Altinex MT110-103 - Manuals

Page 2 - MULTITASKER; TABLE OF CONTENTS

MULTITASKER 400-0197-006 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ................ 2 GENERAL .......................................................... 2 HANDLING ........................................................ 2 CLEANING...........................................................

Page 3 - PRECAUTIONS / SAFETY WARNINGS

MULTITASKER 400-0197-006 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT110-103 and keep it handy for future reference. These safety instructions are to ensure the long life of your MT110-103 and to prevent fire and shock hazards. Please read them carefully a...

Page 4 - X8 Mono Audio Matrix Switcher; TECHNICAL SPECIFICATIONS

MULTITASKER 400-0197-006 3 ABOUT YOUR MT110-103 2 MT110-103 8X8 Mono Audio Matrix Switcher The MT110-103 is a Balanced Audio Matrix Switching Card. This card allows any input to be independently switched to any or all of the outputs. All inputs and outputs can be wired for unbalanced audio, or they ...

Page 5 - PRODUCT DESCRIPTION

Page 6 - APPLICATION DIAGRAMS; DIAGRAM 1: TYPICAL SETUP

MULTITASKER 400-0197-006 5 APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MT 110-103

Page 7 - DIAGRAM 2: INTERNAL VIEW

MULTITASKER 400-0197-006 6 DIAGRAM 2: INTERNAL VIEW IN8 IN6 IN7 MATRIX CONTROL + _ _ + _ + IN1 IN2 IN3 IN4 IN5 TERMINAL BLOCKS _ _ + _ + _ _ + + MATRIX SWITCHER + OUT8 OUT7 OUT6 GAIN S/W GAIN S/W GAIN S/W OUT1 OUT2 OUT3 OUT4 OUT5 S/W GAIN GAIN S/W GAIN S/W GAIN S/W GAIN S/W TERMINAL BLOCKS

Page 8 - OPERATION; Use uppercase letters for all commands.

MULTITASKER 400-0197-006 7 INSTALLING YOUR MT110-103 6 Step 1. Turn off power to the MultiTasker enclosure. Step 2. Slide the MT110-103 into an available slot in the MultiTasker enclosure in order to connect to the bus. Make sure that the MT110-103 card fits into place. Secure the card to the MultiT...

Page 9 - DESCRIPTION OF COMMANDS

MULTITASKER 400-0197-006 8 7.2 DESCRIPTION OF COMMANDS Each command consists of three parts: Function, Card ID, and Unit ID. [ Function , Card ID , Unit ID ] Example: [VERC3U2] VER = Function C3 = Card ID or Group ID U2 = Unit ID (optional for Unit ID 0) For Function, see a detailed explanation unde...

Page 15 - Connect Input 1 to Output 1 for the

MULTITASKER 400-0197-006 14 17. [IO] This command connects a single input to a single output in the current matrix configuration. Command Format: [ImOxCn] m = Input (m= # from 1 to 8) x = Output (x = # from 1 to 8) Cn = Card ID (n = slot # from 1 to max slots) Example: Connect Input 1 to Output 1 fo...

Page 19 - RAMP TIME = 16 SECONDS

MULTITASKER 400-0197-006 18 37. [RAMP=x] This command sets the ramp rate for 32 steps. The range is from 4s to 18s, in 2s steps. Command Format: [RAMP=xCn] x = Rate in Seconds 4 = 0.13 seconds/step 6 = 0.19 seconds /step 8 = 0.25 seconds /step 10 = 0.31 seconds /step 12 = 0.38 seconds /step 14 = 0.4...

Page 20 - Ci

MULTITASKER 400-0197-006 19 39. [SIDn] This command sets all the cards installed in the MultiTasker system to the same card ID. After sending this command, all cards will be addressed with the same ID. Use caution when sending this command to a system with multiple board types. Command Format: [SIDn...

Page 23 - MENU

MULTITASKER 400-0197-006 22 7.4 MENU MODE Menu Mode commands allow virtually the same functionality as programming commands. Unlike the programming commands in the previous sections, menu commands prompt the user to select from a list of available options. The system then responds based upon selecti...

Page 24 - Switch Input 2 to Output 1

MULTITASKER 400-0197-006 23 7.4.4 MT110-103 MENUS Following are the menu items available on the MT110-103 ’s Main Menu. The expanded menu contains values that indicate the current setting or value of a parameter. The value is usually in parentheses, or otherwise indicated at the top of a sub-menu. I...

Page 25 - TROUBLESHOOTING GUIDE; would like to offer suggestions for the following:; Card cage is not plugged in.; Solution 2; The source level is above 1Vp-p; Solution 1: Make sure that the source signal

MULTITASKER 400-0197-006 24 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found no problems in the supplied MT110-103 ; however, we would like to offer suggestions for the following: 8.1 LED IS NOT LIT Cause 1: Card cage is not plugged in. Solution: Plug card cage in. If the LED lights, ...

Page 26 - Volume levels are inappropriate.; ALTINEX POLICIES; CONTACT INFORMATION

MULTITASKER 400-0197-006 25 8.5. SOUND LEVEL IS LOW Cause 1: Volume levels are inappropriate. Solution 1: Turn up the source volume. If sound level is still low, see Solution 2. Solution 2: Turn up the destination amplifier volume. If the sound level is still low, see Cause 2. Cause 2 Poor signal tr...