Altinex MX2106AV - Manuals - manualsarea.com

Page 2 - SWITCHER; TABLE OF CONTENTS; Page

SWITCHER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL .............................................................. 2 INSTALLATION ..................................................... 2 CLEANING ............................................................. 2 FCC...

Page 3 - PRECAUTIONS / SAFETY WARNINGS

SWITCHER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MX2106AV Switcher. Keep this manual handy for future reference. These safety instructions are toensure the long life of your MX2106AV and to prevent fire and shock hazard. Please read themcarefully and hee...

Page 4 - ABOUT YOUR SWITCHER; The; TECHNICAL SPECIFICATIONS

SWITCHER 3 ABOUT YOUR SWITCHER 2 MX2106AV 2-In, 2-Out VGA+3.5mm AUDIOAuto-Switcher The MX2106AV is a 2-In, 2-Out VGA + 3.5mm AUDIO Auto-Switcher. The MX2106AV automatically switches on signal detection, but mayalso be controlled manually if desired. The MX2106AV is designed to switch VGA signals and...

Page 5 - DESCRIPTION OF

Page 6 - APPLICATION DIAGRAM; DIAGRAM 1: TYPICAL CONFIGURATION

SWITCHER 5 APPLICATION DIAGRAM 5 DIAGRAM 1: TYPICAL CONFIGURATION In addition to automatic switching, the MX2106AV may be controlled manually with an external switch, or usingASCII commands over the RS-232 bus. If a remote switch is connected to the INPUT SELECT jack, INPUT 1 will be selected when t...

Page 7 - DIAGRAM 2: INTERNAL VIEW

SWITCHER 6 DIAGRAM 2: INTERNAL VIEW POWER SUPPLY CONTACT CLOUSURE RS-232 2.5mm 9V,500mA DC 3.5mm AUDIO VGA INPUT2 INPUT1 INPUT2 INPUT1 MP CONTROL SIGNAL DETECT OUTPUT1 OUTPUT2 3.5mm AUDIO OUTPUT2 VGA OUTPUT1 INPUT1 INPUT2

Page 8 - INSTALLING YOUR SWITCHER; Figure; OPERATION; MANUAL SWITCH MODE; L R GROUND

SWITCHER 7 INSTALLING YOUR SWITCHER 6 Step 1. Make sure that the correct power adapteris used. The Altinex power adapter issupplied with the unit. Connect the poweradapter to the power port. The INPUT 2indicator light should be ON and GREEN. NOTE: INPUT 2 is the default if there is no signal on INPU...

Page 9 - TROUBLESHOOTING GUIDE; we would like to offer the following suggestions:; The source has a problem.

SWITCHER 8 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found noproblems in the supplied MX2106AV unit. However, we would like to offer the following suggestions: 8.1 LEDs ARE OFF Cause 1: The power adapter is installedwrong. Solution 1: Make sure the adapter output isconnected to the P...

Page 10 - ALTINEX POLICY; Please see the Altinex website at; CONTACT INFORMATION

SWITCHER 9 ALTINEX POLICY 9 9.1 LIMITED WARRANTY/RETURN POLICY Please see the Altinex website at www.altinex.com for details on warranty and return policy. 9.2 CONTACT INFORMATION ALTINEX, INC 592 Apollo street Brea, CA 92821 USA TEL: 714 990-2300 TOLL FREE: 1-800-ALTINEX WEB: www.altinex.com E-MAIL...