panel and vent door. See Fig. 9. 2. Remove shipping screw from the vent door, if pres...

Page 11 - KEYPAD

p11 CALM 42” x 16” by Applied Comfort PN802390R.00 No.1. Electric Heating Only / Emergency Heat (For Heat Pump Units Only). This setting is typically used for Emergency Heating. No.2. Wall Thermostat Enable. A ...

Page 12 - WALL

p12 CALM 42” x 16” by Applied Comfort PN802390R.00 To exit Keypad Configuration: Keypad Configuration will end on its own 30 seconds after the last button press or when the MODE button on the Keypad is pressed. Fahrenheit/...

Page 13 - ENERGY

p13 CALM 42” x 16” by Applied Comfort PN802390R.00 Installing Thermostat Wiring 1. Check to be sure power to unit is disconnected. 2. Pull terminal connector to remove. NOTE : Terminal connector can be removed and replaced to ...

Page 14 - OPERATION

p14 CALM 42” x 16” by Applied Comfort PN802390R.00 8.3 INTELLIGENT SELF ‐‐ CHECKING CONTROL Your APPLIED COMFORT PTAC has a computer board that continuously checks key components of the unit to ensure they are operating properly...

Page 17 - TROUBLESHOOTING

p17 CALM 42” x 16” by Applied Comfort PN802390R.00 12.0 TROUBLESHOOTING

Page 18 - PARTS; CALM

p18 CALM 42” x 16” by Applied Comfort PN802390R.00 13.0 PARTS 13.1 CALM PTAC PARTS – AIR CONDITIONER