Amana MRX1 - Manuals

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 7 of 80 Part No. 16400033 Original Instructions When operating this oven, you must follow safety precautions to reduce the risk of personal injury due to burns, electric shock or possible exposure to microwave energy IMPORTANT SAFETY INSTRUCTIONS ⚠ RECOGNI...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 8 of 80 Part No. 16400033 Original Instructions SAVE THESE INSTRUCTIONS 1 ALWAYS operate the oven from an adequately grounded outlet Do not operate on a two-wire extension cord 2 Before servicing the oven (if oven is operable) perform the microwave leakage...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 9 of 80 Part No. 16400033 Original Instructions SAVE THESE INSTRUCTIONS PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY A DO NOT attempt to operate this oven with the door open since open door operation can result in harmful exposure t...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 10 of 80 Part No. 16400033 Original Instructions SAVE THESE INSTRUCTIONS a DO NOT overcook food Carefully attend oven when paper, plastic, or other combustible materials are placed inside the oven, due to the possibility of ignition b Remove wire twist-tie...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 11 of 80 Part No. 16400033 Original Instructions Introduction Theory of Operation Sequence of Operation 2

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 12 of 80 Part No. 16400033 Original Instructions Theory of Operation Utilizing technology that combines Convection and Hot Air-Impingement along with Microwaves, the ARX-MRX family of High Speed Combination Ovens rapidly cook food without sacrificing quali...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 13 of 80 Part No. 16400033 Original Instructions Specifications Power Specification· Input· Output· Consumption Oven DimensionsWeightGroundingInstallation 3

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 15 of 80 Part No. 16400033 Original Instructions Grounding/Earthing Instructions Oven MUST be grounded. Grounding reduces risk of electric shock by providing an escape wire for the electric current if an electrical short occurs This oven is equipped with a...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 16 of 80 Part No. 16400033 Original Instructions Oven Operation Touch Panel Menu DescriptionsTouch Screen Icon DescriptionsBasic Oven OperationPreprogrammed MenuManual Cooking 4

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 17 of 80 Part No. 16400033 Original Instructions Touch Panel Menu Descriptions MENU SCREEN • Scroll up or down to choose from different categories CHANGE TEMPERATURE • Changes current oven temperature MANUAL RECIPE • Manually enter settings for a recipe ED...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 18 of 80 Part No. 16400033 Original Instructions POWER ON ICON • Press to preheat oven( Fan will continue to run if temperature is over 200°F / 95°C ) MENU ICON • Press to access a Menu Screen for manually editing recipes, changing user options, etc HOME I...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 19 of 80 Part No. 16400033 Original Instructions Power On Oven, Preheat This oven can be set to a preheat temperature between 200°F (95°C) and 520°F (270°C) Oven must be plugged in ( Screen will power on to “Standby Mode” within approximately 30 seconds.) ...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 20 of 80 Part No. 16400033 Original Instructions Preprogrammed Menu Items Cooking with Preprogrammed Menu Items 1 After oven has preheated to desired temperature, open oven door, place food in oven and close door 2 Scroll to choose desired food item from M...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 21 of 80 Part No. 16400033 Original Instructions Manual Cooking Note: “Manual cooking” must be enabled in user options (see Section – User Options) Use manual cooking when a specific entered time and cooking power levels are desired. Manual cooking is very...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 22 of 80 Part No. 16400033 Original Instructions Programming Manual ProgrammingManual Organization: FoldersManual Organization: TabsOven Programming: USB Flash DriveOven Programming: Wi-Fi and Ethernet 5

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 23 of 80 Part No. 16400033 Original Instructions Save a Menu Item from Manual Cook: 1 To Save the settings and create Menu Item, press the Blue Save Icon 2 Choose a background color and icon, or an image, to customize the Menu Item 3 Press the Right Arrow ...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 24 of 80 Part No. 16400033 Original Instructions Manually Edit an Existing Recipe Folder: Note: You may also edit folders using the ACP Programming Application. 1 Press the Blue Menu Icon at the bottom of the screen 2 Press the “Manage Folders” option in t...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 25 of 80 Part No. 16400033 Original Instructions Manually Create a Recipe Tab Note: You may also add recipe tabs using the ACP Programming Application. 1 Press the Blue Menu Icon at the bottom of the screen 2 Press the “Manage Tabs” option in the Menu Scre...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 26 of 80 Part No. 16400033 Original Instructions Caution: Uploading a new file will overwrite existing items on oven. To ensure items are not lost, first backup files by exporting to USB drive. Export Menu via USB Flash Drive 1 Press the Blue Menu Icon at ...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 27 of 80 Part No. 16400033 Original Instructions Connect Oven to Network: 1 Press the Blue Menu Icon at the bottom of the screen2 Press the “Network” option 3 Connect to network using your choice of Ethernet or Wi-Fi: To connect via Wi-Fi • Enable Wi-Fi ca...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 28 of 80 Part No. 16400033 Original Instructions Care and Cleaning 6

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 29 of 80 Part No. 16400033 Original Instructions Care and Cleaning Follow the recommendations below and on the following page for proper maintenance of ARX & MRX ovens ⚠ Caution : The use of caustic cleaning products or those containing ammonia, phosph...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 31 of 80 Part No. 16400033 Original Instructions User Options Default User Options 7

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 32 of 80 Part No. 16400033 Original Instructions User Options There are several options you can change to customize the operation of the oven for your business The table on the following page shows these options The factory setting is shown in bold type. A...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 34 of 80 Part No. 16400033 Original Instructions Firmware Update Procedure 8

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 37 of 80 Part No. 16400033 Original Instructions Troubleshooting Before Calling for ServiceService Test ModeOven TestsError CodesTroubleshooting Chart 9

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 38 of 80 Part No. 16400033 Original Instructions ⚠ WARNING To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time Only an authorized servicer should remove outer caseThis is a Class A product In a do...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 39 of 80 Part No. 16400033 Original Instructions Service Test Mode Service Test Mode: The Service Mode is a useful tool to aid in diagnosing any service issue To access the oven’s Service Test Mode, the PIN Code must be enabled If the PIN Code is not enabl...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 42 of 80 Part No. 16400033 Original Instructions Oven Tests All ACP Microwave Oven Power Outputs are rated using the IEC705 standards Using the IEC705 test method requires precision measurements and equipment that is not practical to be performed in the fi...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 43 of 80 Part No. 16400033 Original Instructions Oven Tests Microwave Leak Test The leakage reading must be recorded on the service repair documentation while in the customer’s premises Check for radiation leakage after servicing Should the leakage be more...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 44 of 80 Part No. 16400033 Original Instructions Measuring Procedure 1 Fill the glass beaker with 275 ml of cool water and place in center of oven Close door 2 After oven has preheated, press the Blue Menu Icon 3 Press the Manual Recipe option 4 Enter cook...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 45 of 80 Part No. 16400033 Original Instructions Error Codes Code Description Corrective Action A2 Invalid Display Firmware Update Firmware or Replace Touch Control B1 Touch Screen Error Replace Touch Control B2 Wi-Fi Error Reset Touch Control If continued...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 46 of 80 Part No. 16400033 Original Instructions Troubleshooting Chart SYMPTOM POSSIBLE CAUSE REMEDY Oven will not operate No Display Incoming Power Supply Check all electrical connectionsCheck for power at wall receptacleCheck Fuse F1 Oven will not operat...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 47 of 80 Part No. 16400033 Original Instructions Component Overview Testing Removal and Replacement 10 ⚠ WARNING • High voltage capacitor must be discharged before performing these procedures. Wait at least five (5) minutes after shutdown of high voltage s...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 48 of 80 Part No. 16400033 Original Instructions Panel Removal Panel Removal ⚠ DANGER Disconnect Power Supply before removing any Covers or Panels. The high voltages and currents at the filament and secondary winding of the Transformer are extremely danger...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 49 of 80 Part No. 16400033 Original Instructions Rear Exhaust Duct The Rear Exhaust Duct directs exhaust air from the Cooling Fans out of the rear of the oven Removal and Replacement 1 Disconnect oven from Power Supply2 Remove Top, Right, Left and Rear Pan...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 50 of 80 Part No. 16400033 Original Instructions Oven Thermal Cutout (TCO) Oven Thermal Cutout (TCO) The Thermal Cutout or TCO acts as a high-limit to protect the oven from an overheat situation in the cooking cavity The TCO is a switching device that will...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 51 of 80 Part No. 16400033 Original Instructions Triacs Triacs A Triac is an electronic switching device similar to a Relay Depending on the model, there will be up to four (4) Triacs, one (1) for the Cooling Fans, one (1) for the Heater, and one (1) for e...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 52 of 80 Part No. 16400033 Original Instructions Autotransformer and Snubber Autotransformer and Snubber The Autotransformer circuit provides constant voltage to the Power Board and Cooling Fans The Snubber is in place to reduce voltage spikes Testing With...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 54 of 80 Part No. 16400033 Original Instructions Power Relay The Power Relay is a switching device that controls the incoming power to all other components Testing With oven disconnected from the Power Supply, disconnect the Wires from the device Check res...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 55 of 80 Part No. 16400033 Original Instructions HV Capacitor HV Capacitor ⚠ DANGER The high voltages and currents at the filament and secondary winding of the transformer are extremely dangerous. Never make any direct voltage or current measurements of th...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 56 of 80 Part No. 16400033 Original Instructions HV Diode HV Diode ⚠ DANGER The high voltages and currents at the filament and secondary winding of the transformer are extremely dangerous. Never make any direct voltage or current measurements of this compo...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 57 of 80 Part No. 16400033 Original Instructions Magnetron TCO Magnetron TCO ⚠ DANGER All High Voltage Capacitors must be discharged before performing this procedure. The Magnetron TCO protects the Magnetron from an overheat situation Testing Remove Wires ...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 58 of 80 Part No. 16400033 Original Instructions Magnetron Magnetron ⚠ DANGER The high voltages and currents at the filament and secondary winding of the transformer are extremely dangerous. Never make any direct voltage or current measurements of these ci...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 60 of 80 Part No. 16400033 Original Instructions Wave Guide Wave Guide ⚠ DANGER All High Voltage Capacitors must be discharged before performing this procedure. The Wave Guide channels the microwaves generated by the Magnetron into the cooking chamber Remo...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 61 of 80 Part No. 16400033 Original Instructions HV Transformer HV Transformer ⚠ DANGER The high voltages and currents at the filament and secondary winding of the transformer are extremely dangerous. Never make any direct voltage or current measurements a...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 62 of 80 Part No. 16400033 Original Instructions Primary Interlock Switch Primary Interlock Switch The Primary Interlock Switch is a safety device that opens its contacts when the door is opened. It is to first switch to open when the door opens Testing Us...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 63 of 80 Part No. 16400033 Original Instructions Secondary, Monitor and Tertiary Interlock Switches Secondary, Monitor and Tertiary Interlock Switches The Secondary, Monitor and Tertiary Interlock Switches are part of a redundant safety system that will tu...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 64 of 80 Part No. 16400033 Original Instructions Power Supply Board Power Supply Board The Power Supply Board steps down the incoming line voltage and rectifies it to 24 VDC for the electronics of the oven Testing ⚠ CAUTION Extreme care must be taken when ...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 65 of 80 Part No. 16400033 Original Instructions Main Control Board Main Control Board The Main Control Board is a PCB that controls the functions of the oven Testing Use the Oven Test Mode Removal and Replacement 1 Disconnect oven from Power Supply2 Remov...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 66 of 80 Part No. 16400033 Original Instructions Touch Screen Display Board Touch Screen Display Board The Touch Screen Display Board is the interface by which input to the oven’s controls is given by the user and information is output to the display Testi...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 67 of 80 Part No. 16400033 Original Instructions Temperature Sensor Temperature Sensor The Temperature Sensor (RTD) is a device whose electrical resistance changes with changes in temperature Testing With Connector Plug disconnected, test for resistance ac...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 68 of 80 Part No. 16400033 Original Instructions Convection Motor Convection Motor The convection motor turns a fan that creates the air movement for impingement cooking ⚠ CAUTION Extreme care must be taken when performing tests with line voltage applied. ...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 69 of 80 Part No. 16400033 Original Instructions Heater Heater The Heater is mounted around the Convection Blower Wheel and heats up the impingement air for the cooking chamber Testing With the Wires removed test between the two (2) Terminals Resistance ≈ ...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 70 of 80 Part No. 16400033 Original Instructions Cooling Fans Cooling Fans The Cooling Fans draw in ambient air from outside the oven and circulates it through the component compartments to keep them within their operating temperature range Testing With Co...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 71 of 80 Part No. 16400033 Original Instructions Cooling Fan Motor Run Capacitors Cooling Fan Motor Run Capacitors The Cooling Fan Motor Run Capacitors alter the current going to the Cooling Fan Motors Testing Discharge Capacitors With Wires removed, check...

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 72 of 80 Part No. 16400033 Original Instructions Wiring Diagrams / Schematics 11

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 73 of 80 Part No. 16400033 Original Instructions ELECTRICAL SCHEMATIC: Models ARX1, ARX1BL, MRX1, MRX1BL Wiring Diagrams & Schematics

©2018 ACP, Inc. Cedar Rapids, IA 52404 Page 77 of 80 Part No. 16400033 Original Instructions Notes

NON-CONFORMANCE LETTER REPORT 1717 Arlingate Lane Columbus, OH 43228 Telephone: (614) 279-8090 Facsimile: (614) 279-4642 www.intertek.com This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and...

NON-CONFORMANCE LETTER REPORT ACP Inc. Intertek Report No.: 103443931COL-001A Version: 6-March-2017 GFT-OP-10a SECTION 3 PROJECT STATUS & ACTION Issuance of this letter report completes the scope covered by Intertek Project No. G103443931. If there are any questions regarding the results contain...

225 49 th Ave. Dr. SW, Cedar Rapids, IA 52404 800-233-2366, 319-368-8120, Fax: 319-368-8198 www.acpsolutions.com ARX2 / MRX2 Estimated Heat Load Calculations ARX2/MRX2 (single phase) Parameters Operating Time 12 Hours Energy Costs $0.11 KWHr Idle Time 2 Hours Cook Cycles/Daily 100 Typical Cook Time ...

225 49 th Ave. Dr. SW, Cedar Rapids, IA 52404 800-233-2366, 319-368-8120, Fax: 319-368-8198 www.acpsolutions.com ARX1 / MRX1 Estimated Heat Load Calculations ARX1/MRX1 (single phase) Parameters Operating Time 12 Hours Energy Costs $0.11 KWHr Idle Time 2 Hours Cook Cycles/Daily 100 Typical Cook Time ...

225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com © 2018 ACP, Inc. Cedar Rapids, Iowa 52404 AIA File #: Specification #: Amana is a trademark of Maytag Properties, LLC or its related companies. Manufactured under license by AC...

225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com © 2018 ACP, Inc. Cedar Rapids, Iowa 52404 AIA File #: Specification #: Item #: Project #: 15 times faster than conventional ovens. Xpress® Line | Heavy Volume This category of ...

©2017 ACP, Inc. Cedar Rapids, IA 52404 For full product documentation visit: www.acpsolutions.com 1 Part No. 20217601 Original Instructions Quick Start Guide | ARX & MRX High Speed Commercial Oven Refer to Product Safety Manual for Safety Statements. Complete Owner’s Manual available online This...

©2017 ACP, Inc. Cedar Rapids, IA 52404 Part No. 20217601 Original Instructions For full product documentation visit: www.acpsolutions.com 2 Quick Start Guide | ARX & MRX High Speed Commercial Oven Manual Cooking Note: “Manual cooking” must be enabled in user options ( see page 6 ) Use manual coo...

©2017 ACP, Inc. Cedar Rapids, IA 52404 For full product documentation visit: www.acpsolutions.com 3 Part No. 20217601 Original Instructions Quick Start Guide | ARX & MRX High Speed Commercial Oven Save a Menu Item from Manual Cook: 1. To save the settings and create menu item, touch the blue sav...

©2017 ACP, Inc. Cedar Rapids, IA 52404 Part No. 20217601 Original Instructions For full product documentation visit: www.acpsolutions.com 4 Quick Start Guide | ARX & MRX High Speed Commercial Oven Caution: Uploading a new file will overwrite existing items on oven. To ensure items are not lost, ...

©2017 ACP, Inc. Cedar Rapids, IA 52404 For full product documentation visit: www.acpsolutions.com 5 Part No. 20217601 Original Instructions Quick Start Guide | ARX & MRX High Speed Commercial Oven Connect Oven to Network: 1. Touch the blue menu icon at the bottom of the screen.2. Touch the “Netw...

©2017 ACP, Inc. Cedar Rapids, IA 52404 Part No. 20217601 Original Instructions For full product documentation visit: www.acpsolutions.com 6 Quick Start Guide | ARX & MRX High Speed Commercial Oven 2 There are several options you can change to customize the operation of the oven for your business...

APPLICATION FOR EXEMPTION FROM MECHANICAL VENTILATION 1. Applicant Name(s):____________________________________________ Telephone: _______________________ Applicant Name(s):____________________________________________ Telephone: _______________________ 2. Facility Name: _____________________________...

© 2017 ACP, Inc. 225 49th Avenue Drive SW Cedar Rapids, Iowa 52404 Part No. 20218501 ACP Programming App Updated 10/2017 Page 1 of 6 ACP Programming App version is subject to change. Please use most recent release when available. For best results, use in conjunction with the latest oven firmware. To...

© 2017 ACP, Inc. 225 49th Avenue Drive SW Cedar Rapids, Iowa 52404 Part No. 20218501 ACP Programming App Updated 10/2017 Page 2 of 6 Change User Options: 1. To change the default language, select from options in the top-right drop down menu.2. Click on the User Options tab to access a variety of cus...

© 2017 ACP, Inc. 225 49th Avenue Drive SW Cedar Rapids, Iowa 52404 Part No. 20218501 ACP Programming App Updated 10/2017 Page 3 of 6 Create a New Recipe Tab 1. Click on the Tabs drop down menu and select the number of tabs desired. 2. To customize each tab appearance, click on the tab.3. Select one ...

© 2017 ACP, Inc. 225 49th Avenue Drive SW Cedar Rapids, Iowa 52404 Part No. 20218501 ACP Programming App Updated 10/2017 Page 4 of 6 Customize Recipe and Folder Images 1. Click on the image icon to chose an image for the recipe or folder. 2. Select one of the following options: a. “ Pictures ” tab t...

© 2017 ACP, Inc. 225 49th Avenue Drive SW Cedar Rapids, Iowa 52404 Part No. 20218501 ACP Programming App Updated 10/2017 Page 5 of 6 Edit an Existing Folder 1. Select “File,” then “Open.” Navigate to the location of your menu file and open it. 2. Click on the folder to edit the color, icon, image, n...

© 2017 ACP, Inc. 225 49th Avenue Drive SW Cedar Rapids, Iowa 52404 Part No. 20218501 ACP Programming App Updated 10/2017 Page 6 of 6 Save Menu Information For touchscreen models, files may be transferred via USB, WiFi or Ethernet connection. See below for best practices for each method of transfer: ...

May 2018 Xpress® Firmware Field Update Procedure 6.6.0 Prepare the flash drive: • Download the latest Xpress® Touchscreen firmware o Version 6.6.0 as of May, 2018 o http://acpsolutions.com/wp-content/uploads/2018/05/firmware_update_rev_6.6.0.zip • Extract the .zip file onto a blank USB flash drive, ...