Altinex MX2436RM - Manuals - manualsarea.com

Page 2 - SWITCHERS; TABLE OF CONTENTS; ABOUT YOUR

SWITCHERS 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .................2 GENERAL ...........................................................2 RACK MOUNT SAFETY GUIDELINES ...............2 INSTALLATION ...................................................2 CLEANING .............................

Page 3 - PRECAUTIONS / SAFETY WARNINGS

SWITCHERS 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MX2436RM Switcher. Keep this manual handy for future reference. These safety instructions are toensure the long life of your MX2436RM and to prevent fire and shock hazard. Please read themcarefully and he...

Page 4 - TECHNICAL SPECIFICATION; Audio

SWITCHERS 3 required to correct the interference at his ownexpense. • Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. couldvoid the user’s authority to operate theequipment. ABOUT YOUR MX2436RM 2 The MX2436RM is Video and Audio Switcher designed to handle the switchi...

Page 5 - DESCRIPTION OF

Page 6 - AUDIO VOLUME CONTROL; Auto Switch; FACTORY RESET MODE; Factory Reset

SWITCHERS 5 There are two sections on the front panel of the MX2436RM : input select and switcher control. The buttons within the input select section allow for theactual switching of the source signals. The buttonswithin the switcher control section allow access tothe switcher setup features. 4.1. ...

Page 7 - APPLICATION DIAGRAM

Page 8 - OPERATION

SWITCHERS 7 INSTALLING YOUR MX2436RM 6 Step 1 . Make sure that the power input is set to the proper AC voltage for the country of usage.An incorrect setting may result in unitdamage not covered by warranty. Step 2. Connect the power cord to the unit andplug it into the power outlet. Step 3. Connect ...

Page 9 - Figure 1.

SWITCHERS 8 output within the selected auto rotation time.Audio inputs will also rotate, if AUDIO BREAKAWAY mode was not previously selected(Equalization will remain active). 6. To activate the AUTO SWITCH mode, press the“AUTO SWITCH” button. The LED, whichrepresents the AUTO SWITCH mode, will turn“...

Page 11 - Reset

SWITCHERS 10 2. [# SW n1 n2 n3 n4 n5 n6] - Audio Switch Input # = Switch number (no. from 1 to 9; default is 0). n1 = Audio input number (no. from 0 to 6). n2 = Break Away code: (0 = On; 1 = OFF) n3 = 1, audio key pressed n4 = 0, Sync Delay. The MX2436RM Switcher is equal to zero. It is not necessar...

Page 12 - Settings

SWITCHERS 11 6. [#Bn] - Beep ON/OFF # = Switcher module ID number (default is 0) n = ON/OFF switch n = 1 (Turns switcher Beep ON) n = 0 (Turns switcher Beep OFF) This command activates or deactivates the beeping sound when a key is pressed on the switcher module. Example: Sending the command [8B1] s...

Page 13 - This command sets a unique ID number to each; ACCESSORIES; RACK MOUNTING ACCESSORIES

SWITCHERS 12 This command sets a unique ID number to each MX2436RM Switcher module and allows control of multiple modules through a single RS-232port. In order to control multiple modulesindependently with one RS-232 port, the unit IDis used. Setting the unit ID allows a user tosend the same command...

Page 14 - FREQUENTLY ASKED QUESTIONS

SWITCHERS 13 FREQUENTLY ASKED QUESTIONS 9 No: Question Answer 1. How do Iknow whichinput isconnected towhich output? LED’s that representconnected video and audiowill light. 2. Can the MX2436RM be rackmounted? The MX2436RM can be rack mounted by itself orwith two units side by side.The width of the ...

Page 15 - ALTINEX POLICY; LIMITED WARRANTY

SWITCHERS 14 ALTINEX POLICY 11 11.1 LIMITED WARRANTY ALTINEX warrants that its products and cables arefree from defects in materials under normal useand service. This warranty is limited to repairing atcompany’s factory any part or parts of the product,which upon company’s examination shall disclose...