Altinex VA6831FC - Manuals - manualsarea.com

Page 2 - INTERFACES; INTRODUCTION; Thank you for purchasing the; TABLE OF CONTENTS

INTERFACES 1 INTRODUCTION Thank you for purchasing the VA6831FC Dual Input/Switchable Analog Interface. We are sureyou will find it reliable and simple to use. Superior performance for the right price, backed bysolid technical and customer support is whatAltinex has to offer. The product you are hol...

Page 3 - PRECAUTIONS / SAFETY WARNINGS

INTERFACES 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your VA6831FC Interface. Keep this manual handy for future reference. These safety instructions are toensure the long life of your VA6831FC and to prevent fire and shock hazard. Please read themcarefully and ...

Page 4 - ABOUT YOUR INTERFACE

INTERFACES 3 ABOUT YOUR INTERFACE 2 There are several varieties of computers andcomputer video cards on the market today. Thereare also numerous data monitors and large screendata projectors. When displaying a computerimage on a large screen data projector or on alarge screen monitor, it often becom...

Page 5 - Frequency Compatibility

INTERFACES 4 Ohms) Cross-talk <80dB @ 1 kHz Signal-to-Noise Ratio >95dB Bandwidth 10 Hz – 40 kHz Stereo Channel Separation >75dB @ 1 kHz, >60dB @ 20 kHz Frequency Compatibility Horizontal 15-130 kHz Vertical 25-180Hz Minimum Video Bandwidth 350MHz Horizontal Position Range 20% Cross-talk...

Page 7 - BNC CONNECTORS

INTERFACES 6 4 . 3 MAIN (RGBS/RGBHV) OUTPUT THROUGH 6 BNC CONNECTORS BNC connectors offer a reliable connection forhigh-resolution video signals, and they facilitateeasy cable maintenance in the field. The mainoutput of the VA6831FC is configured with six BNC connectors. By selecting the appropriate...

Page 8 - MOUNTING CAPABILITY; APPLICATION DIAGRAM; TM

INTERFACES 7 4.8 MOUNTING CAPABILITY The VA6831FC can be easily mounted into an equipment rack. Four mounting holes areprovided on each side of the unit. To mount asingle unit, use Altinex 19”-1U Rack Mount Ears(part # DA1294FC ). To mount two units in tandem, use an Altinex 19”-1U Rack MountShelf (...

Page 9 - OPERATION; SYNC ON GREEN OUTPUT SWITCH

INTERFACES 8 light on the front panel of the VA6831FC should turn on. Step 4. Connect one end of the input cable tothe video output of the computer andthe other end to the 15-pin HD inputconnector of the VA6831FC . Repeat this step if two computers are to beinterfaced. Step 5. Connect a cable from a...

Page 10 - ACCESSORIES

INTERFACES 9 position of the image can be adjusted throughthe Horizontal Position Control knob located onthe front panel. Similarly, one can only adjust theposition of the image on the display for Input 2using the Horizontal position control knob whenthe CH2 Horizontal Delay switch is in the OFFposi...

Page 11 - TROUBLESHOOTING GUIDE

INTERFACES 10 FAQ (FREQUENTLY ASKED QUESTIONS) 9 No: Question Answer 1. When andwhy do Ineed to usetheHorizontalPositionAdjustmentknob? If you have multiplecomputers connected to asingle display through the VA6831FC , this control will be useful to adjust thehorizontal position of theimage for each ...

Page 12 - ALTINEX POLICY; LIMITED WARRANTY; shall have been repaired or altered; CONTACT INFORMATION

INTERFACES 11 ALTINEX POLICY 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables arefree from defects in materials under normal useand service. This warranty is limited to repairingat company’s factory any part or parts of theproduct, which upon company’s examinationshall disclose...